Testing Equipment Dealers in Nagpur

• Body Material: Plastic
• Color: White
• Design: Pocket type
• Automatic Grade: Fully Automatic
• Power Source: Battery
• Application: Indsustrial Usage
• Model Number: AMPEC
• Certification: CE Certified
• Feature: Accuracy, Durable, Light Weight, Low Power Comsumption
• Voltage: 3-6VDC
• Display Type: Digital
• Type: Digital Ph Meters
• Weight: 100-200gm
• Warranty: 1Year
• Display: Digital
• Testing Range: 1 _14
• Parameter Sampling Rate: 10 sec
• Physical Dimension: 6 inch x 2 inch
• Features: Precise design , Durable , Rugged

We supply precision-engineered online monitors and controllers such as td, ph, ec and orp monitor and controller. Apart from these, the most prominent models are as follows: pc 042 conductivity monitor this is panel equipment used for online monitoring of industrial process conductivity and coupled with signal collecting and processing technology along with special thick film circuit, owing to these circuits accurate measurement and stable operation is ensured. Various other features include linear zed data, automatic temperature compensation that are maintenance free. These instruments are ideal for various kinds of small pure water systems.

• Type: Optical Power Meter
• Certification: CE Certified
• Application: Indsustrial Usage, Power Monitor
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic
• Body Material: Plastic
• Power Source: Battery
• Feature: Accuracy, Light Weight, Low Power Comsumption
• Warranty: 1Year
• Brand Name: Ragis

Product Category :  Electrical Network Circuits and Bridges Lab Trainer  (Series : 600)Product Name : Kelvin’s Bridge (Double bridge)Model No. : SE-634Product Details   This has Built-In DC +12V/500mA Power supply with current limiting resistor Rs, the arms of resistive bridge uses four fixed and one variable known resistors wired with three Unknown very low value resistor Rx1/Rx2/Rx3  to study the Kelvin's Double Bridge to determine the value of these unknown resistors, facility to select three low value unknown resistors, Galvanometer used for null indication, maximum test points.   Objectives : To Study the Kelvin's Double Bridge. To Study measurement of Low Resistance Using Wheatstone Bridge. To Compare the Theoretical and Practical Values. Accessories Included :  Set of Patch Cords, Operating Manual.  

• Material: Aluminum, Brass, Cast Iron, Copper
• Voltage: 110V, 220V, 230V
• Application: Industrial
• Warrenty: 1 Year, 2 Years
• Feature: Accuracy, Digital Water Meter Display, Lorawan Compatible
• Automatic Grade: Semi Automatic

After giving tough competition to our contemporaries in Nagpur(India), we have now come forth to challenge the providers in other markets. Clients can make payment through online and offline payment methods, with which they are comfortable. Our payment policies are transparent and we do not impose hidden charges. The offered Tablet Disintegration Test Machine is available with a beaker capacity of 1000ml.

• Color: Grey
• Warranty: 1 Year
• Range: 0.4A to 999A
• Supply: 220V/400V/525V/690V
• Application: Fixed Speed Loads
• Protection Class: IP-20
• Minimum Order Quantity: As per Requirement

EMOTRON M20 shaft power monitor helps you save time and money. It protects your pumps and other equipment against damage and detects process inefficiency. Early warnings allow you to take preventive action. Unique features include measuring shaft power output and using the motor as a sensor. The result is reduced maintenance and installation costs, extended equipment lifetime and increased reliability. Key Features : Detects over- and under load. Sends warning or stops the pump. Using pump motor as sensor eliminates need for external sensors. No moving parts increases reliability. Shuts pump off before it runs dry.

• Warranty: 1 Year
• Type: Clamp Meter
• Brand: Metravi
• Usage/Application: industrial & General
• Jaw Open: 24 mm, 16 mm
• Digit Display: 4

We are a pioneer name betrothed in presenting a vast assortment of Power Photo Sensor to our customers, which are available in different specifications to choose from. Well known for their durability, light weight and précised functioning, these offered products are highly demanded. Description: M18 Uni Photo-electric sensor (UL) M18 Ultra Short Tubular Type Photo Sensor (UL) Free Power Photo Sensor (A3 / E3 Series) Mini Water Proof Photo Sensor High Speed U Type Photo Sensor Standard Type Photo Sensor Fiber Type Photo Sensor General Purpose Light curtain M18 Tubular Photo Sensor` Amplifier Separated Type Photo Sensor Mini Type Photo Sensor Amplifier Separated Type Photo Sensor Attachment At Mark Sensor M30 Long Distance Thru Beam Type Photo Sensor

• Brand Name: Systronics
• Calibration: Manual
• Resolution: 0.01
• Model Number: 335
• Type Of Ph Meter: Table-Top
• Usage/Application: Laboratory

• Power: 230 V, 50 Hz single phase, AC supply
• Country of Origin: Made in India
• Material: Stainless Steel
• Display: LED Display
• Frequency: 50 Hz
• Temperature Resolution: 0.1 DegreeC
• Brand: EIE
• Accuracy: +- 0.5 DegreeC
•  :  

• Type: Digital Tester
• Certification: ISI Certified
• Application: Control Panels, Industrial Use, Power Grade Use
• Color: Multicolor
• Frequency: 45Hz, 66Hz
• Automatic Grade: Automatic
• Feature: Easy To Use, Four Times Stronger

The 555IC Tester is used to test most widely used 555IC. The use of Timer IC555 proves its importance in almost most of the circuits. So it becomes necessary to build such a design to test this most popular IC. Although the IC555 is generally very reliable, there are occasions when malfunction does occur. The circuit shown here will provide a simple and effective method of testing suspect devices.About the Circuit :The timer to be tested, IC1 is connected as an astable multivibrator. When the push to test button ‘S1’ is closed, capacitor C1 will start to charge up via resistors R1 and R2/P1. As soon as the voltage level on this capacitor reaches the trigger point of the timer, the internal flip-flop is activated and pin7 is taken low to discharge C1. The flip-flop is reset when the voltage on C1 reaches the threshold level of IC1. This takes pin7 high and the charge cycle starts once more.   The output of the timer pin3 is connected to a pair of light emitting diodes. When the output is high, LED D2 will be ON and D1 will be off. Conversely, when the output is low D1 will be ON and D2 will be OFF. The LED will flash ON and OFF alternately provided, of course, that the IC under test is a good one.   For readers who may have other application for the circuit and who wish to alter the frequency, the rate at which the LED flash is determined by the values of R1, R2/P1 and C1. The frequency of oscillation can be calculated from the formulaf = 1.44/(R1+2(R2+P1))C1If, as in this case, the value of R2 is much greater than the value of R1, the frequency can be approximated from the following                   f = 0.72/(R2+P1)C1

Continuity tester is a simple instrument and easy to operate. Continuity tester is suitable for checking continuity of any electrical circuit. construction:-the casing is made of unbreakable plastic. In principle it consist of a neon indicator activated by two penlight cell which normally last for many hundred testing.  instructions :- (1) connect both ends of the circuit at the firing point to the contact socket (terminal).(2) press button to make test, if the circuit is complete the neon will glow, if not there is a break in the circuit. (3) the shot firing cable is tested by connecting the two wire of one cable end to the continuity tester. if the two wires on the other end are free, the neon will not glow. If it glows, this indicates a shot circuit some where in the cable. if on the other hand, the neon does not glow when the two wires at the free end of the cable are connected to each other, then there is a break in the cable. 

• Material: SS
• Temperature: Upto 100 degree C
• Length: Approx 120inches
• Product type: Tension Tester

PIX Digital tension meter is used to correct the tension factor in a drive, thus helping the users' to attain the optimum Belt tension. This equipment works on frequency measurement phenomenon. Non-contact measurement with repeated accuracy Large range of measurement from 10Hz to 600Hz High level of accuracy Evaluation of the quality of measurement results Universal measuring head for convenient measurement Detachable measuring sensor for narrow spaces

• Type: Panel Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Application: Panel Monitor
• Display Type: Digital
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years

• Shape: Square
• Certification: CE Certified
• Voltage: 110V
• Application: Industrial
• Display Type: Digital
• Rated Power: 100W
• Power Source: Electric
• Warranty: 1Years

• Brand Name: Fluke
• Warranty: 1 Year
• Display Type: Digital
• Measuring Current Range: 2000uA-10A
• Measuring Voltage Range: 200mV-1000V

We are offering flow meter bpc ( brass body). the back pressure compensated(bpc) flowmeter incorporates a rotary pin valve control to permit adjustment of the flow rate to any desired level between 0-15 ltrsmin.

• Brand Name: Thermo Sensors
• Application: Laboratory
• Temperature Range: -50 to 380deg C
• Spectral Response: 5-14 um
• Display: Digital

• Type: Hand-Held, Table-Top
• Type of PH Meter: Portable
• Display: Digital
• Is It Water Proof: Water Proof
• Features: Ph Meter
• Usage/Application: Water ph measurement

• Display Type: Analog
• Brand Name: DEIF
• Operating Temperature: 40 Degree Celsius
• Voltage: 440 V AC
• Frequency: 65 Hz
• Model Name/Number: 2FTQ
• Material: Plastic

Introducing the MDX-600 series from Midtronics, worldwide leader in battery and electrical diagnostics. The new MDX-600 series combines over 20 years of experience and innovation gained from selling essential tools to nearly every car and truck OEM in the world, with the industry standard conductance technology for battery testing, which makes testing safe, fast, and simple. SAFE to use anywhere, even in front of the customer FAST and accurate testing of the battery or electrical system in seconds SIMPLE, proven user interface eliminates guesswork and user error to provide an accurate analysis every time The MDX Series advanced features include: Multiple vehicle applications, battery types, and rating systems Large back-lit screen and improved user interface Integrated printer option Improved Removable Cable Design Which helps to: Save time and money by improving battery and electrical diagnostic productivity Improve customer service by reducing wait time Increase sales by proactively testing batteries and electrical systems Increase customer satisfaction by identifying potential problems before they occur

An LCR meter is a type of electronic test equipment used to measure the inductance (L), capacitance (C), and resistance (R) of an electronic component. In the simpler versions of this instrument the impedance was measured internally and converted for display to the corresponding capacitance or inductance value. Readings should be reasonably accurate if the capacitor or inductor device under test does not have a significant resistive component of impedance. More advanced designs measure true inductance or capacitance, as well as the equivalent series resistance of capacitors and the Q factor of inductive components.

• Brand Name: Symbol
• Warranty: 6 Months
• Model Name/Number: SM - 203
• AC Voltage: 600V
• Display: Digital