Automotive Sensors Dealers in Nagpur

• Application: Automobile Use, Industrial Use
• Color: White
• Power: 15w, 20w
• Warranty: 1year
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr
• Power Frequency: 50/60 Hz

The Product is New Energy Saving Device, It Adopts Good Sensitivity Detector, Itegrated Ckt. It Gathers Automatism, Convenience, Safety,Saving Energy & Physical Functions. It Works By Receiving Human Motion Infrared Rays. Now Switch On/off Your Lights, Bulb,Cfl, Etc By Automatic Use Infrared Pir Motion Sensor Life -  More Than 5 Years Use -  Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking Area & Etc Quality Control Standards : Operating Volt -  Ac 220-250v 50hz-60hz. Load Power -  upto 300/1200w Max Ambient Light -  3-2000 (adjuestable) Load Type -  Incandescent Lamp, Led Light, Clf, Fans, Etc  Detecting  Distance -  0~7m Detecting Angle -  360 Degree. Installation Height -  2.2-4 Mtr Motion Detetion Speed -  0.6~1m/s Power Cusumption  - 0.1w (static) & 0.4(work) Working Humidity -  Less Than 93%rh Delay -  10 Seconds -7 Minutes (adjustable) Product Installation : keep Sensor Unit 1.6 Mtr Higher from the Ground Level the Light, such as Incandescent Lamp Which Emits High Heat Should Be Kept from the Switch Away, or It Will Be Turn On/off Voluntarily. On Being Fixed to the Wire First Time, the Switch' Initialization Will Take 1-2 Minutes. It's Natural for the Switch to Turn On/off Voluntarily. When You Install the Switch On Daytime, the Default State of the Switch Will Make the Light Off.keep the Detector of the Switch from Illumination, & Then the Light Will Turn On. the Darker, the Switch Will Be More Sensitive. if It is Not Very Sensitive, Turn the Yellow Port Counterclockwise with a Long and Thin Tool to Get a Proper Light Sensitivity. Package Includes  -  1 X Infrared Switch Board 1 X Wall /celing Fitting Plate 1 X Instionas Manual 2 X Mounting Screw Bill

Motion Sensor that we offer is highly appreciated by the customers for its dimensional accuracy, high performance and durability.  We are named among the renowned Suppliers of Motion Sensor from Maharashtra, India. Our Motion Sensor is sourced from the reliable sources of the market. To ensure defect free delivery of our Motion Sensor at the customers’ end, it is stringently tested on various quality parameters before its final dispatch.

We are offering fuel level sensor. Agecho ultrasonic sensors salient features: • agecho ultrasonic sensors are available with output options such as analog current 4-20ma,analogue voltage 0-5v,onoff signal, trigger output for multi-sensor application, pulse width ,serial ttl ,serial rs 232c. • agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). • agecho accuracy is 1% of the full scale. • agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) • agecho is very useful non-contact type of sensing or presence or counting of object. Onoff type signal is also available. • agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distancedepth reading with better calibration and communication with the controller module. • agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. • agecho very useful for non-contact distancelevel measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. • agecho operating temperature 0 to 65 degree celsius. • agecho temperature compensated measurement for better accuracy (optional). • agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.

• Frequency: 200 KHz
• Brand: AG Electronics
• Sensing Distance: upto 3 meters
• Detection Distance: 3 Meter
• Input Trigger Signal: Continuous,triggered,pulse width,serial TTL,RS232,RS485
• Output: 4-20 mA ,0-5V , Pulse
• Sensor Angle: 8 degrees
• Operating Temperature: 0-70 degrees Celsius
• I deal in: New Only

Product Category : Instrumentation and Control System Lab Trainer (Series: 1000)Product Name : Speed measurement using Optical TransducerModel No.: SE-1031Product Details : The Trainer is intended to study the speed measurement using optical transducer. This has Built-In DC +5V/+12V/500mA regulated fixed Power supply, the circuit uses Optical TX-LED and RX-Photo diode sensor coupled with the AC Motor wired with associate circuitry of schmitt trigger, microcontroller based counter and display driver to study the Speed/RPM measurement of AC Motor using optical sensors, facility to control the speed of AC Motor, 4 digit LED Seven segment display, complete setup with maximum test points. Objectives : To Study the principle of Opto-Coupler used for determination of RPM. To observe & Note the speed of a given motor using optical transmitter & receiver unit. Accessories Included :  Digital Multimeter (DMM), CRO 20MHz. Accessories Included :  AC Motor with speed control.

automobile knock sensor, automobile axle, automobile mudguard