Water Pumps Dealers in Vikhroli, Mumbai

The Solar Water Pumping System basically consists of Solar Photo Voltaic Modules. Panel Mounting Structures. MPPT based DC to 3 Phase Variable Frequency Inverter Controller. 3 Phase Submersible Pumps or Surface Monoblock Pumps.   Features Can be used to run existing Water Pumps. Maximises the use of Sun energy, using Microprocessor Controlled MPPT Scheme. Totally independent of Grid supply, hence no electricity bill. Enhances the life of the pump by using the SPWM technology. Can be installed in any remote area, with adequate sunshine. Can draw water from any depth. Low Maintenance. Pump will work during the entire day when sun shines.

Dewatering Pumps 1HP To 100HP In MOC Up To 7.5HP Alumn & Above CI Standard For Handling Muddy Water, Storm Water & Tunnels.

• Maxi Dia (mm): Up to 200 H.P.

Polder Pump is a compact designed Pump below the Motor by which maximum lowest pumping level is possible, unit Consist of a Vertical Conventional Centrifugal Pump Driven by an electro water lubricated, water filled submersible motor, There is a common shaft between pump and motor, The Pump & Motor Unit is of close coupled construction and the double casing design provides effective water flowing around the motor casing, a perfect isolation between these two is achieved with the help of a mechanical seal make up of Tungsten carbide which is protected and covered by leap seals, double sealing arrangement keeps motor away from the liquid being pumped and high grade corrosion resistance & abrasion resistance material is being used. All material used are eco - friendly.

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers.

• Stone Name: Selenite
• Use/Application: healing and meditation

Triton Pump Packages  Fine Finish Spray PackagesApply a high quality, decorative finish to wood and metal parts with this double diaphragm pump packageTriton is an air-operated diaphragm spray package that applies a high quality, decorative finish to wood and metal parts. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.Supplies up to 35% extra air flow to gun for superior atomizationSaves material and time during flushing, priming and color changesDelivers a consistent spray pattern and uniform film thicknessSprays a wide variety of material viscositiesReduces operator fatigueFeatures:High quality finish, low pulsation output and smooth pump changeover deliver a consistent spray patternQuick color changes and fast material refills save time and moneyRugged, stainless steel or aluminum construction pump handles a wide variety of fluidsMaterial:Solvent Based-PaintSolventborneSingle ComponentVarnishesLacquersEnamelsLatexHigh solidsCARCMetallicsStainsEpoxiesApplications:Light Commercial PaintingModerate CommercialHeavy CommercialGeneral Metal Finishing-PumpingGeneral Metal Finishing-SprayingWood Finishing-PumpingWood Finishing-SprayingPlastic Finishing-PumpingIndustries:Furniture Finishing/ManufacturingGeneral Metal Finishing/ManufacturingWood Products ManufacturingMarineRailroadsTruckingFleetsWood & Wood Products-PumpsWood & Wood Products-Spray gunsHeavy equipment ManufacturingAgricultural Equipments/ManufacturingAutomotive ManufacturingCARCPersonal Recreation VehiclesRVsAerospace FinishingForestry Equipments

• Material: Brass
• Color: As Per Requirement
• Brand Name: Systematrix Engineering Services
• Orifice Diameter: 0-0.5 mm, 0.5-1 mm, 1-2 mm
• Thread Size: 1/8

• Weight: 20-50 kg
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year
• Material: ss-304 or ss-316 sheet
• Speciality: Rust resistance

• Capacity: 50ml to 500ml
• Material: HDPE
• Application: Hand Sanitizer Packaging
• Color: Transparent, White, etc
• Cap Type: Flip Top Cap

We offer solar water pump. • dc solar pump upto 2 hp

• Usage: For Cutting

• Brand Name: UEW
• Pressure: 130-150 bar
• Warranty: 6 Months
• Power Source: Electric
• Max Flow Rate: 1500-2000 Psi
• Material: MS
• Model: X-SERIES
• Motor Horsepower: 20
• Phase: 3 Phase
• Automation Grade: Automatic
• Maximum Discharge Flow: 150 bar
• Portable: Yes
• Motor: 5 - 20 HP
• Speed: 1450 RPM
• Discharge Flow: 10-40 LPM Max

• Head: one
• Motor Horse Power: 2-10 HP
• Motor Phase: Three Phase
• Type Of End Use: Industrial
• Stages: Multi-Stage
• Brand: Lubi
• Features: yes

Product Range:   Solar water pumps, Solar submersible water pumps,    Solar power water pumps, Solar powered submersible water pumps. Solar water pumps are specially designed to lift water for irrigation, horticulture farms, gardens, drinking and other similar applications.  

• Material: SS
• Flow range: Up To 78 Meter Cube/hour
• Water temperatur: Upto 45 Degree Centigrade
• Max. Sand quantity into the water: 50 gram per meter cube
• Max. Starts per hour: 20 at regular intervals

• Motor Phase: Three Phase
• Motor Horse Power: 2 - 5 HP
• Features: Precise dimensions, Rigid construction, High precision

• Disifection: For Humans
• Usage/ Application: For Commercial
• Pressure: 7 -10 Time Every Man
• High Quality Material Used: Iron
• Chemical Tank Capacity: 50ltrs

The centrifugal pump is the most used pump type in the world. The principle is simple, well-described and thoroughly tested, and the pump is robust, effective and relatively inexpensive to produce. An increase in the fluid pressure from the pump inlet to its outlet is created when the pump is in operation. This pressure difference drives the fluid through the system or plant. The centrifugal pump creates an increase in pressure by transferring mechanical energy from the motor to the fluid through the rotating impeller. The fluid flows from the inlet to the impeller centre and out along its blades. The centrifugal force hereby increases the fluid velocity and consequently also the kinetic energy is transformed to pressure. Like most pumps, a centrifugal pump converts rotational energy, often from a motor, to energy in a moving fluid. A portion of the energy goes into kinetic energy of the fluid. Fluid enters axially through eye of the casing, is caught up in the impeller blades, and is whirled tangentially and radially outward until it leaves through all circumferential parts of the impeller into the diffuser part of the casing. The fluid gains both velocity and pressure while passing through the impeller. The doughnut-shaped diffuser, or scroll, section of the casing decelerates the flow and further increases the pressure. Key features OF CENTRIFUGAL PUMP The pumps are simple to clean and maintain. The pump casing being removable in a matter of seconds without the use of tools. Impeller, mechanical seal can be changed without difficulty & replacement parts are available ex-stocks. End connections can be flanged, SMS/DIN type fittings etc.

The Fireman Axe is a multipurpose tool for firefighting use. Made from forged steel, the axe has a rubber insulated handle, tested to 20,000 volts.

We are offering submersible pumps

• Features: Ideal for promotion, advertising, premium and office., Ballpen with sprayer, can fill with liquid,such as hand sterilizer, alcohol, perfume, etc.
• Form: Liquid
• Packaging Size: 10 ml
• Packaging Type: Pen Sprayer
• Brand Name: Giftana
• Application: Pen with Sanitizer Spray
• Alcohol Content %: 71 - 80

• Brand Name: Bio-x
• Power Source: Battery
• Fuel Tank Capacity: 6.5 ltr
• Chemical Tank Capacity: 1 L
• Voltage: 230 VAC 
• Usage/Application: Hospital/Clinic
• Frequency: 50/60 hz .
• Type: Handy Fogging Machine
• Feature: Eco friendly
• Model: Biox fogger machine
• Automation grade: Automatic

• Type: Water Pumps
• Certification: CE Certified, ISO 9001:2008
• Weight: 100-120kg, 20-40kg, 40-60kg, 60-80kg, 80-100kg
• Power Source: Electric
• Usage: Agriculture, Deep Well Pumping, Household, Industry
• Operating Type: Automatic, Manual, Semi Automatic
• Power: 1Bhp, 2Bhp, 3Bhp, 4Bhp, 5Bhp, 6Bhp
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: Diaphragm Pump, Gear Pump, Multistage Pump, Single Stage Pump
• Driven Type: Electrical
• Voltage: 0-110 V, 110-220 V, 220-440 V

Our company name figures among trustworthy Suppliers of Submersible Pumps based in Maharashtra, India. The best quality material and ultra-modern techniques are used their production. Offered by us in different sizes and grades, our Submersible Pumps stand out of the rest due to their high-strength, non-corrosive nature, sturdy-built and longevity. One can get them at modest prices, from us.   Our Product Range : 100 mm well size (4”) 150 mm well size (6”) 200 mm well size (8”) 250 mm well size (10”) 300 mm well size (12”) High Pump Efficiency : The innovative mechanical design and advanced manufacturing technology is such as to enhance the pumping efficiency, variable-speed and durability, leads to less energy consumption.Applications : Pumps are designed for the applications like - Irrigation systems, Nurseries and Gardening Booster systems Domestic water supply Groundwater lowering Industrial application

We can offer you various brands for High Pressure sprayer. Some of our successful applications for High pressure washing are Pressure sprayer.

• Type: Dewatering Pump
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Application: Industrial
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Warrenty: 1 Year, 2 Years

We are a leading manufacturer and supplier of Submersible Pump in Mumbai

• Color: BLACK
• Usage/Application: Hospital
• Machine Capacity: 6 LTS AND 8.5 LTS
• Area Coverage: 3000 SQ FT
• Machine Size: Mini
• Material: Stainless Steel
• Brand: BIO-X
• Motor Speed: 20000 RPM
• Dry Weight: 6 KGS
• Power Supply: 230 V

Dewatering Pumps are self priming, single stage, Centrifugal Pumps driven by A.C. squirrel cage induction motors in a fully submersible construction. They are easily transportable and have a wide variety of applications. These are powerful submersible contractor pumps designed for draining abrasive water from construction sites, mines, docks, flooded areas, etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. The pumps have an excellent performance capacity with high motor power combined with compact light weight design.