Water Treatment Plant Dealers in Midc, Mumbai

Our Industrial Reverse Osmosis Systems are engineered to economically produce high purity water by removal of dissolved minerals, particles, and other impurities. Each system is constructed using the highest quality components and materials for reliable operation and exceptional performance.We ensure the compliance of our products with the defined industry standards and quality guidelines. Our standard machines are available with product water outputs from 200 LPH to 2000 LPH. We also offers a wide variety of customised system for pre/post treatment, distribution pumps, and integrated controls for a complete water treatment system.Our specialty is skid mounted, pre-piped, and pre-wired equipment allowing for quick installation and start-up time. We are always ready to work with you to design a customized system meeting your water treatment requirements at leading market price.   Features: Compact, Sturdy & Ergonomically DesignMulti-Functional Control PanelConvenient Auto Flushing SystemControlled Reject Recovery System.Inlet & Outlet CIP (Clean-In-Place) Arrangements.Including Tank Float Valve for Auto cut-off.

The Indoor Unit is ideal for small offices, houses, retail outlets, hospitals and clinics. The unit makes up to 20 liters per day in relative humidity of 50%. The unit is also equipped to use city water as the input source to deal with a sudden increase in demand. The superior filter system in this unit ensures that the dispensed water is filtered through a three stage filter i.e. carbon , sediment and ultra filter, thus removing all unwanted particles, odor and delivering pure water with less than 0.02 micron partial. With recent advanced technologies like ozonation, the water is treated with ozone to kill all the harmful bacteria and viruses to produce pure & safe drinking water.

• Features: Multi Column Distillation Plants , Pure Steam Generator, Combo Still Generator, WFI storage & Distribution Loops, Pure Steam Distribution Loops .

• Capacity: 1-100L
• Body Material: Stainless Steel
• Power: 0-3 Kw
• Power Source: Electric
• Industrial Use: Industrial
• Voltage: 220
• Control Type: Automatic

deodorizing plant, Rape Seed Solvent Extraction Plant Machinery

The plant consists of: 1 complete neutralization tank agitator solutions to neutralize # 1 filter press with pneumatic pump   The press is used for the filtration of the neutralized solutions and retain the oxides of copper, zinc etc. destined to companies authorized to process them.   The structures of the filter press, from smallest to largest, are of the monolithic type, realized in carpentry and subjected to electro-mechanical controls and accurate machining. In the design we were considered unitary stresses in the materials contained within very low values, even at maximum operating pressure. The heads and the longitudinal members are coated stainless steel or other materials according to the chemical characteristics of the liquid to be filtered. In the filtering elements, the fabric, the shape and dimensions of the plates, as well as the materials used, they represent the most important part. The selection of these items is the result of years of experience of those who know these problems. The pump is equipped with electronic control by means of the probe level for the drive and the automatic shutdown.

• Type: Coarse Bubble Diffuser
• Brand Name: EDI
• Model Number: MaxAir
• Place of Origin: US
• Stailess Steel: Diffusers

EDI bring SS coarse bubble diffusers. Why EDI’s Stainless Steel MaxAir is the best on the market ? 316 stainless steel construction High-temperature resistance—will not fail in high-temperature settings Clog resistant—designed for harsh environments Highest airflow capacity for efficiency Rugged heavy-duty construction for worry-free maintenance Excellent for mixing and for demanding applications. For more details on EDI coarse bubble diffusers and other aeration solution please contact us.

• sizes: 60-1000 m2/m3
• diameter: 8.0m

manufactured distillation equipment provides high efficiency in the separation process which directly leads to the reduction in the column height and also in lowering the pressure drop. They are available in 45 and 60 degrees of cramp angles, up to 8.0m of diameter sizes and 60-1000 m2m3 of surface areas. Because of adopting special surface treatment in our manufacturing, we are proficient in delivering such distillation equipments which are known for their low pressure drop and exceptional wetting features. Our products are efficient in making high contact area with the rising vapor and the downwards coming liquid. We are moving our trade on a global scale through adopting the new advanced technology that helps in making this process more proficient and less labor oriented.

• Type: Water Distillation Unit
• Application: Water Distillation
• Color: White
• Capacity: 20L/Hr
• Driven Type: Electric
• Country of Origin: India
• Automation Grade: Automatic

Distillation removes organics impurities, as well as colloidal solid from water. Borosil glass distillation unit continue to be the most effective and economical method of producing pure water for laboratory use. By contrast dye lasers are effective on;y in removing those substance that are ionized moreover, the resins contribute organic impurities to water resulting in an environment conducive to bacterial growth in course of time. Borosil distillation unit are designed to produce a distillate of considered purity. the unit of horizontal borosilicate boiler, condenser and a quartz heater. All the parts are replaceable.

• Application: Laboratory
• Color: Available in various Colors

Features Certified CE, ISO 9001, ISO 14001 Obtained GD, QD Mark (Good Design, Qualified Design) Auto regular recycling every hour Standby function : Auto recyclinglower than setting value. Programmable by 2 steps for the filter exchanges to maintain water quality. 254/185 UV lamp MW 5000 UF filter PVDF 1/4 Dispensing gun   Included Filter & Accessories : Prefilter, Super A/C Filter, RO Pack, Power UP Pack, Level Sensor, Manul, Hand Lever, Power cord   Optional Accessories : PVDF1/4 Dispensing gun, Pretreatment system, Low pressure valve, Wallmounting bracket, Frame, Water Tank, Vent Filter.

• Type: Mineral Water, Pure Water
• Material: Mountain Water, Plain Water
• Application: Drinking
• Certification: ISO 9001: 2008
• Color: Clear
• Weight: 100ml, 2L
• Shelf Life: 1 Year

RaviKiran is a renowned Multicolumn Distillation Plant Manufacturers in India that is designed to produce sterile, pyrogen free distilled water conforming to I.P.B.P.USP & LAL test specifications with conductivity of 0.2 - 0.3 microsemenscm² suitable for the use in preparation of injections and I.V. Fluids. It is provided with an electronicPLC based fully automatic panel board and is available in various output capacities from 50 ltrshr to 3000 ltrshr. Injectable Section:-Manufacturer and Supplier of Multicolumn Distillation Plant that is designed to produce sterile, pyrogen free distilled water conforming to I.P.B.P.USP & LAL test specifications with conductivity of 0.2 - 0.3 microsemenscm² suitable for the use in preparation of injections and I.V. Fluids.

The effluent treatment plants are designed to treat the effluent coming from different areas of the plant. The treatment of different effluents varies with the type of effluent. Water effluent treatment systems are designed to treat effluent. The water from the production area is collected in common collection sump from where water is pumped through the plate interceptor. Our effluent treatment plant consists of three stages namely primary treatment, secondary treatment and tertiary treatment. The effluent water is passed through various processes such as chemical dosing, aeration, and settling. The final treatment filtration cum absorption takes place by filters. Finally, the processed water goes for advance treatment to common effluent treatment plant viz ms. Enviro technology limited, ankleshwar.

PP CLARIFIER 2868 is a high performance sorbitol based clarifying agent that Reduces haze and enhances the clarity of polypropylene through nucleation of The polymer. This also leads to enhanced stiffness of the molded part and to Shorter cycle times during the molding process. PP CLARIFIER 2868 is produced using a highly sophisticated process that Makes it a unique product for clarifying polypropylene.

UNIQUE DESIGN BLINEX's POLYFLEX ™ & POLYPOR ™ unique open-end tube design diffuser allows water to completely fill the diffuser support tube, thus eliminating diffuser buoyancy and not allow Diffuser to bounce during operation and there is not breakage / failure of nipple end connection. Properties: Filter the finest suspended particles. The cartridges have uniform pore size, smooth surface, lightweight, odorless, tasteless, non-toxic, and resistant to shocks and impacts The unit withstands the pressure up to 150 PSI. The flow rate form 4 to 15 LPM in different microns cartridge Typical Application: Bio-logical waste water treatment Used in streams & fish ponds (Aquaculture) Activated sludge waste water aeration Industrial waste water treatment plant Municipal waste water treatment plant Waste water ozone diffusion Oxygenation for sludge stabilization Recarbonation, Nitrifications, Grit tanks, Grease removal and Floc-Agglomeration Contact aeration system Sequencing batch reactor (SBR) Lagoons & Channels Advantages High Oxygen transfer efficiency Self cleaning operation Fine bubble formation Non - clog operation Intermittent operation without water back flow Easy & quick to install No moving part - assures safety Material resistant to waste water Unbreakable, light weight & Heavy duty membrane to withstand high pressure Low pressure loss across diffuser Economic operation due to low investment & operation cost Through intermixing of water and sludge components & uniform concentration of oxygen throughout the tank Negligible emission, odour, aerosols & noise Enormous power saving

Sulzer (ABS) Venturi Jet Aerator is ideal for applications that require a combination of aeration and mixing.

Sewage Treatment plant employees latest and proven technologies to treat any kind of waste water and produce required quality of treated water. High efficiency and large treatment capacity. Compact arrangement saves installation space. Presentation websites Pre assembled design save installation cost. Minimum maintenance cost.

• Color: Black
• Features: Triple Layered RO+UV+UF Protection, High Purification Capacity, Aqua Taste Booster, Copper Impregnat
• Dimensions: 362 x 244 x 425 mm
• UV Lamp Wattage: 4W
• UV Lamp life span: 6000 hrs
• Ambient water capacity: 6 L
• Product Weight: 8 Kg

• Condition: New
• Capacity: 100-1000L
• Body Material: Food Grade Resin, Frp
• Power: 0-3kw
• Power Source: Electric
• Industrial Use: Laboratory
• Control Type: Semi Automatic

We offer Reverse Osmosis. Vasu-PWT range of products includes Antiscalants, Biocides, Membrane Cleaners, Filter Aids manufactured under license from Professional Water Technologies INC, USA Our products are designed to support plant designers, OEMs and end users to optimize Membrane performance. Key Features are Dendrimer based chemistry Compatible with most membranes Environmentally friendly (phosphate free) Drinking Water Approvals - ANSINSF 60 compliant Superior plant conversionRecovery Lower dosage rates Reduced Cleaning frequency Lower maintenance costs Ease of operation Antiscalants

• Type: Sewage Treatment Plant
• Application: Recycling
• Certification: CE Certified, ISO 9001:2008
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Black, Green, Grey, Silver, Sky Blue
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years

We offer vertical shaft surface aerators that provide mechanical means of oxygen transfer to sewage or industrial effluent for treatment. The fixed type aerators are mounted on a RCC or M. S. platform to the ground. The impeller is conical and the RPM of the aerator range from 45-60. The material of construction can be carbon steel construction or stainless steel construction as per the client’s requirement. Our surface aerators can be installed in any configuration within aeration lanes thereby enhances treatment capabilities from small communities to major installations. These units can also be offered in fixed and floating aeration options. In floating aerators, the device is supported on floating pontoons which are interconnected through a steel frame forming floating platform around the aerator. Applications • Steel Industry Blast Furnace, Electric Arc Furnace, BOF, etc • Fertilizer Industry Phosphate Rock Dryers & Calciners, Dryers • Non-Ferrous Copper Reverberatory Furnace, Laea Blast Furnace • Pulp & Paper Lime Kilns, Back Liquor Recovery, Bark Boilers • Sugar Industry Boiler Flue Gas, Bagging Section • Mineral Products Asphalt Stone Dryers, Cement Kilns • Pharmaceuticals Tablet Coating Fans, etc

DM plant consists of two Beds (Cation & Anion) and Mixed Bed Water Quality (Conductivity) from Two Bed Outlet will be between 15 to 20 micro siemens. Water Quality (Conductivity) from Mixed Bed Outlet will be less than 1 micro siemens. First raw water is passed through the cation resins column (H+ form), which converts all ionized salts to the equivalent mineral acids.

• CAPACITY: 50 to 2500 Ltrs.

Purified water with max. conductivity of 0.5 micromhoscm. should be used. Pressure should be 1 kgcm² higher than the in feed steam pressure. Temperature – Ambient 30ºCSave water consumption & Boiler steam consumption. Complete close loop system. No air contamination. On line conductivity. If sub standard conductivity will come dumping automatically through 3 way valve

• Brand: Ate
• Venturi Chamber Housing: C.I GG 20
• Flow Range: 50-500 m3/hr
• Frequency: 50 Hz
• Range: 100C CB1 to 200G CB1
• Size Range: 1.3-18.5 kW
• Head Range: 0-16 m

• Type: Water Filter
• Application: Water Recycling
• Certification: CE Certified
• Color: Creamy, Off White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 10-15kw, 15-20kw, 20-25kw, 5-10kw
• Driven Type: Electric, Solar
• Working Temperature: 0-50%, 50-100%
• Warranty: 1year

• Driven Type: Electric
• Voltage: 220V
• Feature: Good oxygen transfer & aeration efficiency values, Self cleaning system, Easy & quick installation without emptying the tank, Replacable wear parts.

Hydrocons delivers latest concepts for Purified water storage & distribution system. Purified water generated from purified water generation system shall be transferred to the Purified water storage tank This Purified water from the storage tank is then re-circulated in a closed loop to various user points with the following features. The storage tank assembly consisting of-   SS316L wetted parts, Jacketed, SS Cladded.-   Dished ends at bottom for complete drainability and at top to avoid stagnation.-   Spray ball located at the center nozzle (loop return) on the manhole for continuously wetting     all the contact parts on the top surface of the tank including the manhole internal surfaces.-   Sanitary nozzles for feed, re-circulation, vent, pressure gauge, level switch, spare nozzles     on the top (manhole) and outlet at the bottom.-   Surface finish of less than 0.4 Ra inside and mat finish on outside surface.-   Sterile vent filter on the tank top. The distribution pump consisting of the following features-   SS316 L wetted parts.-   Mono-block/ vertical multistage, centrifugal type.-   Casing drain sanitary Valve. Distribution loop consisting of the following features-   SS316L, Seamless tubes, Electro-polished.-   Internal surfaces finish less than 0.4 Ra.-   Outside mirror polish-   Installed at a slope of 1:100 for complete drainability.-   Properly supported with SS304 contact parts. -   Dead legs of not more than 3 D.-   No hold up volume in case of shut down.-   Normal velocity of 2.8 m/s and during peak load velocity of min 1.2 m/s shall be maintained.-   All possible joints shall be orbital welded; remaining joints shall be sanitary tri-clamp     type with silicon gaskets. Apart from the above major items, the system have the following features :-   The complete storage and distribution system shall have provision of hot water sanitization -   Have the necessary pressure gauges viz. at pump outlet, loop return and compound     pressure gauge on tank top-   Conductivity controllers in loop supply.-   Differential pressure sensors & transmitters are provided in loop system. -   Temperature sensors in tank bottom & loop return. -   Level controller on tank for pump controlling and feed control.-   Sanitary UV Unit to control microbial load.-   Flow transmitters in loop return to monitor flow rate / velocity.-   Auto Dumping valve in loop supply for high conductivity. -   Auto Back Pressure Valve in loop return to regulate pressure and flow.-   The complete system shall be controlled by PLC based control panel with datalogging      facility.