Industrial Heaters Dealers in Medical Square, Nagpur

• Condition: New
• Warranty: 1year
• Weight: 10-100kg, 200-300kg, Etc
• Application: Residential And Commercial
• Automatic Grade: Automatic
• Feature: Durable

SYSTEM OPERATION SOLAR THERMAL: There are two types of solar water heating systems, based on type of circulation; 1. Thermosyphon 2. Forced circulation All domestic and industrial systems upto 4000 LPD (liters per day) @ 60 deg.C,; works on the principle of thermosyphon. Industrial systems beyond 4000 LPD to any capacity will work on forced circulation principle.   Thermosyphon system:: The system works on a principle called "THERMOSYPHON" (Natural circulation).Due to density difference between the cold & hot Water, the lighter hot water flows up into the tank and the heavier cold water enters the collector. Solar radiation incident on the collector panels heats the absorber. This heat is transferred to the water contained in the absorber & becomes less dense than the water in the storage tank. Hot water starts rising and settles at the top of the storage tank. Simultaneously cold water descends to the collector absorber tubes, gets heated up and the cycle repeats. The circulation in the system during the heating process is purely due to the difference of density only. There is no other mechanical moving part, hence the system reliability is very high. At the end of the day when radiation is zero (after dark / sun set) the collector will contain heavier cold water and the tank will have lighter hot water. This will ensure that there will be no circulation during night & hence no conduction losses on account of this. The hot water storage tank is well insulated to retain the hot water temperature and to minimize the overnight temperature drop / heat losses. The Sacrificial Anode (Only for SS tank) prevents the tank from galvanic corrosion. For the monsoon / cloudy days the system is-fitted with Electrical back up heater with thermostat. Forced circulation system: In forced circulation systems, two pumps in tandem are used for circulation of water between collector bank & system insulated tank. The pump operation is controlled by OTC (Differential Temperature Controller), which is fitted Inside the Control panel. OTC senses the cold & hot water temperature through two sensors, one fitted at the bottom of the tank to sense cold water temperature & the other fitted at the top of the last collector of the row in the collector bank, to sense the hot water temperature inside the collector The difference in temperature between the two sensor points is the criteria for the operation of the pump that is controlled through DTC. This temperature difference can be set between 0 to 10 deg, C. Solar radiation falling on the collector heats up the water inside the absorber. The temperature of water starts gradually increasing compared to the water temperature inside the tank. When this temperature difference between the sensor points reaches the preset temperature difference in DTC, the pump is switched "ON". This will result in entry of cold-water form the system-insulated tank into the collector bank & discharge of hot water from the collector bank to the system insulated tank. The process of switching ON & QFF of the pump & circulation of water continues till the end of the day. By the end of the day, the entire quantity of water in the tank reaches the system-designed temperature, provided the radiation level is at minimum of 800 watts per sq.mtr. The process of switching ON & QFF of the pump & circulation of water continues till the end of the day. By the end of the day, the entire quantity of water in the tank reaches the system-designed temperature, provided the radiation level is at minimum of 800 watts per sq.mtr.

Avail the Evacuated Tube Solar Water Heater HOT MAX model that is offered to the clients at affordable rates. The Evacuated Tube Solar Water Heater HOT MAX is high on demand in the market for high performance and durability. Standard Collector Size Flat Plate Collector (9 fin)Width - 1150mm (East -West)Length -2080mm (South -North)Evacuated Tube-Glass Tube, Collector (for 500 ltr)Width - 3100mm (East -West)Length - 2200mm (South-North) Weight of the Collector with water & legs Flat Plate collector - 46 Kgs.Evacuated Tube-Glass Tube, Collector (for 500 ltr) - 310 Kgs In domestic systems to heat water @ 60 deg C per day One Flat Plate collector is used per 100 lit.For 100 LPD system - 1 collectorFor 200 LPD system - 2 collectorsOne Evacuated Tube Collector assemlyFor 100 LPD system - 15 nos evacuated glass tubesFor 200 LPD system - 30 nos evacuated glass tubes In Industrial systems (above 500 LPD) to heat water @ 60 deg C per day One Flat Plate collector is used per 125 lit.For 1000 LPD system – 8 collectors,For 2000 LPD system – 16 collectorsOne Evacuated Tube Collector (assembly of 70 tubes each) is used per 500 ltr.For 1000 LPD system – 2 manifolds collectors,For 2000 LPD system – 4 manifolds collectors The systems can be designed to heat water at temperature up to 80deg. C Area required for installation per 1000 LPD System @ 60 deg. C is For Flat Plate collector systems - @ 32 sq.mFor Evacuated Tube Collector systems - @ 24 sq.m. Systems are available for pressures >1.0 bar

all esp heater, ESP Spare, Collecting Plates, Discharge Electrode

pvc bed sheet, Awning Fabric, awning component

Solar Rooftops