Surgical Equipment Dealers in Gokulpeth, Nagpur

We are offering face mask. available in 1/2/3/4-ply available in blue/green/white/pink/yellow strong tie bands, 40 gsm, prevents tie snapping malleable pvc coated aluminium nose-clip prevents air leakage test reports from nelson labs (usa) for independent verification * high bacteria filtration *(3-ply: bfe>99%).

• Application: Clinical Purpose
• Usage: Clinical/Hospital
• Maximum Power Watt: 230 wt
• Max Power Output: 100 Wt
• Minimum Order Quantity: 1 Set

• Type: Blood Pressure Monitor
• Application: Blood Pressure Reading
• Color: Creamy, Light White
• Condition: New, Used
• Automatic Grade: Manual
• Feature: Accuracy, Battery Indicator, Digital Display, Easy To Carry, Light Weight

• Brand Name: V Guard
• Power: 0-2 (KW)
• Color: White
• Usage/Application: Home
• Capacity: 0-10 litres
• Max Rated Pressure: 5-10 Bar
• Mounting Type: Wall Mounted

• Type: Heart Rate Monitors
• Color: Metallic
• Voltage: 220V
• Application: Hospital Use
• Screen Size: 10inch, 12inch
• Frequency: 50HZ
• Feature: Durable, Fast Processor
• Warranty: 1year

See the heart rate pulses on LED by sensing blood flow through fingertip using the Heart-Beat Monitor. The Heart-Beat Monitor is the answer to questions like, How could anyone expect an ordinary light dependent resistor photo cell to 'see' through a fingertip in  LED Light and detect the change in blood flow as the heart pulsates? The secret is a high gain circuit, based on a dual op amp IC which can be either the low power CA3140. The LDR is connected in series across the 9V battery supply via a 100kOhms resistor (R2) and VR1 the minute signal used by the blood pulsing under the skin is fed to the non-inverting (+) input, pin 3, of IC1a via a 0.1µF capacitor. Pin 3 is biased by a high impedance voltage divider consisting of two 3.3M Ohms resistors. The feedback resistors to pin 2 set the gain to 11 times. The output of IC1a is fed via a 0.47µF capacitor and 220k Ohms resistor to IC2. This is configured as an inverting op amp with a gain of 45 so that the total circuit gain is about 500. The output of IC2 is used to drive an a LEDNote that the unit is designed to use the good quality light dependent resistor (LDR.) Other LDRs may require a change in the value of resistor R1& VR1. A light source such as a high brightness LED is required. All that is needed is a reasonably well-lit room, preferably natural daylight, to produce a healthy emit LED. Only when the hands are very cold does it make it a little more difficult to accurately count the pulses. To check your heart rate, carefully position your thumb or finger over the LDR and count the LED fluctuations for a period of 15 seconds. Then multiply the result by four to obtain your pulse rate. The circuit cannot be used if you are walking or running, etc.

• Material: Stainless Steel
• Display Type: Analog
• Packaging Type: Box
• Weight: 200 to 350 Gram
• Material Grade: SS316L
• Meter Shape: Round

heart rate monitors, monitor, Defibrillator, centre oxygen pipe

Nublexa, Onglyza Tablet, Torsemide Tablets, Forxiga Tablet

We are offering led lights. All range of led products available. We can also help with customised products for led luminaires, displays etc.

Led Lights

ICU Ventilator, Patient Monitor, Ecg Machine, ot equipment, Icu Equipment

Face Mask, hand sanitizer

Pulse Oximeter, Medical Equipments, ultrasound machines, Multi Para Monitor

Hygiene Products, Agricultural Equipments, z purlins

pluse oximeter, Medical Equipments, Fetal Monitor

Chair Stretchers

Defibrillator

Electrosurgical Equipment, DIY ELECTRONIC KIT, DIY ELECTRONIC KITS

Autoclaves, Ovens, seed germinators, sterilizers

Slit Lamps, tonometers and diagnostic devices

air conditioning, Heating Equipment, Ducting