Wire Machinery Dealers in Jogeshwari West, Mumbai

Hand Oprate rolling mill with heavy duty roll housing and bigger gears. It is provided with EXTRA gears to provide HIGHER ROLL OPENING i.e. it allows thicker plates to be rolled due to higher roll opening as a result of extra gears. Also this model is provided with TWO big size roll driving gears. Size :- “4 x 3” (101 mm x 57 mm) Size :- “5 x 3” (127 mm x 64 mm) Size :- “6 x 3” (152 mm x 76 mm)

We have two models of precision strip cutter. Our motorized model precision strip cutter is equipped with circular disc cutters and is adjustable to cut precise strips from 5mm upto 60mm as per your requirement.

The VM/6P, VM10P and VM/12P models are multi-pass straight-line drawing machines designed to process ferrous, non-ferrous and noble wires, which are available in two versions: variable speed, adjusted via potentiometer, or 2 fixed speeds (VM/6P2, 10P2 and 12P2) In both cases the movement is ensured by a three-phase motor with alternating current transmission through reducer in oil bath and is able to guarantee a drawing speed of up to 80 m/min. Advantages:   Transmission through reducer in oil bath Reel with electronic friction Very functional operator panel Optional electronic winding unit Strong, solid frame Very reliable Compliance with the required standards   Explanations:   The movement is ensured by a three-phase motor with alternating current transmission through reducer in oil bath and is able to guarantee a drawing speed of up to 110 m/min. The steel conical reel with hard chrome surface comes with a mechanical clutch with auto-leveling tempered discs for the constant tensioning of the wire and the smooth startup of the system; a closed-circuit cooling and lubrication device ensures the temperature dispersion of the die-holder group and the motorized conical reel during processing in order to delay wear and collect scrap materials. An easily accessible, highly functional control panel allows the operator to manage all operations in an immediate, streamlined fashion. Activations via foot pedal when the machine is both open and closed. The VM/6P, 10P and 12P drawings are equipped with optional electronic winding, and safety protection in accordance with internationally required standards.  

Requests for cleaning processes in the wire industry are continuously increasing and at the same time with increased quality requirements. Cleaning is the removal of contaminants present on the surface of the wire but not.chemically.linked.to.it. Cleaning is used for stainless steel, low and high carbon steel, aluminum alloy, copper wire to remove calcium and sodium parts lubricant residues after the dry drawing process, or lubricant oil from a wet drawing machine or forming process etc. Two types of technologies are usually proposed for this purpose: ultrasonic cleaning and electrolytic cleaning. Both of them have advantages and have to be chosen carefully depending on the type of wire and the type of products to be removed from the wire. Let’s compare briefly the two technologies. Ultrasonic cleaning is the use of high frequency sound waves. This results in cavitation, in which micro-size bubbles form, grow and implode due to alternating positive and negative pressure waves. Just prior to the bubble implosion, there is a tremendous amount of energy stored inside the bubble itself. The implosion event if it occurs near a hard surface changes the bubble into a jet which travels at a speed of approximately 400km/h towards the hard surface. Because of the inherent small size of the jet, ultrasonic cleaning has the ability to reach into small crevices.and.removed.entrapped.soils.very.effectively. The basic components of an ultrasonic cleaning system include some ultrasonic transducers, an electrical generator.and.a.tank.containing.the.cleaning.solution. The ultrasonic generator converts a standard electrical frequency of 50 or 60 Hz into the high frequencies required. The higher the frequency, the smaller the bubbles created during the cavitation will be. The transducers are constituted of PZT elements (Pb-Zr-Ti) which converts the electrical energy into mechanical vibrations by piezoelectric action. The transducers are installed inside a watertight box made in stainless steel immersed in the cleaning bath and located some centimeters below the wire field. A watertight cable connects the transducer holding box to the generator.The cleaning solutions used in the ultrasonic cleaning lines have to be chosen with care taking consideration of the type of wire and the application. Generally speaking for the majority of the applications in the wire industry, alkaline solutions are preferred to remove oily matter and phosphoric acid  based solutions are preferred to remove stearate soaps. The working temperature has a profound effect on ultrasonic cleaning effectiveness. In general higher temperatures will result in higher cavitation intensity and better cleaning. However, if the solution temperature too closely approaches the boiling point of the solution, the liquid will boil in the negative pressure areas of the sound waves, reducing or eliminating the cavitation effect. We usually work around 60°C (140°F) which offers an excellent compromise. In the electrolytic process, the wire passes through an electrolyte in a processing zone divided into different chambers. Electrodes are located in each chamber and adjacent electrodes are connected to opposite poles of a direct current supply source. Electrical current is constantly passing between the electrodes in the adjacent chambers through the electrolyte and the wire while it is traveling through the chambers in the processing zone. In this way, the wire is alternately polarized negatively and positively as it travel through the processing zones. The migration of ions of the electrolyte as a result of the polarization will allow some chemical reactions to take place quickly at the surface of the wire like hydrogen or oxygen bubbles formation. Those bubbles created at the surface of the wire will remove by a mechanical effect the dirt present on the wire. 

Wire Flattening Machine that we offer is energy efficient and has longer service life. The best thing about our Wire Flattening Machine is that it is portable. We are counted among the top Manufacturers, Exporters and Suppliers of Wire Flattening Machine. It is manufactured in compliance with the set industry standards and tested by our team of qualified quality controllers. Sturdy construction, noiseless operation and easy handling are some of the attributes that make our machine highly popular. Wire Flattening Machine that are highly efficient and reliable. Featuring robust designs, fine construction, portable size, low maintenance and energy efficiency these products showcase unmatched quality. All products are assured to be in compliance with the prescribed industry standards by our team of qualified quality controllers. Features: Sturdy construction Noiseless operation Easy handling

Knitted wire mesh machine of the same diameter. Aluminum & Fiber glass are widely used in doors & windows for insect & mosquito prevention. Application of Mesh & Specification of Wire Composition like Mild Steel, Galvanised, Stainless Steel, Monel, Inconel, Titanium, Phosphorus Bronze, Silver & many more along with Diameter varies from Industry to Industry.

  We are named among the prominent manufacturers and exporters of a wide gamut of Six Pass Wire Drawing Machine that has been priced very competitively and available as per the requirements of the clients. Furthermore, range that is manufactured at our end meet currents trends and followed its performance is appreciated by our clients largely. Specifications: Used for making thin gauge gold wire for chains and jewelry makers. Geared type floor model Fitted with special self-adjusting wire winding system Motorized coolant pump

• Automatic Grade: Semi-Automatic
• Condition: New
• Usage: Industrial
• Brand Name: Patco
• Production Capacity: 5
• Usage/Application: Card Wire Servicing
• Machine Type: Automatic, Semi-Automatic
• Frame Working width: 1600mm to 3000mm
• Connecting Load: 0.75 kw
• Features : Basic lengths on request,Suitable for Carding Cylinder wire and Doffer wire, feed roll and Re-Directing Roller Wire,Blow Room Beater Wire, Licker-in Wire interlocking and Grooved type,The machine has Grinding attachment for high spot of wire on mounted Ro

We are offering 8 pass wire drawing machine. model ak-wdm8 is a 8 pass drawing machine, designed for drawing gold and silver wire. The drawing process takes place through a series of draw plates with calibrated holes that decreasing by 0.1 mm in diameter the machine is composed by a sturdy metal frame that holds the motor, transmission, the cooling liquid tank, the unwinding reel, the motorized winding reel with adjustable clutch . This drawing machine comes with interchangeable steel reel winders for winding the drawn wire. The machine frame has a cast iron support, a metal base, and a heavy duty cast iron drawing roller. The winding reel has a plate-type clutch with ring gear and adjustable ring nut on the transmission that permits gradual start-up of the machine to prevent the wire from breaking. All of the transmission parts are mounted on bearings and have oil bath lubrication and a special filter applied to the scavenge pipe to permit recovery of metal filings. The machine also has safety guards and devices.

The Minex History of Wire Feeder is over 30 years, in the field of Steel & foundry industries. Over 400 installations have been commissioned during these years from the smallest for below 1 MT Ladle to extra-large one with Four Strand capability. Minex has installed over 90% of the Wire Feeder facilities in this country and many of them are repeat orders, project start-ups along with metallurgical support. Minex expertise in cored wire and injection systems enables us to offer complete turnkey solutions for cored wire technology implementation.

• max width: 3,5,10
• drive kw: 3.5

we are manufacturing pay off stand...They ensure durablity, sturdiness and ability to work in any condition.They work with AC drive.they are accessible with mechanical and electrical components

We are one of the largest suppliers, and exporters of variety of Low Tension XLPE CablesLow Voltage XLPE Cables and an established name in India and Globally. The wires and cables supplied by Aakash Power are most preferred with numerous installation throughout India, Africa, and UAE. Our Low Tension XLPE CablesLow Voltage XLPE Cables are approved by the international set of standards.

We are in the field of manufacturing quality industrial equipments includes wire making machines in India.

Wire Flattening Machine, Slitting Machine

Wire Pipe Testing Machine, Phased Array Ultrasonic Inspection

Six Pass Wire Drawing Machine for Jewellery, Jewellery Sand Blasting Machine

Ceramic, tubes, Ss Shaft Sleeves, Sleeves, Silicone Carbide

wire flattening mill

High Speed Double Twist Bunching Machine, Armour Cable Machine

Wire Take Up Machine, Wire Cable Driven Pay Off Machine

Ceramic, Ceramic Colours, glass colors

wire machinery, Wire Rope, Tinning Machines, Plastic Machines, Wholeseller

Piping Strip Cutting Machine, Hot Air Seam Sealing Machine

auto coiler, Winding Machines, Caterpillar, Capstan

Wire Nail Making Machine, Vacuum Blasting Machine, Aluminium Foil Machine

Beam Cutting Wire Saw Machine, Road Cutting Machine, Diamond Cutting Machine

Ceramic, Artificial Flowers, Dry Flowers, glass, Wooden Vase