Cutting Machine Dealers in Nashik

Widely used in bearing industries for final sizing of bearing recess in microns with good finish. The cutter goes in set of six nos.for one operation of sizing. Grade used to mfr the cutter is very special and gives good edge retention and finish while use. Salient Features : Special Carbide grade developed for this application.Good cutting edge retention.Good functional life with high surface finishManufactured in closer tolerances Applications : Bimetal bearing manufacturing industry.

• Usage: For bevel cutting of cs
• Product Name: Koike
• Thickness: 40 -100 mm

For bevel cutting of steel

• Brand Name: Stop And Tech Machine
• Country of Origin: India
• Weight: 70kg
• Model Name/Number: SNT1234
• Capacity: 50 to 200 Kg / Batch
• Driven Type: Manual
• Table Size: 700x900x900

• Phase: Single Phase
• Voltage(Volt): 220 - 440
• Frequency (Hz): 50 - 60
• Body Material: Mild Steel
• Surface Finish: Powder Coated
• Automation Grade: Automatic

We are offering cnc oxyfuel, plasma profile cutting machines etc. Our greatest strength is our ability to adapt our standard equipment to fully satisfy your particular application. general features •dual drives on long axis: •customised bed size: band sizes available from 1.5m x 6.3m to 3m x 12m which is customisable as per customers requirement. •industrial grade arm chip plc controller: •dual drive ac servo: high quality schiender / panasonic servo drives with encoder feedback. •high precision planetary gearboxes: high ratio reduction gearboxes provide excellent smoothness and resolution •precision rack and pinion drives on x & y axis (gudel or similar) •flexible cable carriers on both x & y axis •multi torch options: add upto 10 oxyfuel torches for higher productivity. •50mm, 100mm, 150mm,300mm cut capacity: we supply torch with nozzle sets (nm type torch) which will cut upto 300mm ms. •auto ignition system: automatically lights up the oxy fuel torch •auto cycle:: automatic ignition, preheat and cut cycles. •smooth ball screw driven z axis •capacitive torch height controller for oxyfuel torch •arc voltage automatic torch height controller for plasma torch to maintain precise distance between plasma torch and work plate. controller features industrial grade arm chip plc controller standard shape library corner speed control wireless remote control (optional pendant) break point resume, auto power break resume, break point memorythick plate outside edge pierce and thin plate cross-bridge function built in kerf compensation function 256mb program storange usb port connection for program transfer automatic nesting (basic nesting can be performed on the controller itself) pc based mach3 controller option also available with touch screen monitor and wireless remote pendant.

We manufacture and supply a good quality bus bar cutting, punching & bending machine for aluminum & copper bus bar up to size 200 x 15 mm. Our all in one type bas bar fabrication machine is very use full for bas bar manufacturing purpose.

Less power consumption compared to Hacksaw Continuous Cutting by Means of Circular Endless Blade Smoother & Faster Cutting compared to Hacksaw Easy & Precise Gravity Manual Feed Control Makes Optimum use of the blade due to Rewelding of Blade Special Swing cut Operation to cut larger Section

multi blade block cutting machine (Multi Cutter Machine for Granite) for cutting block into slabs with multi-blade combination. This machine is the ideal equipment for producing large quantity of slabs. This is specially designed multi cutter machine for granite in India.Total cast iron construction structure enable this very sturdy machine of NO vibration during cutting, hence to maximize its cutting accuracy.

• sizes: 1.5M x 6.3M to 3M x 12M

We manufacture a wide range of standard and special purpose fixed and portable CNC Plasma Cutting machines. Our greatest strength is our ability to adapt our standard equipment to fully satisfy your particular application, Wireless remote control (optional Wireless pendant),Break point resume, auto power break resume, Thick plate outside edge pierce and thin plate cross-bridge function.

• Color: off white/grey blue

We are offrering clc/aac light block wire cutting machine. name: clc/aac light block wire cutting machine. machine massif dimension (h/l/w): 1800/1600/1900mm or machine size depends on mold cover size. power capacity required: 4hp. size of total mold block (l/w/h): 1200*1200*625or850mm. (in which size: 0.9mm block cube can be cut.) material required: only fly ash cement blocks can be cut. actual output: 8 to 10 hours or depend on casting. operating mode: automatic. operating time for machine: 3 to 5 min. operating staff: 3 to 5 persons.

• width: 1,500 mm
• length: 1500mm , 3000, 4500mm, 6000mm
• accuracy: ± 0.5 mm

Portable CNC Profile cutting machine is an economical portable light weight CNC cutting machine to cut complex shapes of high quality with Oxy-fuel and Plasma cutting. The machine can be programmed to cut any plane shape parts composed of beeline and arc, which are same as large gantry cutting machines. It is equipped with a 7 inch LCD with dynamic and static graphical display.It can be programmed to cut parts directly, and also can be operated by using GCode generated by CAM program (Nesting software), and then be transfered to the machine via its USB Port. The CNC Controller on the machine has Memory capacity is more than 3000 files.

Simple, compact single station system to cut the extra flash from components outer face. Quick operation for flash removal. Quick changing fixtures to accommodate different components. Can accommodate job from diameter 10 mm to 100 mm. Cycle Time < 5 sec.

• Suitable Material: Rubber, soft plastic, leather, etc.
• Area of Pressing Plate: dia. 148mm
• Stroke: 100 mm
• Output: 1000 kg
• Power Source: Air compressor, about 7 kg/cm
• Attachment: Cushion board one piece.

Product Description   Specimen Press(cutter) for cutting flat and soft paper, leather, rubber, plastic materials into samples or standard shape specimen. Testing Machine of Specimen Press is able to coordinate with various cutters to cut them into samples or into standard shape specimen. Ready for tensile resistant test, tearing test, elongation, aging, sample, and other tester. This tester is suitable for soft material such as paper, rubber, soft plastic, polyfoam, etc.. Pneumatic specimen press takes advantage of pneumentic compress to provides an automated media force to give a easy and clean cutting environment foe specimen preparation v. This test product can meet your testing requirement and supply solutions of problems.   Safety shield provided to eliminate accidents Pressure Gauge with filter and solenoid valve is provided Electric Power for safety shield operation : 220-230VAC. Dimension: 30×40×60(h)cm Weight: 50 kg Feature: Easy to operate, energy saving, time saving

• Packaging Type: Boxes
• Voltage: 380 V or 220 V
• Phase: 3 phase
• Surface Finish: Polished, Powder Coated
• Application: Industrial, Commercial
• Frequency: 50 - 60 Hz

We are one of the leading manufacturers and suppliers of ‘Paneer Cutter’, manual as well as pneumatic. These Paneer Cutters are manufactured using high quality raw material. Key Features: Easy operation. Low maintenance.

• Power: AC 250V/50HZ
• Dimensions: 380x250x420mm
• Weight: 30 kg
• Length Setting: 10mm to 10 meter