Sensors Dealers in Hingna Road, Nagpur

We are a pioneer name betrothed in presenting a vast assortment of Power Photo Sensor to our customers, which are available in different specifications to choose from. Well known for their durability, light weight and précised functioning, these offered products are highly demanded. Description: M18 Uni Photo-electric sensor (UL) M18 Ultra Short Tubular Type Photo Sensor (UL) Free Power Photo Sensor (A3 / E3 Series) Mini Water Proof Photo Sensor High Speed U Type Photo Sensor Standard Type Photo Sensor Fiber Type Photo Sensor General Purpose Light curtain M18 Tubular Photo Sensor` Amplifier Separated Type Photo Sensor Mini Type Photo Sensor Amplifier Separated Type Photo Sensor Attachment At Mark Sensor M30 Long Distance Thru Beam Type Photo Sensor

• Temperature Range: 0 To 400 Deg C
• Material: Stainless Steel
• MAKE: THERMO SENSORS
• Configuration: Simplex
• Probe Diameter: 0.5 - 8 mm
• Probe Termination: Lead Wire

The circular Loom used in woven sack industry has 4–8 shuttle bobbins which provides the weft tapes to circular fabric. If this tape breaks, the fabric is wasted as it contains lots of missing tapes. Our Weft Break sensor has been used widely to detect these types of breaks and avoiding the wastage of fabric.However there has been great demand for detection of near empty condition of shuttle bobbin, so that bobbin can be changed before it is completely empty. This results in zero defect fabric. Usually to achieve this all the shuttle bobbins are replaced at once, even if they are not empty. This results in lot of tape wastage on 'Not so empty bobbins'. Our bobbin sensor is designed to detect the near empty condition of bobbin. When the sensor detects the near empty condition of bobbin, the sensor stops the loom, so that only that particular bobbin can be changed. This not only results in Zero defects Fabric, but also Zero wastage on bobbins also. The bobbin sensor is a highly sophisticated and state of the art sensor to detect when shuttle bobbin nears empty condition. The sensor is based on Infra Red to detect the presence of tape on bobbin, and a powerful, fast microprocessor which calculates various timing and detects the near empty bobbin and sends the trip signal to relay PCB. The relay PCB stops the loom by opening the NC contact which is in series with Loom Stop button. As the sensing mechanism is based on infra red principal, color of shuttle bobbin tape and base color of empty bobbin may affect the performance of sensor, however sensor will work faithfully on Light color tape and all mild steel bobbins. The installation of bobbin sensor is straight forward. The distance between sensor and shuttle bobbin(with about 1 mm of tape on it) should be around 140-160. The LED on the top of of sensor provides useful information. The functions are as under.

Soil Moisture Sensor, Laser Diode, Controller 2 IC, db connector

The Weft sensor is a highly sophisticated and reliable device to sense the weft breakages, empty bobbin, and uneven weft tension of shuttle in Circular Loom. The design of sensor is heavy - duty type and suitable for environmental conditions of Plastic Woven Sacks Industry. The sensor works on principle of magnetism, thereby eliminating the malfunction due to dust, ambient light, reflection of fabric, which are prominent in light based sensors. The sensor is totally sealed and hence virtually no maintenance is required in day-to-day operations, if setting is not disturbed. The installation is very simple and requires fitting of boom reflector assemblies (with magnets fitted in place of diamond) on boom pipe, mounting of sensor on the loom and fitting of relay card in panel. The magnets are arranged in such a way that north and south poles of the magnets come under sensor alternately, avoiding magnetization of sensor. The 3 - core wire from sensor connects to Relay PCB. When shuttle bobbin runs out of the tape or if the shuttle tape breaks, then the magnet rotates and comes under weft sensor. This magnetic field is sensed by sensor, and Relay is energized. The contact of the Relay is wired to stop the loom and missing tape is compensated by cramming the fabric. Cramming device avoids gap due to missing tape.

Description 6 Zone Door Frame Metal Detector with LCD screen IP55 Standard (Weather proof, Water proof)Network connection, RS485 port can connect Max.32 unit’s gatesPinpoint accurately the location, size, and number of concealed weaponsSensitive level can be adjustable.

Our products are quality tested by our professionals against various parameters to render maximum client satisfaction. Moreover, we offer these products at economical prices. Features : Reasonable price Easy to install Long lasting

• Type: Measuring
• Material: PVC
• Color: White
• Usage/Application: Industrial
• Model Name/Number: Array system
• Frequency: Continues

Color Mark Sensors, device programmer, Digital / Analog Time Switch

Ir Sensor, USB Programmer, Wireless Embedded System, robotic kit

Ph Sensor, High Pressure Pump, Low Pressure Switch, RO Pressure Tubes

powerful sensors, Packaging Machines