Bonnet Lock Set
Get Price Quote
100 Set (MOQ)
security safes
50,000 - 500,000 Per Piece
Best Deals from Safety Locks
Gold Loan Safe With Trays
Get Price Quote
Guardwel is a trusted manufacturer of Quality Physical Security & Fire Resisting Products for the Banking & Financial Industry since 1986. This ISO 9001:2008 certified and CRISILSME 1 rated organization is manned by skilled engineers and a competent Quality Control department that oversees the manufacture of hi-tech security products. Our nationwide dealer network provides prompt sales & service that a customer needs in any part of the nation. Guardwel’s range of Fire & Burglary Resistant Safes, Strong Room Doors and Safe Deposit Lockers is the simplest and the most comprehensive answer to all the concerns of enhanced attack levels. Guardwel provides a worry free solution for the safety and protection of all your valuables and belongings. Our range of Safes includes Fire & Burglary Resistant Cash Safes, Depository Safes, Gold loan safes…. Fire & Burglar Resistant Safes Body The entire body of the Safe is made from thick steel plates with the latest steel bending techniques. Made of multiple bends with fully welded construction it forms a solid rivet less block. For enhanced security, the inner lining is made of a thicker steel plate as compared to the outer and a FBR barrier that can withstand the most severe attacks. Door The doors are constructed from thick and tough steel plates, and are further reinforced with drill and hammer resistant steel plates. The door tightly mesh with the body leaving minimal & equal gap all around. Locking mechanism All Guardwel safes are fitted with locks designed and manufactured in-house with complete security and confidentiality of combinations Operated by a 3 pronged handle in front allowing fingers to fit in snugly and controlled by an eight lever dual control lock with evenly spaced shooting bolts that give a balanced pressure and ensures safety from dislodgement. Automatic Self-Locking Device The safe is also protected by an automatic re-locking device, which gets activated if the lock is dislodged by explosive or comes under attack by any other means. This ensures that the door remains firmly shut and the valuables remain safe even under severe attack. Optional The safes can be fitted with three wheel mechanical or electronic combination lock, which makes them unpickable. The chances of repeating a combination are one in a million. Bio-metric locks and digital locks or the provision for fitting them, can be availed at an extra cost. Safes with internals modified to fit gold loan trays or drawers
fingerprint Door Lock System
10,000 - 15,000 Per Piece
10 Piece(s) (MOQ)
Product Details: Time & attendence management. Automatic status switch. Most secure recognition system. Best option for traditional attendence system. Scheduled bell.
Door Lock
Get Price Quote
We keep a stern check on the payment procedures that we sternly follow and apart from this, we make a completely secured database that lists all the payments made and clients' details. Rest assured us for the payments, as we use leading technologies for the same. Committed towards satisfying our customers, we are involved in delivering quality Door Lock.
Yale digital lock
30,499 Per Piece
Padlocks
Get Price Quote
With our modern transportation facility, timely deliveries of the placed orders are assured. Be it seasonal supply, wholesale supply or quick delivery, we are capable of entertaining all your requirements as we have state-of-the-art storage space to keep the stacks of the products in an organized manner.
Electronic Door Lock
Get Price Quote
mortise lock body
1,599 Per Piece
Microcontroller Based Programmable 4-Digit Code Lock System
Get Price Quote
Microcontroller Based Programmable 4-Digit Code Lock System can change the password with alarm useful for Door Lock, Device Lock, Car Lock, and Locker System (Using 89C2051). Today is the world of automation. When we are talking about automation, we must think about microcontroller. Microcontroller finds its application in each and every automation control like Remote controllers, Hand-held communication devices, automatic and semi-automatic washing machines, security system, telephone printing machines, automobiles, indicating and measuring instruments. The project described here being also a microcontroller based project, used for security purpose. The use of microcontroller in this project is to store the data, process data and change data according to the user requirement. This is possible because microcontroller has CPU, memory, I/O ports, timers/counters, ADC/DAC, serial ports, interrupt logic, oscillator circuitry, and many more functional blocks on single chip. Hence it reduces the cost of hardware. Also there is no need to connect external RAM for memory storage. This is the most important feature of microcontroller. There are various types of microcontrollers available in market. The examples are Intel MCS-51, PIC family by microchip, ATMEL 89CXX, 89CXX51. The microcontroller used for this project is ATMEL-89C2051. The important features and pin description are given later. The code lock system described here uses a very simple hardware as shown in the circuit diagram. IC1 and IC2 are bus driver and latch IC’s, which are used for transmitting and receiving data from microcontroller i.e. it is the interface between microcontroller and keypad logic. At pin2 and 3 of microcontroller, relay drivers using transistors are connected. IC5 is a regulator IC, which gives 5V regulated power supply. Software is used to store code, process code according to user requirement and gives output at corresponding port. The device activates an output when correct access code has been entered on a keypad. This code consists of four digits in the range 0 to 9. The code can be changed by the user and is also remembered when the power is off. The circuit is eminently suitable as an electronic door-lock, the switching section of a burglar alarm or as an ignition-blocking device. The output is inactive when the circuit is powered up or has been reset. When the ‘*’ key is pressed, followed by the 4-digit code, the output will go to the 5V level and the relay connected to pin3 of microcontroller will be energized. If the code is incorrect, the wrong alarm LED connected to pin2 of microcontroller will glow. Also relay will be energized which is connected to any noise-generated device. When the code lock is used for the first time, the access code is 1234. This can be changed to, for example 4567 by first pressing ‘0’ followed by ‘#’, then the original code, then the new code. If something has gone wrong, the original code remains valid and error signal will sound. The procedure for operation of the code lock is given below. How to operate Code-Lock: Open the Lock: 1. Put on Power. 2. Press ‘*’ key ‘LOG-IN’ LED D3 will glow. 3. Now enter the old password. 4. If Code is correct ‘SYS-ON’ LED D2 will glow and lock is open. 5. If code is incorrect wrong alarm LED D1 will glow for 1 second. 6. Repeat above steps to try again. Change the Password : Press ‘0’ key followed by ‘#’ key to change the code. LOG-IN LED starts flashing. Now enter old code. If it is correct, flashing stops and LED glows continuously. Now enter new password. Flashing LED will go off and code is accepted. If code is incorrect, flashing stops and wrong alarm LED D1 glows for 1 second. To enter change mode again, repeat above steps. After entering any mode, if no key pressed for 1 minute, program goes to normal mode automatically. About 89C2051 Microcontroller :ATMEL 89C2051 is CMOS 8-bit Microcontroller. It has flash programmable and erasable read only memory. It is a 20-pin device. The pin details are given below. It has 15 digital I/O lines. The pin descriptions are given below. 89C2051 provide cost effective, compact and flexible solutions to many industrial applications. It uses only port-1 and port-3. Details of pin-out: X2 (pin-4):- Output of inverting amplifier that forms the part of the oscillator and input to the internal clock generator. In case of external clock, it must be connected to X2. X1 (pin-50):- X1 is the input to the inverting amplifier that forms part of the oscillator circuit. In case of external clock, this pin must be connected to ground. Vcc (pin-20):-This pin is connected to +5V power supply. Vss (pin-10):-Vss is the circuit ground. RXD (pin-2):-serial input. TXD (pin-3):-serial output. INT0 (pin-6):-external interrupt. INT1 (pin-7):-external interrupt. T0 (pin-8):-Timer/Counter0 external input. T1 (pin-9):-Timer/Counter1 external input. Software: Software for this code lock system is already programmed in 89C2051. You have to only insert IC in IC socket and run it.
anti lock braking system
Get Price Quote
T Handle Lock
200 Per Piece
Flush Lock
Get Price Quote
Keypad Mortise Lock
Get Price Quote
Side Cover Lock
15,000 Per Unit
elevator door lock
Get Price Quote
We have a variety of Door Locks. These locks with special design make sure that landing gate cannot be opened unless the car is in level with that landing zone.
Fingerprint Door Lock
Get Price Quote
Fingerprint Lock
Get Price Quote
Quba door locker
Get Price Quote
1 Piece (MOQ)
corrosion resistance, 2lacs life cycle tested, 15 yrs warranty , 14 pin locking mechanism,high security
cash safes
3,995 Per Piece
Biometric Locks
7,000 - 8,000 Per Piece
Hotel Locks
Get Price Quote
doors locks
Get Price Quote
Bio Metric Lock
Get Price Quote
Door Cylinders
Get Price Quote
Door Cylinders, scuba cylinders, Pneumatic Cylinders, Ammonia Gas Cylinder
Brass Mortise Lock
Get Price Quote
Brass Mortise Lock, Fire Hose Cabinet, Tower Bolt
magnetic door locks
Get Price Quote
magnetic door locks
Bedroom Cylinders For Mortice Lock
Get Price Quote
Bedroom Cylinders For Mortice Lock, Fancy Wooden Door Lock
finger print lock
Get Price Quote
finger print lock, CCTV System, Video Door Phone, Alarm System
Laptop Size Digital Safe
Get Price Quote
Laptop Size Digital Safe, Standard Glass Wash Basin