Water Pumps Dealers in Jogeshwari, Mumbai

True Vacc Water-ring vacuum pumps are rotary pumps using water as sealing fluid.  It basically consists of cylindrical casing with control disc on either sides.  Inside this consists an eccentrically located balanced impeller with curved blades.  The liquid introduced is set into rotary motion by impeller forming a water ring concentric with casing.  Cells formed between the blades and the ring vary in volume from maximum to minimum with each revolution.  The suction medium enters this space through the opening in control disc & are then compressed out through the exhaust pipe alongwith the sealing liquid. Unique Features It is mainly as vacuum pump but can also be used as compressor. Simple and trouble free operation. Moist Air, aggressive gases, vapors and dust laden gases can be handed. No metallic contact inside pump, no wear & tear. Construction in Cast Iron, Phosphorous Bronze, Gun Metal SS. 304, SS.316 Etc No contamination of medium passing through. Compact unit due to direct drive/belt drive Simple construction & easy maintenance Maximum Vacuum up to 710 mm Hg in Single stage.   Application    

• Material: Stainless Steel
• Shape: Round
• Color: Metallic
• Application: Industrial
• Surface Finishing: Coated
• Pack type: Box

Sleeve mounted, rubber bellow seals of compact unitised design. Suitable for small shaft diameter, general low pressureapplications.Characteristics Unbalanced Mechanical Seal. Dependent on direction of rotation. Operating Limits p: <6 Bar ; V: <10 m/s T: -15 / +120ºC Temperature is based by material selection. Operating limits are based on PV factor.

• Pressure: up to 5 Bars
• Temperature: -20 to 150°C
• Shaft Dia: 0.375”, 0.500”, 0.625” & 0.750”
• Speed: up to 25 m/s
• Seal Face: Carbon, Silicon, Ceramic, TC
• Secondary Seals: VITON/PTFE/EPDM
• Metal Parts: SS 316,Alloy 20,Hastelloy C

Supported by our experience of the industry, we have been able to manufacture, supply, trade and export a qualitative range of Water Pump Mechanical Seal used in various industries. Water Pump Seals is a compact, single-spring, elastomer bellows mechanical seals. Water Pump seals are designed for use in small centrifugal water pumps, deep and shallow-well jet pumps, swimming pool pumps, submersible pumps and waste water pumps.    Application Sewage Water.Light Chemical.centrifugal water pumps.submersible pumps.waste water pumps.

Marine Diesel Engine Spare Parts. Offered range includes Sea Water Pump, Marine Sea Water Pumps, Handle Start Set, Canned Motor Pumps, Power Take Off Unit, Marine Water Pump 1-1.4 Hp Oil Type and numerous other products. These products are designed as per the special requirements given by the clients. Therefore, offered products are highly reliable wide applications, prolonged service life and acclaimed by the clients for their excellent efficiency, low maintenance, robust construction and low maintenance

• Country of Origin: Made in India
• Material: Steel
• Brand: Typhoon
• Usage/Application: Pump Head

We are PP Centrifugal Pumps Manufacturers and Suppliers in India (Mumbai) which are made of thermoplastic glass filled (Polypropylene) materials and are suitable for high corrosive Chemical liquids. Thanks to the innovative Polypropylene system it reduces the risks of losses and the maintenance costs In Chemical Industries. This guarantees the maximum safety and efficiency. PP Centrifugal Pumps structure is really simple and requires a very minimal maintenance. Result in save of time and repairing and reduces spare parts costs. Polypropylene Horizontal Centrifugal Chemical and Acid pumps conceived for industrial applications, production lines and ecological facilities. Where resistance to chemical aggression must be coupled with reliability and easy maintenance. These Pumps are mainly used in Acidic, Corrosion and Hazardous Chemical Environments. Their particular construction pumps eliminate the possibility of any contact between metal parts and the liquids. While the selection of materials and manufacturing technologies guarantees compatibility with the products handled a long operating life and conformity. The adoption of pumps with these characteristics eliminates are safe even in case of breaks. Hazardous Chemical leaks are easily handled by a System of Back Pull Openings. Allowing the absolutely safe pumping of chemical substances.

• Size: 32 mm
• Brand Name: Mexico Engineering
• Material: Stainless Steel
• Usage/Application: Industrial
• Pressure: 15 bar

We are the supplier of this product.

• Volts: 24V
• Current: 1.10A
• In Pressurwe: 10 PSI
• Working Pressure: 70 PSI
• Working Flow: 1100ml/min
• Open Flow: 1400ml/min

Voltage: AC110V-230V 5060HZ Power : 400W Laser: 100mW 650nm wavelength red laser; 30mW 532nm wavelength green laser Warm-up Time: 5 minutes Tank Capacity: 0.5L Spray Distance: 3.5m Smoke Output: 5000Cu.ffmin Control Mode: Wire control or remote control (optional).

• Material: Mild Steel
• Certification: CE Certified
• Frequency: 50Hz
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1 Yr
• Rotation Speed: 2 Rpm
• Automatic Grade: Automatic

UPVC Section (Used for Cabins)  Superior finish, concealed Piping, permanent structure. Fully automatic sensor based control. Manufacturing on order based. Looking for buyers from: Worldwide  

• Size: 2inch, 3inch, 4inch, 5inch
• Material: Neoprene Rubber, Rubber, Silicone Rubber, Steel
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Application: Cylindrical Shockers, Pumps, Valves
• Color: Black, Grey
• Feature: Accurate Dimension, Fine Finish, Good Quality, Heat Resistant

We are accredited as the respected Compressor Valve Assembly Manufacturer and Supplier based in Maharashtra, India. Our Compressor Valve Assembly is precisely designed by our skilled engineers using hi-tech machines and modern equipment. Buyers can obtain bulk quantities of Compressor Valve Assembly at very reasonable rates. With the help of our quality management system, we ensure defect-free range of Compressor Valve Assembly at buyer’s end.

We offer high quality Automotive Engine Water Pumps for our global clients. Our Automotive Water Pumps are manufactured using high quality raw material that ensures smooth functioning and high reliability of our product range. Our Automotive Water Pumps are widely appreciated for smooth running under high temperature conditions and widely used in various automobile applications. We offer our Automotive Water Pumps in varied specifications to match the clients̢۪ diverse requirements. Product Range (Please contact us for complete range) : We can develop engine water pumps as per customer samples and / or drawings. We have developed a large range of water pumps for agricultural, heavy duty, automotive, construction and other applications Click Here For Technical Specifications

• Size: 1inch, 2inch, 3inch, 4inch, 5inch
• Type: Valve Assembly
• Material: Steel
• Thickness: 10-20mm, 20-30mm
• Application: Industrial
• Color: Metallic
• Feature: Accurate Dimension, Easy To Install

We are engaged in supplying and exporting premium Compressor Valve Assembly that is extensively used in various industries. We make sure that our customers get Air Compressor Valve Assembly at the best possible prices and this is why we are highly appreciated by the clients. Some of our esteemed clients include sugar, textile and chemical industries that avail our products in bulk quantities. These Compressor Valve Assemblies can easily fit in to different kinds of industrial machineries. Our Air Compressor Valve Assembly is ordered from every nook and corner of the world, as we are one of the leading Valve Assembly Suppliers in India. Different Designs Available Ring type Reed type Channel type Concentric type Dampened disc type Raw Material Used: Stainless steel Carbon steel S.G. iron Range Stal : P 22/ 24, ALFA, STALL 75mm Bitzer : F, G, H, J, M Bock : F3-4, FK3-4, F5-FK5 Carrier : 5F & 5H40, 5H120, 06E, 6D Copeland : 9RB, 4RH, 4RJ Diakin : C55, C75 Grasso : AC70, RC11, KC, PC2, KA85, RC6, RC9 Sabroe : SMC-65, SMC-100, CMO-14, CMO-28, CMO1, CMO2 Trane : Open E & F Stal : U Series York : JS Series

• Type: Sewage Pump
• Material: Cast Iron, Iron, Stainless Steel, Steel
• Application: Industrial
• Color: Black, Blue, Grey, White, Yellow
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1 Year, 2 Years

Clients can avail from us Multi Stage Submersible Water Pump that is high in demand due to high performance. Designed using the advanced production techniques, the Multi Stage Submersible Water Pump is reliable and requires least maintenance. Buyers can obtain ISIISO Multi Stage Submersible Water Pumps in different specifications from us. We are a trusted name as Multi Stage Submersible Water Pump Supplier in Mumbai (Maharashtra).

• Application: Industrial Use
• Color: Silver
• Finishing: Polished
• Pressure: High, Low
• Feature: Highly Durable, Rustproof
• Corrosion Proof: Yes

We are the main supplier of this product.