CyborgSysz Pvt. Ltd. Sinnar, Nashik, Maharashtra

Equipment : PLC based Humidity chamber (Walkin type) (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile Humidity system : A steam generation tank followed by a reservoir water tank generates steam and make a non-condensing steam injection system to the chamber. A standby humidity system will be provided for continuous function during fault Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser. A standby refrigeration system will be provided for continuous function during fault Air circulation : To get an uniform temperature & humidity a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : Hygroflex sensor to sense both temperature and humidity software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

Automatic Grade : Automatic

Driven Type : Electric

Equipment : PLC based Cold chamber (Walkin type) (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser. A standby refrigeration system will be provided for continuous function during fault Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : Hygroflex sensor to sense both temperature and humidity Software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

Feature : Easy To Use, High Demand

Voltage : 220V

Finishing : Polished

Automatic Grade : Automatic

Power : 1-3kw

Driven Type : Electric

Equipment : PLC based BOD incubator (Walkin type) (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser. A standby refrigeration system will be provided for continuous function during fault Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : Hygroflex sensor to sense both temperature and humidity Software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

Type : Walk-In

Voltage : 220V

Frequency : 50Hz

Automation Grade : Fully Automatic

Temperature Range : 10 to 60 Degree C

Equipment : PLC based Humidity chamber (stand alone) (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile Humidity system : A steam generation tank followed by a reservoir water tank generates steam and make a non-condensing steam injection system to the chamber Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser Air circulation : To get an uniform temperature & humidity a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : Hygroflex sensor to sense both temperature and humidity Software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Standby refrigeration system Standby humidity system Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access  : A direct access to chamber is possible via mobile using IOT device

Voltage : 380V

Equipment : PLC based Cold chamber (stand alone) (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : PT 100 sensor to sense both temperature software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Standby refrigeration system Hooter GSM technology Extra trays Extra sensors   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

Voltage : 220V

Power : 1-3kw

Driven Type : Electric

Phase : Single Phase

Automation Grade : Automatic

Equipment : PLC based BOD Incubator (stand alone) (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : PT 100 sensor to sense temperature Software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Standby refrigeration system Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

Voltage : 220V

Frequency : 50Hz

Temperature Range : 10 to 60 Degree C

Equipment : PLC based Photostability chamber (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : PT 100 sensor to sense temperature Software : CDAQ complying 21 CFR part 11   Optional features : To avoid critical conditions and for ease of operation Standby refrigeration system Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015 New Feature : A direct access to chamber is possible via mobile using IOT device Illumination for photo : Fluorescent tubes for day light effect and U.V. tubes for ultra-violet rays  Stability test : in accordance to ICH guidelines requirement of lightning Energy Wireless access : A direct access to chamber is possible via mobile using IOT device

Automatic Grade : Automatic

Power : 1-3kw

Features Auto tured PID Con troller Temperature sa􀅌ety as pe r DIN 12880 class 3.1 Enhanced Temperature Uniformity Imported Hea􀆟ng Element Over heat & o ver Current Protec􀆟on Digital temperature controller Leak proof insula􀆟on Ven􀆟ng System for extended life span Removable Stainless steel sheleves ISO 9001:2015 Cer􀆟fied

Voltage : 220V

Driven Type : Electric

Warranty : 1 Year

Automatic Grade : Semi Automatic

Phase : Single Phase

Usage : Laboratory

Temperature Range : ambient to 1150 Degree C

Equipment : Controller based Laboratory oven Control system : PID based microcontroller for controlling temperature and cut off of thermostat with settable time Air circulation : To get an uniform temperature a High quality centrifugal blower connected to a motor will blow the air from up to down, controlled by microcontroller Heating system : SS. U shaped air heaters (generally nichrome wire) Insulation : 80 mm sheet of foam (generally glass wool) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Safety for excess heating : A settable thermostat to cut off the heating automatically Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Sensors : PT 100 sensor to sense temperature (sustain in high temperature) Software : CDAQ complying 21 CFR part 11 Certification : ISO 9001:2015 Display : 7 segment alphanumeric LED display Timer : Soak timer controller with end cycle buzzer

Feature : Rust Resistance, Fast Heating, Energy Saving Certified

Frequency : 50Hz

Automatic Grade : Semi Automatic

Power : 1-5kw

Temperature Range : 50 to 300 Degree C

Features : PLC Based Control System Ethernet Communica􀆟on Touch Screen Display Password Protected Door acce ss Complete range of Alarms Documents & Training Safety CDAQ so􀅌ware complying 21CFR part 11 Mul􀆟ple Sensors Wireless access using IO T ISO 9001:2015 Cer􀆟fied

Door Type : Front Opening

Temperature Range : -18°C To -22°C

Voltage : 220V

Power : 1-3kw

Warranty : 1 Year

Equipment : PLC based Bacteriological Incubator (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : PT 100 sensor to sense temperature Software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Standby refrigeration system Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

Material : Mild Steel

Voltage : 220V

Frequency : 50Hz

Automation Grade : Fully Automatic