Mehta Sanghvi & Company Marol, Mumbai, Maharashtra

Feature : Cost effective, Swift operation

Phase : Single Phase

Automatic Grade : Semi-Automatic

Welding helmets are headgear used when performing certain types of welding to protect the eyes, face and neck from flash burn, ultraviolet light, sparks, infrared light, and heat. Most commonly used with arc welding processes such as shielded metal arc welding, gas tungsten arc welding, and gas metal arc welding. Welding helmets are necessary to prevent arc eye, a painful condition where the cornea is inflamed. Welding helmets can also prevent retina burns, which can lead to a loss of vision. Both conditions are caused by unprotected exposure to the highly-concentrated ultraviolet and infrared rays emitted by the welding arc. Ultraviolet emissions from the welding arc can also damage uncovered skin, causing a sunburn-like condition in a relatively short period of welding. Most welding helmets include a window covered with a filter called a lens shade, through which the welder can see to work. In most helmets, the window may be made of tinted glass, tinted plastic, or a variable-density filter made from a pair of polarized lenses.

» Welding goggles provide a degree of eye protection while some forms of welding and cutting are being done. They are intended to protect the eyes not only from the heat and optical radiation produced by the welding, such as the intense ultraviolet light produced by an electric arc, but also from sparks or debris. Welspring offers superior quality welding goggles, with soft PVC Frame & meeting : * ANSI-Z87.1 * CE standards

Electrode holder is the insulated handle that clamps onto the electrode. The welder holds this device during welding to control the arc. Advantages include: » Excellent current transfer between electrode and holder » Two hole positions at 45° and 90° for welding in different positions » Electrode cable held in place by two Allen screws » All electrode holders are fully insulated to provide maximum safety

A wire brush is used for cleaning the welding surface, removal of slag, rust etc. The brush has stainless steel bristles. When working on stainless steel, a brush with stainless steel bristles and chipping hammer made of stainless steel must always be used.The wire brush is primarily an abrasive implement, used for cleaning rust and removing paint. It is also used to clean surfaces and to create a better conductive area for attaching electrical connections, such as those between car battery posts and their connectors, should they accumulate a build-up of grime and dirt. When cleaning stainless steel, it is advisable to use a stainless steel bristle wire brush, as a plain carbon steel brush can contaminate the stainless steel and cause rust spots to appear. Brass bristle brushes are used on softer surfaces or in potentially flammable environments where non-sparking tools are required. Wire brushes are also used to clean the teeth of large animals, such as crocodiles and pigs.they are also used widely in surface engineering to clean the castings to paint the castings. Powered wire brushes are commonly used to create brushed metal and to deburr edges.

WELDING AND HEATING : The shank can be used with any of the lightweight swagged nozzles enabling precise flame control and up to 8mm (516") welding capacity in steel. CUTTING : The newly designed lightweight cutting attachment uses the nozzle mix principle and is thus highly resistant to backfire and flashback.

A spark lighter is a tool used to ignite flammable gas appliances such as bunsen burners, welding torches, and gas grills. A spark lighter produces a spark having sufficient heat to ignite flammable gas vapor when a mechanical action causes a piece of flint to rub against a hard and rough metal surface.

Media : Air

Material : PVC

Pressure : Upto 400 BAR

Phase : Single Phase

Country of Origin : Made in India

Brand Name : Migatronic

Brand Name : Nitty-Gritty

Automatic Grade : Manual

Voltage : 220 V & 440 V

Application : Welding SS Tubes

Warranty : 1 Year

Cooling System : Liquid Cooling

Brand Name : Orbitalum Germany

These Rotary Ground Clamps are made of heavy duty brass & copper alloys for maximum conductivity. Rotary feature prevents cable twisting. Several design from 400 Amp-1500 Amp, Efficient grounding of rataing object, Easy connectivity to welding fixture, Outer face revolves with freeis wheel type action, One or two cable connectivity, Tension spring to ensure maximum contact between conducting surfaces.

The gouging Torch consists of the holder, a special cable attached to a cable lug and compressed air hose of 2 m length, The air supply can be regulated by means of a valve incorporated in the holder. Compressed air is discharged from two bores which are arranged in the rotary nozzle of the holder. The nozzle also serves for accommodating the welding carbon and is conveniently replaceable, Low price, low heat input, low metal removal cost, cuts all metals rapidly, easy to use, noiseless process, Striking of an arc between the metal work piece and carbon electrode, It is used for removal of weld defects, U-grooving, gouging out cracks, flushing out bolts and rivets, contouring.

GCE cutters are engineered from solid brass stamping with silver soldered joints and provide lightweight, well balanced, durable cutter giving reliability. With rear mounted valves and cutting lever and round handle. cutter employs the nozzle mix principle, in which the combustible gas mixing is confined to the cutting nozzle. This results in a cutter which is highly resistant to backfire and flashback. A wide range of accessories are available for this cutter, such as attachments for heating, gouging, sheet metal nozzles, circle attachments, etc., to give maximum possible versatility. GCE torches and nozzles conform to EN ISO 5172.

Electrodes with too much moisture may lead to cracking or porosity. Operational characteristics may be affected as well. This may cause excessive slag fluidity, a rough weld surface, deterioration of electrode arc performance, difficult slag removal, and cracking. Electrode Drying Ovens prove an indispensable asset to serve the purpose.All Electrode ovens by Welspring Universal are CE Approved. Ovens ranging from 5 kg – 300 kg holding capacity are available with auto cut-off facility.Analogue Thermoststs, Digital Temperature Controllers, Bench Oven & Flux oven models are fitted with mini-circuit breakers for safety, Each oven is tested and heated to rated temperature before being supplied.

Voltage : 48V, 70V, 110V & 220V

A flashback arrestor or flame arrestor is a device most commonly used in oxy-fuel welding and cutting to stop the flamefrom burning back up into the equipment and causing damage or explosions. Flashback arrestors typically use a combination of methods to stop flashback. This is the type that is typically found in most workshops, homes and portable oxy-fuel kits as they work just as effectively with any orientation, need very little maintenance, and are often small and light enough to be installed between the torch and hoses.

Country of Origin : Made in India

Our customers can buy from us a wide range of Cylinder Trolley (Carts). These cylinder trolley are used for carrying gas cylinders from one place to another without any hassle. The wheels of these trolleys are made using high strength polymer material that moves on its axle. These Cylinder Trolley (Carts) are known for features like long functional life, easy operation and smooth handling. Further, we make sure to deliver the ordered consignments to clients doorsteps within he stipulated period of time.

Type : CYLINDER CONNECTIONS AFNOR

Material : Stainless Steel, Brass

Speciality : USB Port for Program transfer, Large inbuilt memory for program storage, Standard Shape Library, Basic grid nesting on the CNC, Easy access control panel switches,

Max Cutting Speed : 500-1000 mm/min

Max Cutting Length : 3000/6300/12000 mm

Max Cutting Width : 1500/2500/3500 mm

CBT is used to prevent molten metal leakage from the backside of a full penetration weld. A full penetration weld requires something to block the gap from molten metal overflow. CBT helps achieve that, Ceramic Backing tape is a non-metallic ceramic material which is temporarily attached to the reverse side of a weld while helping to support a full penetration weld, It is made with several pieces of small ceramic tiles, glued to an adhesive tap, It is easy to apply, easy to clean up after the welding is completed, and can greatly improve welding quality and throughput, See next page for shapes and sizes available.

Warning: For use with non-combustible welding gases only. Misatu Gas Heaters are intended for use on 42V115V230V, 5060 Hz, single phase AC only. Since they are not insulated for outdoor use, the heaters must be protected from moisture and weather or climatic conditions that could cause electrical equipment to become a hazard. Use only with 3-wire grounded, electrical extension cord and socket.