Water Meters Dealers in Saki Vihar, Mumbai

Air or Gas samples up to 12kg/cm² pressure and temperature up to 75°C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure. AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings. Endee Model AMM-60 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for Moisture monitoring in commercial and industrial applications. Periodic monitoring of industrial Air systems results in a reduced maintenance cost & down time caused by condensate, the leading cause of corrosion in pneumatic systems. Handy and Light Weight Instant Direct dew point reading Digital Display Over all range - 60° C TO + 30°C Samples Pressure Upto 12 Kg/C2M Inbuilt Thin film water vapour sensor Optional RS 232 Computer Interface & Data Logger

We are the solution provider of Flow Measuring instuments based on various principals to meet the application requirements of process plants, briefly summarized below.

The company offers an ultimate variety of Water Flow Meter that operates on the velocity principle in which water enters the measuring chamber through a number of ports and drives the inner rotor. In this Water Flow Meter, the movement of water is transmitted via a gear train and magnetic coupling to the vacuum-sealed register for recording the reading.

• Brand Name: ULTRASONIC
• Material: Brass
• Display: DIGITAL

The AquaScat measures turbidity of potable water according to IEC 27027 using 90+° scattered light detection in a free-falling water stream (models WTM, WTM A, HT). This contactless design eliminates window foiling and minimizes servicing to a minimum. Calibration check is performed with a calibration unit that is either mounted to perform the check or that is already built in (depending on variant). APPLICATIONS Turbidity measurement in raw water Monitoring of flocculation and dosage of flocculants Filtration monitoring of filter performance and back-wash control Turbidity measurement in treated and final waters Turbidity monitoring of water in storage and distribution networks Turbidity measurement in process and waste waters True non-contact measurement in free-fall stream (models WTM, WTM A, HT) making it virtually maintenance free Dual beam measurement in optimized cell (model P) Re-calibration with secondary standard (fully automatic at model WTM A) Lowest stray light levels Convenient operation via touch screen Graphical display of trends and/or values Visualization of measured values over the previous month   SPECIFICATIONS Measuring principle:90° Scattered light according toISO 7027/EN27027 Light source: LED 880 nm Measuring span:0 .. 4‘000 FNU (WTM, WTM A, HT)0 .. 100 FNU (P) Measuring ranges: 8, freely programmable Resolution:0.001 FNU (WTM, WTM A, P); 0.1 FNU (HT) Sample temperature: 0 .. +40 °C Ambient temperature: –10 .. +50 °C Operation: Touchscreen Outputs:2 × 0/4 .. 20 mA, galv. isolated2 × Relays 250 VAC, 4A Inputs:1 × for optional flow meter2 × 0/4 .. 20 mA Digital interfaces: Ethernet, Modbus TCP, SD-card Optional: Profibus DP, Modbus RTU  

Ozone Meter For Ultra Pure Water, Thermometers, Portable Oxygen Monitor

We are offering water meters, flow meters. there are various brands of flow and water meters applicable in water flow and its measuring activities e.g. Bi-water meter, abb, elster, master meter, greiner, gibanola and others

Water Treatment Components, Water Treatment

Liquid Density & Concentration Meters, UHF Radio