Biomass Dryer Dealers

• Material: MS
• Finishing: Polished
• Color: Blue
• Condition: New
• Power: 5kW

The drier system is conventional pneumatic flash dryer. The hot gas carries the materials pneumatically and drying would be achieved by intimate mixing of hot gas with the wet material as they travel together in the drier columns. The drying bin shall be filled with wet biomass to be dried from the top of the bin. The Exhaust gas from the Gas Engine shall be mixed with atmospheric air from the blower to bring its temperature down to 120 – 130 Deg C. The hot gas shall enter the drying bin through the inlet expansion duct, and pass through the biomass filled in the drying bin and exit the bin trough the perforated front and from the top of the drying bin. In the process, the biomass being in intimate contact with hot gas shall be dried. After the end of the drying cycle, the drying bin would be emptied by simply opening the perforated front plate of the bin, which rests on hinges. The two bin would be operated alternately, so that one bin is working as a dryer,while the other is discharged of dried wood & loaded with fresh wood. Each batch would generate 350 -400kgs of dry biomass with 15% moisture content. The batch cycle time would be 4 hours. The dryer would be provided with ventilation hoods to exhaust the humid air into the atmosphere via a 6 m high stack, located outside the plant building.  

• Application: Dry Paddy Straw to Optimum Moisture Level
• Production Capacity: 5 TPH
• Input Raw-Material Type: Paddy Straw
• Input Raw-Material Size: Granulated
• Input Raw-Material Moisture Up-to: 25%
• No. of Cyclone: 2, Double augers. High efficiency. Air proof technology
• Cyclone Height: 10 Mtrs
• Cyclone Thickness: 5 mm
• No. of ID Fans: 2, Well balanced fan that run in high Temperature and high moisture environment.
• No. of Rotary Air Lock: Reliable design of anti-Block and airproof.
• Furnace Frame: Square tube
• Grate bed Area: Grill Grates
• Electrical VFD: Schneider
• Electric Motors: Siemens/Crompton/ABB Bearing:SKF/NBC/NTN
• Power Per KW: 40 KW

• Moisture Evaporation Capacity: 450 Kg. /Hr.
• Output: 1500 Kg. /Hr.
• Maximum Input Moisture: 35%
• Outlet Moisture: 15%
• Centrifugal Fan Motor: 15 Hp
• Vibrating Screen: 2 Hp
• Screw Conveyor Motor: 2 Hp

We are offering rotary drum dryer for wood materials. Introduction rotary drum dryer is one of the traditional wood drying equipment which is of reliable operation, high flexibility and large processing capacity. It is widely used in metallurgy, chemical, and other large scale industries. Rotary drum dryer characteristics 1. Large handling capacity and low energy cost & investment. 2. High drying speed. The dryer is of good thermostability, using high temperature and hot air to dry the material quickly. 3. High overloading capacity. Even though there is a little increase in the handing capacity, it does not need to replace equipment. 4. The special design of gear wheel structure can greatly reduce the horizontal force produced by the oblique rotary drum.

• Brand Name: PIYALI GROUP
• Material: SS
• Finishing: Polished
• Condition: New
• Power Source: Hydraulic
• Automatic: Automatic
• Usage: Steel Industry
• Certification: ISO 9001:2008
• Packaging Type: Wooden box
• Type: Biomass Dryer
• Warranty: 2 Year
• Country of Origin: India

• Techinical Specification:  
•  : MOISTURE EVAPORATION CAPACITY
• :: 45Okg./hr.
• OUTPUT: :
• 1500 kg./hr.: MAXIMUM INPUT MOISTURE
• :: 35.00%
• OUTLET MOISTURE: :
• 15.00%: CENTRIFUGAL FAN MOTOR
• :: 15 HP
• VIBRATING SCREEN: :
• 2 HP: SCREW CONVEYOR MOTOR
• :: 2 HP

• Type: Biomass Rotary Drum Dryer
• Application: Drying
• Voltage: 220V
• Condition: New
• Warranty: 1year
• Automatic Grade: Automatic
• Driven Type: Electric
• Quality: Excellent

Do you want to buy biomass rotary drum dryer for your industry? Here at Ask Engineering Works, you will get excellent machines at an affordable price range. We manufacture machines in our industry by sourcing materials from reliable and trusted sources. Experienced and skilled experts and engineers look after the manufacturing process. They keep a check that there are no faults in the machines that we manufacture, supply, and export to different countries across the world. How Our Biomass Rotary Drum Dryer Works? Our rotary dryer mainly consists of a rotating body, lifting plate, supporting device, transmission device, and a sealing ring. The dryer is cylindrical and it is slightly inclined from the horizontal direction. The materials are then added from a high end. The materials and the high-temperature sources flow parallel or counter flow into the cylinder. When the cylinder rotates, the materials drop down and the flow is increased. This increases the drying rate and also promotes material advancement. Finally, the dried products leave the dryer from the lower end. Features And Characteristics The machines that you get from Ask Engineering Works have amazing features. These include. • A huge capacity for drying • Steady and continuous operation. • Depending on the material characteristics, it chooses the inner structure to meet the requirements of drying the materials. • It prevents the materials from sticking on the wall. It is an ideal system for drying the materials with high moisture and viscosity. Applications Our machines are widely used in mining, chemical, agriculture, metallurgy, fertilizer, feed, and other such industries. Such as coal, ore, slag, metal powder, kaolin, diatomaceous earth, starch residue, dregs, soy sauce residue, etc. Your search for the best supplier of biomass rotary drum dryers in India is now over. We have amazing products at an affordable price. Order our products for your industries for different purposes and get them delivered on time.

It is a product which is used for drying any type of Biomass Dryer material, such as, wood, wood-waste, corn wastes, coconut shell, rice husks, agriculture residue, etc. The purpose of this dryer is to reduce moisture content of the biomass material to a minimum level, so as enable the cleaner, efficient and controlled combustion of the biomass with high calorific value, when fed into the Gasifier for the gasification process.

In the Flash Dryer system, Input Biomass (with Higher Moisture) feed in a screw Conveyor mix with hot air. Hot Air which is generated from furnace passes with wet Biomass in duct line. Due to ID Blower developed negative pressure in full system up to duct line.Moisture liberated from biomass due to more than 100.C Temperature inside system. Due to maximum Contact time and surface area moisture evaporate and separated threw blower discharge. At the bottom of Cyclone dry biomass collected and discharged threw RAV- rotary air lock valve. Moisture (Steam) and flue gases pass to ID fan to Bag house or Chimney. Application : Flash Dryer is used for Drying Biomass like sawdust, Bamboo dust, sugarcane bagasse etc. Output Capacity of Flash Dryer : Output Production Capacity - 1500 Kg/Hr. ( If input Moisture % Max. 30%) Input Moisture Percentage - 30% Output Moisture Percentage - 10% Water Evaporation Capacity - 400 Kg/Hr. Output Capacity : If moisture percentage is more then 30% Output prouction capacity will be propotionally less. Output drying capacity is depend on input material moisture % System Specification : Type of Dryer - Flash Type Dry Threw - Hot air System Pressure - Negative/suction Fuel in Furness - Solid coal ( Briquettes/Fire Wood) Technical Specification : Blower - 25 HP Rotary Air Lock Valve - 1 HP Screw Conveyor - 3 HP Atomization for Operating : Feeding conveyor speed is operating as per cyclone outlet set point temperature. Servo control valve is operated as per desire temperature for system. Land Area & Size ( Approx) : Length - 20 Feet Width - 15 Feet Height - 20 Feet Silent Futures of Radhe Engineering Co. - Flash dryer : Maximum travel length with Hot air. Completely atomized feeding threw VFD drive as per operating parameters High capacity ID Blower Servo control valve to mix blend fresh air to desire input temperature from furnace Dust collecting system to as for control dust pollution. Temperature sensor at all required location to support atomization as a set point.

• Weight: 50Kg
• Voltage: 110V
• Condition: New
• Material: MS
• Warranty: 1 Year
• Automatic: Automatic
• Heating Media: Electric
• Brand Name: Phoenix

• size: 30 x 15 or 25 x 25
• Moisture Evaporation Capacity: 450 Kg. /Hr.
• Output: 1500 Kg. /Hr.
• Maximum Input Moisture: 35%
• Outlet Moisture: 15%
• Centrifugal Fan Motor: 15 Hp
• Vibrating Screen: 2 Hp
• Screw Conveyor Motor: 2 Hp

Turbo Dryer is also known as Column Turbo Dryer (CTD) which is utilized for the Drying Purpose for all such Raw Material which is having high moisture content up to 30-35% such as fibrous material such as Bagasse, Jute, Coir Pitch, EFB Palm Waste etc from which moisture evaporates at the acceptable limit of 12%.

We are a well known entity that is engaged in offering a vast array of Biomass Dryer. Designed perfectly in accordance with the set industry norms by making use of latest technology and supreme quality material, offered biomass dryer is hugely cherished by our customers for its excellent performance and sturdy construction. Further, this biomass dryer is checked on several parameters by our quality checkers to ensure its flawlessness.   Features: Robust design High performance Corrosion resistance

We make available fine quality Biomass Rotary Drum Dryer which has the robust structure. Our well-structured warehouse is properly maintained and installed with diverse amenities required for the safe storage of the products. Moreover, we keep on updating the unit for enhanced safety. Our experts ensure that payments are made on time and for that, we have online payment processing system to evade security issues. We have well maintained payment logs available for the convenience of our customers.

Agro Waste Dryer or Saw Dust Dryer / Bio Mass Dryer for pallet manufacturing process. After drying from our supplied biomass dryer moisture level below 20%. We are using best technology in which biomass dry with using optimize energy. We are in business of manufacturing of Agro Waste Dryer or Saw Dust Dryer / Bio Mass Dryer.If you have require Agro Waste Dryer or Saw Dust Dryer / Bio Mass Dryer for pellet manufacturing process for that please specify following things. 1. The capacity of Agro Waste Dryer or Saw Dust Dryer / Bio Mass Dryer dryer in Ton per Hour. 2. Which heat source / fuel you want to use? - Hot air / diesel / Thermic oil3. Detail technical specification of bio mass. A. Which agriculture waste product you want to use.B. Name any forest waste if you want.C. Size of Agro Waste Dryer or Saw Dust Dryer / Bio Mass Dryer in length and thickness in millimeter.D. Moisture in Agro Waste Dryer or Saw Dust Dryer / Bio Mass Dryer before drying and after drying.4. Other specified requirement if any at your end.

• Material: Mild Steel
• Automation Grade: Automatic
• Capacity: 1000-1500 kg/hr
• Country of Origin: Made in India
• Automatic Grade: Automatic
• Design: Standard

• Color: Black, Blue, Brown
• Power: 12-15kw, 15-18kw, 18-21kw
• Warranty: 1-5 Years
• Features: Longer Life, Good Quality, High Strength
• Use: Industial

• Output Production Capacity: 1500 Kg/Hr.
• Input Moisture Percentage: 30%
• Output Moisture Percentage: 10%
• Water Evaporation Capacity: 400 Kg/Hr.

In the Flash Dryer system, Input Biomass (with Higher Moisture) feed in a screw Conveyor mix with hot air. Hot Air which is generated from furnace passes with wet Biomass in duct line. Due to ID Blower developed negative pressure in full system up to duct line. Moisture liberated from biomass due to more than 100.C Temperature inside system. Due to maximum Contact time and surface area moisture evaporate and separated threw blower discharge. At the bottom of Cyclone dry biomass collected and discharged threw RAV- rotary air lock valve. Moisture (Steam) and flue gases pass to ID fan to Bag house or Chimney.

Designed with perfection, our Biomass Grain Dryer is integrated with advanced technology to meet the demands of the clients. Biomass Grain Dryer can be availed at reasonable price.

• Moisture Evaporation Capacity: 450 Kg. /Hr.
• Output: 1500 Kg. /Hr.
• Maximum Input Moisture: 35%
• Outlet Moisture: 15%
• Centrifugal Fan Motor: 15 Hp
• Vibrating Screen: 2 Hp
• Screw Conveyor Motor: 2 Hp

Turbo Dryer is also known as Column Turbo Dryer (CTD) which is utilized for the Drying Purpose for all such Raw Material which is having high moisture content up to 30-35% such as fibrous material such as Bagasse, Jute, Coir Pitch, EFB Palm Waste etc from which moisture evaporates at the acceptable limit of 12%. GENERAL DESCRIPTION The system consists of screw conveyor, vibrating screen, feeding hopper vane guide, conveying line including insulated drying column and conveying line through which wet or moist material is conveyed with hot air.  A powerful low pressure open wheel centrifugal fan assures significant resilience time for removal of excess moistures. Material is conveyed to cyclone and discharged through air tap duct. WORKS Hot air temperature is kept according to the requirement from moisture of material. Your flue gas temp of 150 deg cent will not serve the purpose as material, even at 30-35 % moisture level, will require 300-350 deg centigrade. Also, for 50 % material, the temp may be used at about 500-550 deg cent. Flow rate will be around 10,000 cmh. The dryer is flexible at the joints, i.e., at the bends. So, you can take a 90 deg turn at any of the joints. Hence, including HAG, the dryer size could be 30 x 15 or 25 x 25 ft. with a height of about 29 ft. We recommend to use Hot Air Generator as Source for evaporating moisture from Biomass so that the Briquettes manufactured from such Biomass will be proved to be good Biofuel in Boilers  We use a SS chicken mesh at the outlet of furnace, which is sufficient to arrest any leftover spark in the flue gas, after it has travelled through 2-3 ups & downs in the Furnace. With 50 % input and 14 % output of Bagasse, CTD dryer will give an output of approx. 1500 Kgs/hr.