Direct Current (DC) Motor Dealers in Nagpur

By keeping our track with the latest market developments, we are indulged in providing a wide range of AC Tachogenerator. These are enormously utilized in different industrial sector for their wide applications. Manufactured utilizing latest techniques and exceptional grade material, these offered products is strictly checked on multiple quality grounds before shipping to our patrons.Features: Compact and Light Weight. High Linearity. High Stability and Extreme Reliability in Hostile. Industrial Environments. Standard Options: Supplied with Calibrated Meters for display of Speed (Rotary Speed in rpm and linear speed in mtr. min etc.). Specifications: Current: Up to 50 mA. Speeds: Up to 4000 rpm. Punching machine. Voltages: 4V to 40 V / 1000 rpm. Pole Design: 2, 8 and 48.

• Brand Name: ABB
• Material: Cast Iron
• Finishing: Polished
• Driven Type: Electric
• Shape: Rectangular
• Color: Blue
• Condition: Used
• Power: 50-150 W
• Pressure: Low Pressure
• Operating Type: Automatic
• Usage: MAchine Gear Shiftings
• Certification: ISO 9001:2008
• Voltage: 220V
• Packaging Type: Wooden Box, Metal Sheet Box
• Specialities: High Performance
• Dimension (LxWxH): 375x190x285mm
• Type: Breaker
• Weight: 10-20kg
• Wattage: 180w
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• No. of Poles: 2 Poles
• Speed: 3000-4000rpm
• Insulation Type: Class A
• No Load Current: 10 Load Current
• Commutation: Brush

hese motors have a suitable brake unit mounted on the non-driving cover. In TEFC motors, these are mounted between the end cover and fan inside the fan cover. Unless specific type of brake unit is required by the customers, the motors are supplied with AC or DC Fail Safe type of brake units. Brake Motors can be normally for brake voltages of 24 V, 190 V for DC Brake Motors. Unless otherwise required 190 V DC brake units are supplied. A suitable rectifier unit can also be supplied with the motor. Alternatively customer may make this arrangement in the supply panel.

• Phase: Single Phase
• Weight: 8 Kg
• Frequency: 60Hz
• Brand: Mercury
• Working Voltage: 415V
• Model Number: ARC-250IGBT
• Usage/Application: Commercial
• Current: 200 Amp

• Type: Torque Stepper Motor
• Certification: CE Certified
• Weight: 100gm, 150gm, 250gm, 50gm
• Power: 10watt, 3watt
• Application: Elecronic Use
• Dimension: 10-20mm, 20-30mm, 30-40mm

Stepper Motor Driver Card (Double Motor) is an Opto-isolation Interface with PC/μP/μC. The circuit of Stepper Motor Driver Card described here can control two motors up to 6Kg Torque. It converts 8 TTL-level signals into an equal number of outputs with a drive capability of 2A each. It is suitable for any other project where up to two unipolar stepper motors are to be driven. It is generally assigned to work with the PC interface; the power driver card can be connected to any other type of computer that provides 8-bit wide I/O port.  About the Circuit :The operation of the circuit is shown in figure is identical for all 8 channels. The input is connected to the PC interface card or any other port. Each signal drives a LED D1 to D8 and also drives an opt coupler IC1 to IC8. LED D1 to D8 indicates the status of input signal from PC interface. Each opt coupler is followed by an inverter consists in IC9 and IC10, which passes the signal to a driver contained in IC11. This IC is capable of supplying the necessary base current for the power transistors T1 to T8.  The logic level applied to pin1 of IC11 defines the data direction. The bit pattern supplied by the inverters is fed direct to the power transistors. The active low input of the bus drivers in IC11 are taken logic high by pull-up resistors, but can be made low by fitting a jumper (J1, J2). When J1 or J2 is removed, the relevant IC11 is switched to its high-impedance output mode (three-state), so that all eight power transistors driven by it are switched off. The base currents of the eight driver transistors T1 to T8 are limited by 1K resistors R26 to R33. When transistor is switched on, the associated LED D17 to D24 lights. The LED arrays are intended mainly to assist you while running an initial test on the stepper motor control. The LED bar shows the status of all eight motors at a glance, and will be found much handier. Each collector-emitter junction of the power transistors is shunted by diodes D9 to D16, which suppress back EMF pulses generated when inductive loads are switched. The circuits require DC power supply of 5V, which is designed using regulator IC12.

• Speed: 2000-6000 RPM
• Insulation Type: Class A
• No Of Poles: 4
• Torque: <0.20 mNm
• Current: <100 mA
• Max Axial Load: 300kg
• Model Name/Number: AMEC BLDC 1.5kW

Battery Operated DC Motors

DC Motor, inverters maintenance services, solar panel battery

ac brushless servo motor, parabolic leaf spring, Conical Spring

DC Shunt Motors, HT / LT Motors, Spindle Motors, Servo Motors

DC Motors, Integrated Circuit, Rf Module, zigbee rf module

Brush Motor Strong 204-102L, Shower Chair and Stool, Aluminium Walker

Stepper Motor, Hydraulic Pump, industrial electric motor, high torque motors

Motor, Cables, heating equipments, industrial electrical equipment