Monitors Dealers in Nagpur

• Brand Name: Omron HEM-7156
• Weight: Monitor 337 g approx without battery, Arm Cuff 163 g approx
• Model Number: HEM-7156
• Cuff Type: OMRON IntelliWrap Cuff
• Measurement Range (Pressure): SYS 60 to 260 mmHg. DIA 40 to 215 mmHg
• Usage/Application: Personal
• Cuff Circumference: fits arm curcumference 22 - 42 cm

• Application: Blood Pressure Reading
• Brand Name: Omron
• Measurement Range: Pressure 0 to 299 mmHg, Pulse 40 to 180 Beats/min
• Made in: Japan
• Memory: 100 measurement
• Accuracy: Pressure +-3mmHg, Pulse +-5% of Display reading

Features : Body Movement Detection Blood Pressure Level Indicator Irregular Heartbeat Detection IntelliSense Technology Average for last 3 readings within 10 minutes  

• Feature: High quality
• Warranty: 1 Year
• Size: 12.1 inch
• Material: ABS Plastic
• Display Type: Digital
• Use in: Hospital

Our organization stocks the items in mass. Therefore, we can serve mass/ retail requirements without hassle and make sure delivery of products is swift. The wide assortments of products we offer are strictly as per the globally accepted norms.

• Color: Grey
• Warranty: 1 Year
• Range: 0.4A to 999A
• Supply: 220V/400V/525V/690V
• Application: Fixed Speed Loads
• Protection Class: IP-20
• Minimum Order Quantity: As per Requirement

EMOTRON M20 shaft power monitor helps you save time and money. It protects your pumps and other equipment against damage and detects process inefficiency. Early warnings allow you to take preventive action. Unique features include measuring shaft power output and using the motor as a sensor. The result is reduced maintenance and installation costs, extended equipment lifetime and increased reliability. Key Features : Detects over- and under load. Sends warning or stops the pump. Using pump motor as sensor eliminates need for external sensors. No moving parts increases reliability. Shuts pump off before it runs dry.

• Application: Industrial Use
• Condition: New
• Feature: Smooth Function
• Size: Standard
• Application: Fire Fighting
• Flow Rate: Standard
• Pressure: Standard

The loom controller is integrated unit for controlling various functions of Circular Woven Sack Loom. It has a powerful 32 bit Microprocessor, which is used for Haul-off speed control, Basic loom operation and stores the various Loom data for future analysis. Two proximity switches mounted on Main motor shaft and Haul motor shaft measure the speed, and on basis of these speeds, the haul off speed is controlled to get the desired Weft Density of fabric. The 32-bit microprocessor also takes care of loom inertia with PID loop, so that during Start, Stop and inch period, Weft density is maintained. It is compatible with most of the leading brands of Loom. It controls weft density, start / stop / faults, lubrication, winder motor, take up motor. It also monitors and records shift wise production, faults, loom run time, warp / weft breakages, loom efficiency etc. It has a real time clock and battery backed memory to store data. The loom controller is supplied with warp card and 24 Volt DC power supply for warp PCB and control. The back plane connectors are similar to standard loom controllers. Hence it is very easy to replace any other loom controller with our loom controller without change in wiring. All connectors are high quality plug type, suitable for easy and fast replacement. The controller has a large Graphical LCD, which can be read, from longer distance. The display shows the current time and 4 loom parameters in bold letters. The current time is derived from battery backed up Real Time Clock, and it is also used to determine shift change over. The Keypad is arranged in such a way that menu navigation is smooth. Minimum numbers of keys are required to be pressed for any operation. Menu is very simple to operate, with many additional features. The status of Input and Output signal is displayed on the front with Green, and Red LED. This helps in easy diagnosis of the fault with minimum downtime. The advantage of these LED is that, they can be viewed from long distance. In addition, a white LED indicating the READY status of loom is also provided on front.

• Feature: Reliable ,Accurate results ,Technologically advanced ,Durable.

• Display: LCD Digital Display
• Measuring Principle: Oscillometric Method
• Power Source: 4pcs AA alkaline battery DC, 6V or AC adapter
• Automatic power off: In 3 Minutes
• Packing Type: Box

Dr. G. M Taori, MD FRCP(C) continues to be the Chief Neurologist. Daily in the morning hours he examines around 15 patients. Patients come for his opinion from long distances. Dr. Nitin Chandak, MD (Medicine), DM (Neurology) is a senior consultant in Neurology. He had his neurology training from Grant Medical College & JJ group of Hospital Mumbai & Further training at Jaslok hospital in Neuro-intensive care. He had further training in Epilepsy care at Sree. Chitra Tirunal Institute, Trivendrum. Where he had training in digital EEG and video EEG monitoring. He has special interest in acute care Neurology, in managing ischemic strokes, intracerebral hemorrhage and epilepsy. Dr. Hemant Pandya, B.Pth, Neurophysiologist is looking after the NCVEMGEP lab and is performing neurophysiological tests efficiently. We have installed a computerized EEG machine has facility of brain mapping. We are most reasonable in charges for above tests in Nagpur.

• Condition: New
• Usage: Clinic, Hospital
• Portable: Yes
• Material: ABS
• Digital: Yes
• Display Size: 60x40.5 mm

We are the leading manufacturers, exporters and supplier of this products.

• Display Type: HD (1400 x 900)
• Screen Size: 19inch
• Material: ABS
• Panel Type: IPS
• Power Supply: 220V, 50Hz
• Power: 15 W
• Aspect Ratio: 16:10
• Brightness: 220cd/m2
• Dynamic Contrast Ratio: 500000:1

      The loom controller is integrated unit for controlling various functions of Circular Woven Sack Loom. It has a powerful 32 bit Microprocessor, which is used for Haul-off speed control, Basic loom operation and stores the various Loom data for future analysis. Two proximity switches mounted on Main motor shaft and Haul motor shaft measure the speed, and on basis of these speeds, the haul off speed is controlled to get the desired Weft Density of fabric. The 32-bit microprocessor also takes care of loom inertia with PID loop, so that during Start, Stop and inch period, Weft density is maintained. It is compatible with most of the leading brands of Loom. It controls weft density, start / stop / faults, lubrication, winder motor, take up motor. It also monitors and records shift wise production, faults, loom run time, warp / weft breakages, loom efficiency etc. It has a real time clock and battery backed memory to store data. The loom controller is supplied with warp card and 24 Volt DC power supply for warp PCB and control. The back plane connectors are similar to standard loom controllers. Hence it is very easy to replace any other loom controller with our loom controller without change in wiring. All connectors are high quality plug type, suitable for easy and fast replacement. The controller has a large Graphical LCD, which can be read, from longer distance. The display shows the current time and 4 loom parameters in bold letters. The current time is derived from battery backed up Real Time Clock, and it is also used to determine shift change over. The Keypad is arranged in such a way that menu navigation is smooth. Minimum numbers of keys are required to be pressed for any operation. Menu is very simple to operate, with many additional features. The status of Input and Output signal is displayed on the front with Green, and Red LED. This helps in easy diagnosis of the fault with minimum downtime. The advantage of these LED is that, they can be viewed from long distance. In addition, a white LED indicating the READY status of loom is also provided on front.    

Catering to the varied and diversified needs of our customers, we are engaged in offering a broad array of Patient Monitor. Owing to their reliability, these offered products are highly demanded. Besides this, these are checked on a number of aspects before finally delivering these at the end of our customers. Our clients can avail these from us at reasonable rates. Features:High capacityDurableReliable and efficient

• Type: Temperature Monitors
• Application: Industrial Use
• Color: Black, Grey
• Voltage: 220V
• Screen Size: 10inch, 14inch
• Frequency: 50HZ, 60HZ
• Memory Size: 1gb, 512mb
• Feature: Durable

The Temperature Monitor is a miniature temperature controller device up to 100oC. This simple circuit of temperature monitor uses differential amplifier IC and temperature sensor. The three different colors of LED indications are used to indicate different temperatures. The temperature at which LEDs will glow set by preset P1. Generally LED D1 will glow at normal temperature. As the temperature increases LED D2 glows. At highest temperature LED D3 glows.About the Circuit : As described earlier circuit uses differential amplifier IC, IC1. The reference voltages are applied to pin2 and pin6, which are set by preset P2 and P3 respectively. The differential voltages developed at pin3 and pin5 according to the voltage produced by R1/P1 and temperature sensor, which gives an output voltage of 10mV/oC. Accordingly output at pin1 and pin7 changes and LED indication changes. At normal temperature, voltage produced by sensor is smaller than either of the reference potentials. The output at pin1 and pin7 are low: D1 will then light. When the ambient temperature rises, the output of sensor rises proportionally. When the level of the sensor output lies between the two reference levels, the output at pin1 is high and that of pin7 is low. Diode D2 will then light, showing that the critical temperature has been reached. At even higher temperature, the output at pin7 also goes high and D3 lights, while the other two LEDs will go out. At the same time, the relay will be energized via T1. Also LED D6 lights which gives visual indication. Zener diode D4 ensures that T1 does not come on when D2 lights. The temperature at which the LEDs should light can be set with preset P1, P2 and P3. The precaution should be taken that the monitor is intended for normal temperatures between 25oC and 100oC. 

We are a trusted Stand Post Type Water Monitor Exporter and Supplier. We design Stand Post Type Water Monitor under the keen supervision of the experts that ensure their high performance. We offer Stand Post Type Water Monitor at competitive prices in the market. Specifications Manufactured from seamless steel tubesStand post typeHot dip galvanizedSwivel joints with brass locking arrangementsG.M ball bearingsAluminum alloy nozzleHighly durableSimple in usePossess specific designIdeal for use in different industries Widely Used In Go-downs and WarehousesParking PlacesOfficial BuildingsResidential Building

• Accuracy: +0.4
• Model Name/Number: KaradaScan HBF 375
• Usage/Application: Gym
• Brand: Omron
• Automation Grade: Manual
• Package Contents: Body Composition Monitor, 4 AA Manganese Batteries (R6), Instruction Manual
• Battery Life: 1 Year
• Warranty: 1 Year Manufacturer Warranty
• Battery Type: AA Manganese (R6)

• Type of display: LCD
• Display Size: 5 x 7 inch (W x L)
• Parameters Measured: NIBP, ECG, Temperature, SPO2, RESP, EEG, IBP
• No of Leads in ECG: 3
• Pulse Rate Range: 200 bpm
• Type of SPO2 probe: Disposable
• NIBP Measurement range: 270 mmHg
• USB port: Yes
• Input Voltage: 220 V
• Phase: Single Phase

• Brand Name: HP, Lenovo, Dell, Samsung
• Screen Size (in inches): any size
• Warranty: Yes
• Additional Features: HDMI, VGA

• Feature: Light Weight , Quick Measurement , No Maintenance Required
• Driven Type: Battery
• Color: Light White
• Condition: New
• Automatic Grade: Automatic, Manual
• Application: Blood Pressure Reading