Electronic Test Instruments Dealers in Sinnar, Nashik

• Accuracy: 1 % full Scale, +/- 1 digit
• Power: Battery
• Model: EC-220
• Measuring Range: 0.0 - 19.99μS, 19.99 - 199.9μS, 199.9 - 1999μS, 2.00 - 19.99mS, 20.0 - 199.9mS
• Caliberation: Up to 5-point
• Measuring Range temp. (degree Celcius): 0.0 - 100
• Accuracy (degree Celcius): 0.1
• Reference Temperature (degree Celcius): 20 or 25
• Temp. coefficeint (%): 0.0 - 3.0
• Input Conductivity cell: BNC

The continuity testers from Metrel are portable, low resistance ohmmeters based on four wires Kelvin method used to measure low contact resistances of breakers and switches, busbars joints, motor & generator windings, power transformers and others where measurements are performed with a test current from 1 mA to 100 A.

• Model LS3A: 100V, 250V 500V 1KV & 2.5KV ± 2%
• Model LS3B: 63V, 100V & 500V ± 2%
• Dimensions: 435 x 345 x 192mm

This series of Million Megohm Meters are designed to test electronic components such as paper Capacitors, Plastic Capacitors, Ceramic Capacitors, Insulators, Semi Conductors, Switches, Connectors, transformers, Motors etc. as per I. S. I. recommendations.The instruments have facility for checking insulation resistance in the range of 1 meg ohm to 10 million meg ohm after one minute of charging. Ultra stabilized power supply (.001% short term drift) permits measurements of intrinsic value of insulation resistance if required, even with capacitive loads. Separate push button controls and visual indicators for "Charge", and "Discharge" function are ideally suited for rapid and safe testing of components in a factory. Maximum output current has been limited to safe value to eliminate the risk of serious shock to operators. The instruments are available in five models as per specifications given overleaf.

• Country of Origin: Made in India
• Brand Name: SIVA
• Model Number: TWRM-25AuP
• Usage/Application: Insulation Resistance
• Usage: Laboratory,Industrial
• Display: 4 1/2 digit LCD display

Digital Conductivity Meter Portable Conductivity Meter has been developed to facilitate easy determination of conductivity of non-ferrous metals based on eddy current principle. Instrument uses a probe which when placed on the surface of metal indicates conductivity on a linear scale panel meter. The instrument can be used to measure stressed conditions if they can be related to the electrical conductivity of the specimen. Whilst the accuracy claimed is 2% however, for high conductivity samples as accuracy of better than 1% is easily obtained. The users can also, if desired, use their own sample of known conductivity in the region of interest to enhance the accuracy. The instrument is supplied in a rugged carrying case which gives complete protection and has separate pocket for probe. The equipment can be used without removing it from the carrying case

Insulation Resistance Tester, Light Intensity Measuring Instrument

battery pump

door detector, handle material detector

micro meter, Height Gauge