Wire Making Machines Dealers in Andheri, Mumbai

• Motor: Single Phase
• Automatic Grade: Semi Automatic
• Power: 1-3kw
• Application: Wire Stitching
• Voltage: 230 V
• Type: Wire Stitching Machine
• Country of Origin: India
• Stitching Thickness: 0.1 mm to 3/4″
• Suitability: Centre and Side Stitching
• Minimum no. of pages: 2
• Maximum Thickness: 0.1 to 3/4″
• Stitch Speed: 110 Stitches/minute
• Wire: 20 S.W.G to 26 S.W.G
• Net Weight: 150 Kgs
• Gross Weight: 250 Kgs
• Machine Size: L 32″ W 28″ H 54″
• Packing Size: L 50″ W 30″ H 30″

We manufacture Hand Operated tube crimping machine or closing machine. Which is suitable for closing of 3 grams to 25o grams tube. Batch coding is also available in option. 

Packs a wide range of products in easily dispensable strips with economy and speed. With capacity up to 2400Strips per minute, its automatic trouble free operation meets the market standards.Capable of handle wide range for pharmaceuticals products namely, Coated and Uncoated tables, Hard gelatin capsules, Capsule shape Coated and Uncoated tablets, standard confectionary products etc.

Requests for cleaning processes in the wire industry are continuously increasing and at the same time with increased quality requirements. Cleaning is the removal of contaminants present on the surface of the wire but not.chemically.linked.to.it. Cleaning is used for stainless steel, low and high carbon steel, aluminum alloy, copper wire to remove calcium and sodium parts lubricant residues after the dry drawing process, or lubricant oil from a wet drawing machine or forming process etc. Two types of technologies are usually proposed for this purpose: ultrasonic cleaning and electrolytic cleaning. Both of them have advantages and have to be chosen carefully depending on the type of wire and the type of products to be removed from the wire. Let’s compare briefly the two technologies. Ultrasonic cleaning is the use of high frequency sound waves. This results in cavitation, in which micro-size bubbles form, grow and implode due to alternating positive and negative pressure waves. Just prior to the bubble implosion, there is a tremendous amount of energy stored inside the bubble itself. The implosion event if it occurs near a hard surface changes the bubble into a jet which travels at a speed of approximately 400km/h towards the hard surface. Because of the inherent small size of the jet, ultrasonic cleaning has the ability to reach into small crevices.and.removed.entrapped.soils.very.effectively. The basic components of an ultrasonic cleaning system include some ultrasonic transducers, an electrical generator.and.a.tank.containing.the.cleaning.solution. The ultrasonic generator converts a standard electrical frequency of 50 or 60 Hz into the high frequencies required. The higher the frequency, the smaller the bubbles created during the cavitation will be. The transducers are constituted of PZT elements (Pb-Zr-Ti) which converts the electrical energy into mechanical vibrations by piezoelectric action. The transducers are installed inside a watertight box made in stainless steel immersed in the cleaning bath and located some centimeters below the wire field. A watertight cable connects the transducer holding box to the generator.The cleaning solutions used in the ultrasonic cleaning lines have to be chosen with care taking consideration of the type of wire and the application. Generally speaking for the majority of the applications in the wire industry, alkaline solutions are preferred to remove oily matter and phosphoric acid  based solutions are preferred to remove stearate soaps. The working temperature has a profound effect on ultrasonic cleaning effectiveness. In general higher temperatures will result in higher cavitation intensity and better cleaning. However, if the solution temperature too closely approaches the boiling point of the solution, the liquid will boil in the negative pressure areas of the sound waves, reducing or eliminating the cavitation effect. We usually work around 60°C (140°F) which offers an excellent compromise. In the electrolytic process, the wire passes through an electrolyte in a processing zone divided into different chambers. Electrodes are located in each chamber and adjacent electrodes are connected to opposite poles of a direct current supply source. Electrical current is constantly passing between the electrodes in the adjacent chambers through the electrolyte and the wire while it is traveling through the chambers in the processing zone. In this way, the wire is alternately polarized negatively and positively as it travel through the processing zones. The migration of ions of the electrolyte as a result of the polarization will allow some chemical reactions to take place quickly at the surface of the wire like hydrogen or oxygen bubbles formation. Those bubbles created at the surface of the wire will remove by a mechanical effect the dirt present on the wire. 

• Power: 3 HP
• Capacity: 1.5 Ton - 2 Ton
• Automation Grade: Semi-Automatic
• Screw RPM: 30 - 80 mm
• Phase: Three Phase

• diameter ranging: .6mm to 0.05 mm dia.

Mesh made from knitting of wires into interlocking loops. Such interlocking or knitting results in strong, flexible, resilient, vibration reduction, sound attenuation, heat and corrosion resistance properties.Flat wires are also used where a larger surface area is required. Made from wire of Galvanised Steel, Stainless Steel, Copper, Tinned Copper, Brass, Nickel, & many other metals.Wire diameter ranging from dia 0.6mm to 0.05 mm dia.

Our fully Automatic Bar Bending Machine are operated through manual button as well as automatic button and deliver stable performance with optimum safety. Further, our machines enable the users to control the path and return it back automatically.

Packs a wide range of products in easily dispensable strips with economy and speed. With capacity up to 2400 strips per minute, its automatic trouble free operation meets exacting marketing market standards. Capable of handle wide range for pharmaceuticals products namely, coated and uncoated Tablets, Hard gelatin capsules, Capsule shape coated and uncoated tablets, standard confectionary products etc. Special Features: GMP construction. Models ranging from 2 tracks to 10 tracks, 40 mm to 300 mm sealing width. Take off conveyors of different sizes to convey strips to inspection and packing tablets.  Customised to different product sizes and shapes. Machine suitable for different heat sealable packing laminates. Temperature control by thermostat or digital temp. indicator and control panel manpower for operation. Electrical motor suitable for 415 V/ 380 V/ 3 PH/ 50 CS/ AC Supply.

• Material: Mild Steel
• Automatic Grade: Manual
• Voltage: 220V
• Color: Black
• Country of Origin: India

The Ajax Electric Pencil has been perfected by years of constant research and is one of the finest instruments of its kind. The Ajax Electric Pencil is ideal for use in various industries, which require rapid accurate and indelible marking on components. It will virtually mark all metals that are conductive, irrespective of them being hard of soft. Since the etching is by simple writing, components need not be stamped for such markings as inspection codes, sizes or part numbers. The distinct advantage of the Ajax Electric Pencil is that one can etch whenever one needs, a character, sign or symbol without the use of special tooling, punches or die stamps. The Ajax Electric Pencil writes with a degree of smoothness that allows the metal to be evenly etched over the entire writing area. Operated from a separate transformer unit with variable settings, etchings of depth from light to heavy are possible. Ajax Transformers are manufactured according to Factory Regulations and are engineered to be as light as possible. The power input voltage is 200/240 volts; AC 50Hz. Current consumption is negligible. The transformer absorbs 4 to 6 watts continuously and about 20 to 40 watts when the pencil is in operation There is no possibility of electric shock and the actual arc is mild so as not affect the eyes. Ajax Needles are made of special heat - resistant alloy and retain their sharpness for a long period. When the point becomes blunt, it may be readily sharpened with a fine abrasive wheel. For best results, use only Ajax Needles with the electric pencil.   BATTERY OPERATION The Ajax Electric Pencil may be operated from an accumulator or a battery, not exceeding 8 volts. For battery operation, the electric pencil is supplied without a transformer or battery.   SYSTEM FEATURES The Ajax Pencil is crafted from quality material, and is specially protected to ensure high-grade performance. The Ajax Pencil is designed to be used as a penholder and is well balanced for comfortable operation. The Ajax Pencil is shockproof and can be easily used even by an unskilled operator. The Ajax Pencil writes evenly and smoothly, giving a clear, black impression regardless of the hardness or softness of the metal. A variable current output provides for six different degrees of writing enable efficient etching on any metal. Every Ajax Pencil is carefully adjusted to close tolerances, and factory sealed – your GUARANTEE for reliability.   CAUTION DO NOT connect the transformer to a Direct Current circuit. When using a battery, do not use more than 8 volts. When changing the needle, hold spring gently against magnet rod. The Ajax Pencil is a precision instrument and must be treated with care. DO NOT bend magnet rod, spring or break seal.   STANDARD ACCESSORIES Transformer 200/240 volts AC 50 Hz. Ajax Electric Pencil with connecting lead. Contact Plate with lead. Ajax heat-resistant alloy needles (3UNITS). AJAX ELECTRIC PENCIL (For battery operation) Ajax Electric Pencil with connecting lead. Contact Plate with connecting lead. Ajax heat-resistant alloy needles (3UNITS). No battery supplied. PRODUCT DIMENSIONS Net Weight of Pencil - 150gms. Gross Weight of Pencil - 220gms. Net Weight of Complete Unit - 2.50kg. Gross Weight o Complete Unit - 3.50kG

Saminder Singh Saan the son of Respected Mr Joginder Singh Saan is B.E.(HONS) in Mechanical Engg from London ,UK following the legacy of the family adding a new dimension to the organisation. Taking care of International Business and introducing the new concept of Machine Designing and manufacturing as per the European Standards. This machine produces cotton bail wire knots using striaghtened cut wires as raw material.

The copper wire from the outlet is fed into an continuous resistance inline annealer available from 40 KW to 350 KW annealing power and 800 Amp. to 7000 Amps current (max)

This machine is ideally suited for rewinders. It can wind universal motor armatures (mixer,portable tools,pumps etc.) and ceiling fan stators. The armature winding head is adjustable so is the head for ceiling fan. The machine can handle wire gauges from 22 swg to 38 swg. The number of turns are controlled with an electronic preset counter. The mode selector switch allow you to select the armatureceiling fan mode. This controls the direction of winding for ceiling fan automatically. The main drive is PMDC motor and the winding speed is variable from 0 to 1500 RPM, The machine is easy to use and due to its rugged designed virtually maintenance free.

For Making Office or Spring Files We have following Machines File Master Machine Rotary Office or Spring File Creasing Machine Automatic Office or Spring File Creasing Machine

Specifications : ∗ Machine for automatic Cutting, Stripping & Crimping of PVC insulated wires. ∗ Wire size 0.3 to 1.5 mm2∗ Wire length Min 60mm to max 10 mtrs.∗ Machine for both side Stripping but single side Crimping∗ Machine suitable for variety of applicators, such as Sai Paradise,     Mecal, Tyco, JinLun etc.∗ Unique Touch Panel Control.∗ Optional “Crimp Quality Monitor” available at extra cost. Production Speed Upto 2500 wires per hour For 60 – 2000 mm length Technical Details ∗ Size: Base: 850mm X 850mm Height: 1500mm∗ Requires single phase Electric Supply (Stabilizer essential)∗ Compressed air required at 5 bar, 100 lpm (1hp compressor)∗ Strong & Sturdy machine.

• Country of Origin: Made in India
• Machine Type: tube crimping
• Automation Grade: Manual
• Model Name/Number: Pharmachem Aluminum Tube Crimping
• Frequency : 50 Hz
• Power Source: Electric
• Machine Structure: Horizontal
• Brand Name: Pharmachem

• Approx. dimension (without stand): 300 x 400 x 600 (mm)
• Air require: 80 PCS / 6 kg bar
• Power require: Not required
• Number of Crimping Head: 1 No
• Number of Pneumatic Cylinders: 2 No.
• Operator Require: 1 person
• Production: Up to 30 BPM(As Per Operators Efficiency)

100% pneumatically operated machine. (completely flameproof) Special design, heavy duty pneumatic cylinder. Very easy operation. Automatic pressure adjust of pneumatic operation as per require. Replacing crimping collet is a very easy job. Height adjustable by hand wheel. S.S. covering of main machine body. FRL provided with the machine. Machine can be mounted on top of conveyor by S.S. platform or with the powder coated stand. Two modes available: a) Foot operating. b) 'Continue' Operating.

• No. Of Cylinders: 1
• Air Required: 2 - 3 CFM @ 6 - 7 Kg Bar
• Production Capacity: Upto 50 BPM (Depending On Operator's Efficiency)
• Approx. Dim. (mm): 600 L X 300 W X 700 H
• Approx. Weight (Kgs): 110
• Manpower Required: 1
• Contact Parts MOC: SS 304/EN/Nylon

We are offering swastik’s semi auto single head perfume collar fitting machine. Pick up the filled bottles by swastik's filling machine from swastik's packing conveyor. Place the bottle between the 'v' (for round & square) or individual two side support type (for any other shape) guide provided on the platform and press the footswitch. The collaring head would move down and swiftly push the collar and automatically go back to its home position. Remove the bottle place it on the packing conveyor. Take the next bottle and repeat the process. The head keeps oscillating between up & down movement continuously without any operator intervention. (in manual mode the cycle will operate only once) machine features : 1) completely air operated 2) flameproof 3) two operation modes (auto & manual) 4) height adjustment with counter 5) speed control for cylinders 6) changeover time of less than 5 mins 7) easily replaceable holder 8) two type of guides provided

Packs a wide range of products in easily dispensable strips with economy and speed. With capacity up to 2400Strips per minute, its automatic trouble free operation meets the market standards. Capable of handle wide range for pharmaceuticals products namely, Coated and Uncoated tables, Hard gelatin capsules, Capsule shape Coated and Uncoated tablets, standard confectionary products etc.