Wire Machinery Dealers in Fort, Mumbai

• Capacity Round: 1" 25mm, 1.25" 36mm
• Hex: -5/8" -16mm, -1" -25mm
• Garden Size: 7" x 3.5" 175mm x 75mm , 8" x 4" 200mm x 100mm

We are a leading exporter of Bar Drawing Machines which can be availed at industry leading prices. These machines are available in various standard sizes and also they can be customized as per the client needs.

Universal swaging machine is designed for various operations such as swaging, wiring, flanging, jennying, necking or jogging and closing. Arranged for bench or floor mounting. Hand operated or motorized. The bottom spindle is adjustable in the horizontal plane, giving perfect alignment, with a lock to retain the adjustment. Pressure on the rolls is obtained by a hand wheel and screw on the top spindle. Each roll is recessed on the outside face, so that the nuts on the spindle with suitable speed reduction Gears, mounted on stand provided with motorization attachment.

Wire feeder Units are Portable Units having Twin. Roll Drive system designed to feed 0.8 to 2.4mm dia. welding wires to a hand operated MIG welding Torch. For ease in installation & operation as well as maintenance the Wire feeders are compartmentalized for different circuitery/ parts for different operations. Maintenance is made easy with Plug-in type printed circuit Boards (PCBmodules). A specially designed hub Assembly at the rear of the Wire feeder Units, accomodates a standard 12" dia. reel of welding wire. The wire feeder units are fully solid state & Thyristor controlled, has in addition latching facility, fine control & overload protection. MIG' Welding Torches available in various types & capacities in Air or water cooled types. Suitable for different jobs with different Collets, to hold welding Wires as per the capacities of Torch from 0.8 to 2.4mm dia.   The other required Accessories : Optional Extra Pressure regulater with Flow meter /CO2) CO2 Heater Inter Connections Sprayer Hard/Soft Wire Kits Water circulation Device-for Torches Spot Welding Attachment  

This is a Motorized model precision hollow tube forming machine equipped with 0.5 HP/single phase D.C. motor drive with speed control system. It is designed to give speeds from 0 to 100 RPM supplied with 250mm long tube winding roll (mandrel).  It is supplied with one set of drawing die & winding roll (mandrel) for the same. Hollow tube forming dies in various shapes & sizes are available. Our motorized model adjustable precision strip cutting machine is supplied complete with suitable 0.5 HP/ 220 volts/ single phase AC electric motor. The machine is having two parallel circular disc cutters having capacity to handle strips from 5 mm to 60 mm in width.

RFM series are 4 ~ 8 axes, high precise and reliable spring forming machine. RFM series offers all the same features and benefits of the CSM series with the addition of servo controlled wire rotation system. The rotary wire and quill rotation system offer versatile use of the machine at high speeds with feeding precision & no direction limit. Servo control rotary wire mechanism rotates around the wire during its spring forming, this increases the forming capability over the 3 axes machine and also reduces the setup time. Multiple optional servo spinners can reduce setup and tooling requirements. RFM offer similar function to the camless machine but at affordable cost. RFM is capable of processing flat wire, square wire, rhombic wire…etc. Optional EA 2nd hook forming station is for high speed production of extension spring.

- The welding operation on these machines is automatic and the settings are easy - Electrode spacing is adjusted by a lever set against a plate calibrated for wire diameter - Upsetting pressure is adjusted by means of a dial calibrated for wire diameter - Welding current is selected by a rotary switch - Wires to be joined should be cut straight, exactly at right angles and free from burrs - Wire ends are clamped by spring loaded clamping device which can be opened singly or together by foot pedals - Releasing the foot pedals leaves the wire clamped under adequate pressure - By the push of the button, welding cycle is initiated and completed automatically by built-in controls - Weld completed, the job is then de-clamped and annealed if necessary in the separate annealing electrodes Features: - Upset Travel - Movable platen travel on two parallel guides - Upset Pressure - Provided by a precision spring action on the movable platen - Electrodes - Special wear resistant copper alloy electrodes provided with precision 'V' grooves, permit rapid and accurate alignment of wires - Adjustment of welding current in 6 steps from 50% to 100% by rotary switch

This is a manually Operated Motorised Draw Bench Machine suitable for Gold wire and hollow pipe drawing operations. This is an excellent quality heavy duty five feet length motorized draw bench. This machine is ideal to draw soldered hollow tubes of copper, gold and silver. It is equipped with heavy duty chain and is fitted with single phase AC drive electricals for longer life and maintenance free operation. The machine uses standard diamond and carbide drawing dies. It is fitted with electrical control panel complete with speed controller and light indicators. It also fitted with both voltage and currrent drawing meter to show excess currrent draw in case of excessive load due to hard jobs to prevent damage to the machine. The machine is sturdy in built and easy to use. We also offer gold hollow tube making machine with welding attachment as well as precision strip cutting machine. Kindly ask for details.

Mainly used to reel radiation fins round the tubes.   Functions : 1. Controlling the segment pitch by change gears. It is very precise and stable. 2. Two tubes at a time, high efficiency can up to 1.6~1. 7m/min.(5mm segment pitch). 3. Easy to operate and stable quaiity.   Main Technical Parameters 1. Power supply: Triphase 380V, 50Hz. 2. Rated power: 750W. 3. Applicable tube diameter:

Swaging Machines, Roll Forming Machine, Industrial Grinder, Lathe Machine

A wide range of barbed wire making machines including automatic barbed wire making machine are also being offered to our client as a part of the wire machinery. These barbed wire making machines are designed in the close conformity to global standard and norms. They are very endurable and have long functional life with minimal expense on maintenance.

A wide range of barbed wire making machines including automatic barbed wire making machine are also being offered to our client as a part of the wire machinery. These barbed wire making machines are designed in the close conformity to global standard and norms. They are very endurable and have long functional life with minimal expense on maintenance.

We offer dual axis strip reeling machine. Main technical parameters 1. Power supply: triphase 380v, 50hz. 2. Rated power: 750w. 3. Applicable tube diameter:

Bull Block Heavy Duty Wire Drawing Machine, friction screw presses

• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Power: 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years

• Features: Incremental output ,Easy mounting ,High protection degree
• Resolution: 0,2mm/pulse
• Measurement stroke: 500mm,1000mm, 2000mm,3000mm,3500mm
• Output signal: A, B, Z or AA', BB', ZZ' Supply voltage 8-24 V DC, 5V DC or 5-30V DC
• Electrical connection: 2.5 meter cable (standard)
• Working temperature: -20°C ....+80°C

traverse motion unit, Winding Machine, Retaining Ring, weaving machine parts

We are offering Wire Stripping machine SP0201. Features： Multi-axis control system to control the worktable, movement pattern and parameters can be visual programmed Compare with the mechanical removing method, this innovation will result the minimum damage to inner metal wires Apply to strip the insulation protection of internal data signal wire of the mobile phones, notebook, camcorders, digital cameras, electronic dictionaries and other products of the microelectronics industry