Burhani Tools Centre Gandhibagh, Nagpur, Maharashtra

A piece of hard material curved or bent back at an angle, for catching hold of or hanging things on is attached with wire rope sling.

  Wire rope is often used in slings because of its strength, durability, abrasion resistance and ability to conform to the shape of the loads on which it is used. In addition, wire rope slings are able to lift hot materials. Wire rope used in slings can be made of ropes with either Independent Wire Rope Core.

In arc welding an electrode is used to conduct current through a work piece to fuse two pieces together. Depending upon the process, the electrode is either consumable, in the case of gas metal arc welding or shielded metal arc welding, or non-consumable, such as in gas tungsten arc welding. For a direct current system the weld rod or stick may be a cathode for a filling type weld or an anode for other welding processes.

Web sling is a flexible strap or belt made up of polyester used in the form of a loop to support or raise a hanging weight.

A vernier type dial gauge utilizes the movement of the verniers jaws as a measurement input. These gauges indicate measurements both on the dial and on the conventional vernier scale. The vernier type gauge is capable of producing very accurate measurements across the vernier's standard inside and outside diameter and depth measuring ranges. The analog dial gauge may be capable of allowing the needle to travel around the dial several times if the measurement input is large enough. These gauges then have a second, smaller dial, much like a wristwatch lap timer, on their face which indicate the number of full revolutions of the needle.

A Vernier scale allows more accurate interpolation, and is the universal practice to measure the distance between 2 opposite sides of an object.

ool box with sufficient space is available where different kind of tools which are mostly used can be kept systematically.

A tool bit is a non-rotary cutting tool used in metal lathes, shapers, and planers and are distinguished from other cutting tools such as a saw or water jet cutter.

TIG Welding Wire is made of tungsten or a tungsten alloy, because tungsten has the highest melting temperature among pure metals, at 3,422 °C (6,192 °F). As a result, the electrode is not consumed during welding, though some erosion (called burn-off) can occur. Electrodes can have either a clean finish or a ground finish—clean finish electrodes have been chemically cleaned, while ground finish electrodes have been ground to a uniform size and have a polished surface, making them optimal for heat conduction. The diameter of the electrode can vary between 0.5 and 6.4 millimetres (0.02 and 0.25 in), and their length can range from 75 to 610 millimetres (3.0 to 24.0 in).

A welding torch head is used to weld metals. It can be identified by having only one or two pipes running to the nozzle and no oxygen-blast trigger and two valve knobs at the bottom of the handle letting the operator adjust the oxygen flow and fuel flow.

Teflon tape is a polytetrafluoroethylene (PTFE) film for use in sealing pipe threads. The tape is sold cut to specific widths and wound on a spool, making it easy to wind around pipe threads.

Teflon (PTFE) has excellent thermal and electrical insulation properties. And, it has a low coefficient of friction. It is difficult to make anything adhere to PTFE. A material may stick to it, but the material can be peeled off or rubbed off. PTFE was the first fluorocarbon. It is the most chemically resistant plastic known. Only a few chemicals react with it. Its mechanical properties are low compared to other engineering plastics, but its properties remain at a useful level over a great temperature range — from -400 to 500°F (-240 to 260°C). Teflon rods are cylindrical Teflon bars that has outstanding wear resistance and low frictional properties and are normally available in 1 Foot Length. Its varied applications include making of Teflon Bushes, Gears, Sprockets, Bearings, Rollers.

These are metallic tools of different sizes, which fix onto one handle and are used to fasten and unfasten nuts on pieces of equipment.

A screwdriver is a tool, manual or powered, for turning (driving or removing) screws. A typical simple screwdriver has a handle and a shaft, and a tip that the user inserts into the screw head to turn it, where the shaft is removable and different kind of screw driver shaft can be attached as per the use.

A screwdriver is a tool, manual or powered, for turning (driving or removing) screws. A typical simple screwdriver has a handle and a shaft, and a tip that the user inserts into the screw head to turn it.

The safety shoes are available in all standard sizes to suit the requirement of worker for all his working conditions.

Safety net helps people by protecting them from injury after falling from height by limiting the distance they fall and deflecting to dissipate the impact energy. Safety net we provide can be used in in construction, building maintenance, entertainment, or other industries.

Quality, being our first priority, is never compromised. Thus, the Industrial Safety Helmets supplied by us is highly sturdy and durable. These helmets are manufactured using high quality raw materials and are used for the purpose of head protection in several construction sites. These helmets comes with inside either PVC fitting or ratchet fitting It also has ventilation & side slot for ear muff.

The safety goggles available in our store are quite sturdy and durable in nature. This goggles with lighter weight and fine finishing are available in several sizes, the maintenance of the goggles is very less and the level of safety these goggles offer is highly commendable.

Available safety belts with optimum strength, durability and sturdiness are used to protect the wearer from sudden jerks and maintains the body balance.

A router is a tool used to rout out (hollow out) an area in the face of a relatively hard work piece, typically of wood or plastic. The main application of routers is in woodworking, especially cabinetry.

Rotary hammers, also called "combo drills," are similar in that they also pound the drill bit in and out while it is spinning. However, they use a piston mechanism instead of a special clutch. This causes them to deliver a much more powerful hammer blow.

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket.

Ring spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects-usually rotary fasteners, such as nuts and bolts-or keep them from turning.