Plastic Injection Machines Dealers

We are a leading importer and supplier of fine quality used plastic injection molding machines. The used plastic injection molding machines are highly effective and at the same time, very cost effective as well. The used plastic injection molding machines manufactured by us cater to many industries and diverse industrial applications.

DESCRIPTION/MODEL NATMEK 25 Injection A B Screw diameter mm 22 25 Screw L/D ratio - 17:07 15:05 Injection volume cm³ 30 38 Shot weight g 27 34 oz 0.9 1.2 Max injection rate cm³/s 33.8 43.28 Plasticizing rate kg/h 9.36 11.88 Injection pressure mpa 185 143 Screw speed rpm 0~165 Clamping Clamping force kn 250 Opening stroke mm 150 Platen size mmxmm 320x320 Space between tie bars mmxmm 200x200 Mold thickness mm 80-220 Ejector stroke mm 40 Ejector force kn 13 General data Max oil perssure mpa 14 Pump motor kw 2.2 Heating power kw 2.5 Heating zones - 2+nozzle Dry cycle time sec 1.1 Oil tank capacity L 85 Machine dimension mxmxm 2.62x0.62x1.21 Machine weight kg 1000

We offer a wide range of Fully Automatic Horizontal Plastic Injection Molding Machine. Fully Automatic Horizontal Plastic Injection Molding Machine comes with a fixed van pump, variable displacement pump, servo system, full PLC controller, hydro motor, and an ejector. Additionally, Fully Automatic Horizontal Plastic Injection Molding Machine is equipped with auto load hopper and a dryer.   Standard Features : PLC system ( colour display ) AC three phase induction motor Servo Motor AC drive Servo Drive Hydraulic Fixed Van pump Variable Displacement Pump Servo Gear Pump High chrome platted step less tie bar Larger opening stroke mould capacity and tie bar distance to accommodate large moulds Graded casting  toggle, brackets and links with harden pin and bush Multi stage injection with speed & pressure Multi stage mould opening and closing speed & pressure Gas nitride steels screw barrel and cavity Part dropping sensor for single part Hydraulic & pneumatic core pulling device S.S. hopper with magnet grill Slide mechanism for hopper High efficiency and low power rate ceramic heater Centralize lubrication systems PID temperature controller for heaters Insulated heaters Screw back pressure control valve Cold start protection Air valve Water manifold 4 inout Hydraulic ejector Hydro motor for opening mold thread MCB control each heating zone Heater disconnection alarm Electrical and hydraulic (dump valve) interlock safety gate Ampere meter for heater Energy meter Oil temperature indicator Oil cooler ( water cooling type ) Injection Unit : Multi stage injection with variable speed & pressure Liner transducer to control programmable injection position Programmable holding pressure profile Programmable multi stage refilling Single injection cylinder  unit Automatic purging Gas nitrated hardened screw and barrel Heater disconnection alarm Cold start screw prevention Pre-suck back function PID temperature control Sliding mechanism for hopper Screw back pressure control valve Clamping Unit : Case hardened pin & bush High tensile & hard chrome plated tie rods of larger diameters. Fully automatic centralization lubrication unit Multi  stage mould opening and closing with variable speed & pressure Liner transducer to control programmable clamping system Five point toggle locking system Graded casting, Platen &  toggle  Motorized mould height adjustment for quick mould change Linear transducer for control programmable ejector position with variable speed & pressure Hydraulic ejector with multiple ejecting, oscillatory ejecting & holding

• Style: Horizontal
• Voltage: 220V, 380V, 440V
• Shaping Mode: Plastic Injection
• Warranty: 1 Year
• Operation Mode: Automatic
• Power: 1-3kw

ALL RANGE OF JAPANESE USED INJECTION MOULDING MACHINES AVAILABLE FOR SALE. FOR FURTHER INFORMATION PLEASE CONTACT US OR VISIT US:- www.simranmachines.com PRABHJOT SINGH +918527885219

• Country of Origin: India
• Plastic Type: PP
• Style: Vertical
• Certification: ISO 9001:2008, CE Certified
• Condition: New
• Warranty: 1 Year
• Operation Mode: Fully Automatic
• Brand Name: ALLPLAST
• Power: Three phase

Our range start from 15 ton to 250 ton with shot weight from 30 gram to 3000 gram. 

• Country of Origin: India
• Plastic Type: PP, PE, PET, ABS
• Style: Horizontal
• Condition: New
• Shaping Mode: Plastic Injection
• Warranty: 1 Year
• Plastic Modling Type: Mold Components
• Clamping Force: 500-1000kn, 1100-1500kn, 1600-2000kn, 2100-2500kn
• Operation Mode: Fully Automatic
• Type: Automatic
• Brand Name: SMT
• Voltage: 440
• Power: Depend upon capacity of machine
• Automation Grade: Semi-Automatic
• Machine Type: Injection Blow Molding
• Frequency: 50 Hz
• Usage/ Application: Industrial
• Phase: Single or Three Phase

We are the leading Manufacturers of Antivibration Machine Mounts & Rubber Molded Products and Parts

• Type: Plastic Injection Molding
• Weight: 100-1000kg
• Color: Brown, Grey, Light White
• Voltage: 440V
• Condition: New, Used
• Application: Molding Machine
• Automatic Grade: Automatic, Manual, Semi Automatic
• Driven Type: Electric
• Warrenty: 1 Year, 2 Years

• Voltage: 220V
• Condition: New
• Warranty: 1 Year
• Finishing: Polished
• Usage: Industrial
• Operation Mode: Fully Automatic

• Weight: 100-1000kg
• Voltage: 220V
• Condition: New
• Material: Metal
• Plastic Type: PP, PE, PA, ABS, PET, PE,ABS,HDPE, LDPE, PVC, UPVC, Nylon, PU
• Machine Structure: Horizontal
• Operation Mode: Automatic, Semi-Automatic
• Capacity ( ton per day): 1 to 50, 50 to 100, 100 to 150, 150 to 200, 200 to 250
• Clamping Way: Hydraulic, Mechanical, Hydraulic & Mechanical Composite
• Structure: Horizontal, Horizontal & Vertical

• capacity: 800 ton

Used machinery may be the right alternative for a small producer looking to expand capacity, a startup machine shop needing to stretch its budget, or even a manufacturing giant replacing defunct machinery. One of the bonuses of buying used machinery is that most items found on the second hand market are in good condition. Require Used 800 ton capacity plastic injection moulding machine

Obtain quality-grade Plastic Injection Moulding Machine from us at reasonable prices, as we are reckoned among renowned suppliers of the product. We are a reliable name in this arena and thus make sure that the services offered by us for payment are easy to use as well as offer hassle-free and instant transactions.

• Brand Name: Demag

We have used plastic injection moulding machine from 7 ton to 850ton in stock,we have 120machines , -variable frequency drives (vfd) on plastic injection molding machine, for power saving 30-40% -hybrid servo drives systems on plastic injection molding machines, for power saving 50-80%,(servo drive is made in rexroth &baumuler germany) -plc(microprocessor controller) for plastic injection molding machine, -proportional pressure & flow control valves, -old controler for japanese injectionmoulding machines , also pl. Find stock list. mechatronics machinery&tools(india) d-30&31, ambey garden, libas pur, samaipur ext., new delhi-110042 skype- mmti19.

• Type: Injection Moulding Machines, Plastic Injection Moulding Machines
• Plastic Type: ABS, PE, PET, PP, Universal
• Style: Horizontal
• Color: Customer Choice
• Processing Type: Cnc Machine
• Voltage: 220V, 440V
• Condition: Used, Retrofitted
• Power: As Per Customer Application
• Shaping Mode: Plastic Injection
• Warranty: 1 Year
• Clamping Force: As Per Customer Application
• Country of Origin: India
• Operation Mode: Automatic, Fully Automatic
• Brand Name: Windsor, Indomax, Supermax, AKAR

• Brand Name: Windsor
• Color: Creamy

I want to sell my used plastic injection moulding machine windsor make 300 tonn with full running condition 

We are one of the eminent Manufacturers and Suppliers of SOS Innovita Plastic Injection Moulding Machine. It is a fully automatic mobile type machine with whole plant assembly on single chassis. We offer the plant in varied specifications. The plant is easy to erect and maintain, as there is no requirement for foundations. Buyers can order SOS Innovita Plastic Injection Moulding Machine from us anytime of the year.

• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Warranty: 1 Year
• Clamping Force: 1100-1500kn, 1600-2000kn, 2100-2500kn, 500-1000kn
• Operation Mode: Automatic, Fully Automatic, Manual
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Brand Name: Kear

Closed Oven - Rotomoulding machine Most Fuel efficient machine. Very common & accepted way of operation which is very easy & operator friendly concept. Lowest project cost even for wide range of products to be produced Faster return of investment due to lesser production cost Flexibility of different models to produce from 200 Itr to 5000 Lir vertical tanks as well as loft tanks. Low pressure Burners which are very simple & can be adjusted from outside. This provides faster heating & ease of usage even for unskilled operator Practically lesser maintenance.

• Voltage: 440V - 3 Phase
• Power: depending on machine model
• Machine type: Horizontal and five point pin double toggle type
• Models: 50 tons to 450 tons
• Motor Type: Induction (with VPD,with out vdp)

Our well constructed Plastic Injection Moulding Machines are in high demand in the market. These Moulding Machines have a sturdy construction and have a long service life. The Plastic Injection Moulding Machines are subjected to a series of tests to ensure that they comply with the requisite industry standards. The Moulding Machines are available to clients at market leading prices. Our Machines are very efficient and reliable. The Plastic Injection Moulding Machine is equipped with several features and devices that enable its smooth and hassle free operation. Features : LCD computer control with big display screen Hydraulic double proportional valve Hard chrome plated high tensile strength steel tie bars Generous space for fitting large moulds Large opening stroke Two position transducers to control Clamping and Injection Four stages of injecting, independent velocity and pressure control Hydraulic mould height adjustment device Screw cold-start prevention device Melt decompression control Screw back pressure control Multiple hydraulic ejection Differential high speed clamping Centralized lubrication system Low pressure mould protection device Capacity : 15 Ton to 1000 Ton

• POWER CONSUMPTION: 30-50 %
• HIGH PRODUCTION: 10-30%

We are offering horizontal pet preform plastic injection moulding machine. Standard features : - high production capacity with high power saving. - automatic mould height adjustment. - hydraulic, electrical, mechanical safeties. - large tie bar distance & platen area. - user friendly controls cause easier to operate. - auto lubrication system with grease. - low noising level - mould safety system - low maintenance cost electrical accessories : - plc controller b & r system or streamline controls pvt ltd. - electric wiring with finolex wire r.r cable. - electric accessories:tcselectron. - temp. Controller - servo motor : phase motion (tde macno),germany. - drives : tde make in italy - linear scale:gefran. - hydraulic injector through the linear scale mechanical accessories : - hydraulic valve & pump yuken india ltd. Or rexorth bosch ltd. - stainless steel material hopper with magnet - hard chrome platen tie barwith double grinding and micro finishing. - mould plate again casting sg iron casting, word class. - en-41b gas nitride screw barrel withmixing zone. - radial piston hydro motor made inintermation. - phosphors bronze bushing. - refilling screw rpm counting system. - 5 stage injection pressure system.

• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year
• Automatic Grade: Automatic
• Weight: 10-100kg
• Motor Power: 5-10kw

Surface International manufacturers COKE INJECTION MACHINE. This machine is widely used for Controlled Coke injection in the molten metal for making Steel Alloy. The machine entails a substantially built hopper having Storage Capacity 1 to 2 m3 Coke. This hopper is mounted on load 3 cells. The Coke is conveyed by a screw conveyor through a variable drive unit. The flow of material is controlled by a PLC controller which provide actual feed rate of coke form the machine and also permit in flight correction of the rate to achieve precise coke feeding time. The coke injection system has a rotor type Gunning machine which conveys the coke in a hose pipe to the furnace where it is injected into the molten metal through a metallic Lance. A Dust collector is provided with the system to take care of the coke dust generated during the process and keeps the environment friendly and Dust free. Coke injection rates 20 to 100 Kg. per min can be achieved with the machine and the required data can be entered on the MMI unit of PLC.

• Type: Automatic
• Certification: CE Certified
• Voltage: 380V
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1 Year
• Weight: 100-1000kg

To satisfy the needs of plastic product manufacturing industries, we offer our precisely designed range of Plastic Injection Molding Machine. This machine is manufactured and designed at our production unit by using strong components and top-notch technology. Used to melt and shape the mixture of polymer and other ingredients, this machine is excellent in performance. With it's easy to use functionality and low maintenance, clients highly demand this machine. We provide this machine at the most feasible prices to our clients.

Bring-forth a wide Gamut of Plastic Injection Moulding Machine, specifically made in India, we, Indian Machine Mart, are active in the market as a largest exporter of Industrial Machines to serve International clients at the most reasonable rates. Offered moulding machine has a wide usage in varied industries for making automotive parts, medical equipment, electrical & electronic components, caps & closures, technical parts, and writing instruments. Comprising an injection unit, clamping unit, hydraulic system, and control unit, this machine makes plastic products by utilizing injection moulding technique. Available in varied models with different production capacity, offered range of plastic moulding machine can be availed from us at competitive price. Incorporated with highly efficient and noiseless hydraulic pump system, offered machine is considered as one of the most energy efficient Injection Moulding machines, which further achieves long term productivity and offers environmental compatibility. This machine available in a series of model with varied specifications is built with high quality components to ensure reliable and long term functionality. Moreover, its automatic mould height adjustment saves both the cost and time of the user while changing the mould for making particular product. Additionally, its hydraulic system helps in uniform and precise movement of the machine as well as transfers greater forces. Additional details: Optimum rigidity Short locking time High opening force Requires small space for installation Low power consumption Advance operating system Long run working capacity