Electronic Test Instruments Dealers in Shankar Nagar, Nagpur

• Type: Mechanical Energy Meter
• Certification: CE Certified
• Weight: 100-200gm, 200-300gm, 300-400gm
• Color: Metallic
• Voltage: 3-6VDC, 6-9VDC
• Application: Energy Monitoring
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic

A combination of mobile communication and metering is used to get energy meter readings remotely. At the end of every month system will send the readings to the electricity board and the subscriber. The system at the electricity board side will automatically calculate the bill and send it to the subscriber. After verification of bill payment electricity board can cut the connection of unpaid just by sending an SMS to that subscriber’s energy meter. This system can initiate the long billing process, saves papers and time with least man power.  The main objective of the project is to develop a GSM based energy meter reading system and load control through SMS. Electricity department sends employees to take meter reading every month, which is an expensive and time consuming job. The proposed project provides a convenient and efficient method to avoid this problem. The electricity department and the user can get the readings of the energy meter of consumers via SMS. The loads can also be controlled by the user of this system via SMS using this project. A microcontroller input is effectively interfaced to a digital energy meter that takes the reading from the energy meter and displays the same on an LCD. The reading of the energy meter is also sent to the control room by an SMS via SIM loaded GSM modem. This GSM modem can also receive commands from the cell phone to control the owner’s electrical loads. It uses a standard digital energy meter that delivers output pulses to the microcontroller to perform counting for necessary action. On receiving command it can switch ON/OFF the loads. Further this project can be interfaced with a non volatile memory IC like EEPROM along with a keypad so that the user the change the mobile number as per the requirement. We are counted among the top Manufacturers and Suppliers of GSm Based Energy Meter in India.

• Application: Industrial
• Automatic Grade: Automatic

We provide consultancy in the field of energy management system  Design of heat recovery devices  Energy audit  Energy management system  Fuel conservation  Energy efficiency  Furnace design  Design of heat recovery system Improvement in efficiency of devices Design solar energy equipment  Energy management and training program

• DC Voltage :: 4V, 40V, 400V, 1000V (Auto)
• Frequency :: 10.00 Hz, 50.00 Hz, 500.0 Hz, 5.000 KHz, 50.00KHz, 500.0 KHz (Auto)
• Sp. Functions :: Data Hold, Audible Continuity, Diode Test, % Duty Cycle
• AC Voltage :: 4V, 40V, 400V, 750V (Auto) (40-500Hz)
• Resistance :: 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ (Auto)
• Capacitance :: 40nF, 400nF, 4μF, 40μF, 100μF (Auto)
• Jaw Opening :: Cable Φ 43 mm (max.) and busbar 16 mm x 65 mm

electrical meter, Cables, Submersible Cable, mcb wire, Industrial Wire

Din Rail Mounting Multiplication Meter, capacitor duty contactor

Data Acquisition System, Smart Card, rfid

Water Meters, O Rings, ultrasonic meters, Pipe Cutter, Rubber Gaskets

PE 17 RA Dual Winding Resistance Meter, EHV Cable Link Box

energy monitoring systems, RCC Door Frames, Energy Solution Service