Infra Systems Satpur, Nashik, Maharashtra

Power Supply : 12 - 24 Volts DC Supply Protection : Reverse Polarity Protected Output : PNP or NPN NO or NC Output Indications : Through LEDs channel Indication : LED indication for each channel Response Time : On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec No of beams : 4, 6, 8, 10 , 16, 20, 16, 24, Beam By Pass : Provided in handbody protection models Protected Heights : 90 - 2000 mm Pitch offered : 11, 20, 30,40, 50, 90mm Adjustable Range : Up to 3 meters (Higher range up to 15 meters available) Standard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : Up to 55 Degrees centigrade Cross Section : 36 x 42 mm Electrical Connections : Plug in Connector for Emitter & Receiver Applicable to : Directly work with PLCs Controllers Protections : Output short circuit protected. Vibration Resistance : Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave min Operating ambient Light : 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees Suitable for : Machines with quick emergency stop Safety Light Curatins are used for preventing of hand Finger body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Precessing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPM's, Forging Presses, Injection Molding machines etc,

Features: •Easy to install & may be mounted in any position with non-critical alignment between sensors •Switches are provided for blanking by-passing individual channels •Unaffected by mains power fluctuations, also machine OFF if the screen is too dirty or oily •Barrier operates on cyclic scanning photo-electric infra-red techniques •Various barrier range heights are available from covering 90 mm to 1710 mm •Higher covering heights available upon request •Use of solid state components & special construction technique ensures that barrier is not affected by normal vibrations & shocks. •For Sensors, connections are provided through plug in connectors •Self-checking circuitry continuously monitors failure of any of the beam in the system and stops the machine if failure detected •LEO Indications are provided for status indication of each channel •LEO indication for output and sense •Flexible fixing arrangements to suit individual requirement •Increases productivity while maintaining required safety Sensor specifications: •Power Supply : 12 - 24 Volts DC •Supply Protection : Reverse Polarity •Output : PNP - NC •Output Indications : Through LEDs •Channel Indication : LED indication for each channel •Response Time : 10 - 20 m s

Type : 2

Brand Name : infra

Output : PNP-NC

We are dedicated to the manufacturing and trading of the wide array of safety light curtain for hand safety. Our products are hygienic, energy efficient, durable and easy to maintain. They are offered at competitive prices all over nation. Our clients can avail from us a complete range of Hand Safety Light Curtains, which is widely used to prevent the machine from any kind of interference. These are designed with utmost precision and perfection. Infra system offers safety light curtains 2. Outputs model are available. specifications •Power Supply : 12 - 24 Volts DC •Supply Protection : Reverse Polarity •Output : PNP - NC •Output Indications : Through LEDs •Channel Indication : LED indication for each channe l •Response Time : 10 - 20 m sec •Restart : Automatic •No of beams : 4, 6, 8, 10, 16, 24, 32 nos •Beam By Pass : Provided in handbody protection models •Protected Heights : 90 - 1710 mm •Pitch offered : 11 - 20 - 30 - 40 - 50 - 90 mm •Adjustable Range : Up to 3 meters (Higher range available) •Electrical Connections : Plug in Connector for Emitter & Receiver •Standard Cable length : 5 meters for emitter, 3 meters for receiver •Operating Temperature : up to 55 Degrees centigrade •Fastening Modes : Back Slot with adjustable height •Cross Section : 36 x 42 mm •Applicable to : Directly work with PLCs Controllers •Suitable for : Machines with quick emergency stop Application: Power Presses for Metal, Processing machines for Wood, Plastics, Leather, Rubber, Glass etc., Filter Presses, Folding or bending machines, Robots, Processing Lines and Welding Presses, Insertion Machines, Palletizers, Handling & Storage systems, Rubber molding machines, SPMs, Forging Presses

Infra systems offers new generation Safety Light Curtains Safety Guards based on advanced micro controller technology. These are available in two types. Parallel Beam , and Cross Beam For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area. Power Supply : 12 - 24 Volts DC Supply Protection : Reverse Polarity Protected Output : PNP or NPN NO or NC Output Indications : Through LEDs channel Indication : LED indication for each channel Response Time : On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec No of beams : 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64 Beam By Pass : Provided in handbody protection models Protected Heights : 90 - 2000 mm Pitch offered : 11, 20, 30,40, 50, 90mm Adjustable Range : Up to 3 meters (Higher range up to 40 meters available) Standard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : Up to 55 Degrees centigrade Cross Section : 36 x 42 mm Electrical Connections : Plug in Connector for Emitter & Receiver Applicable to : Directly work with PLCs Controllers Protections : Output short circuit protected. Vibration Resistance : Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave min Operating ambient Light : 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees Suitable for : Machines with quick emergency stop

Infra system offers safety light curtains 2. Outputs model are available. Which available in following three main categories: 1. Hand protection 2. Finger protection 3. Body protection part of body . Parallel beam and cross beam :- type model from ht. 90mm to 1500mm. Inbuilt controller facility :- where supply of the sensor is 24V and can directly connected to PLC. Controller:- are available with supply voltage 230V AV, in wall mounting , panel and DIN rail mounting. Self-checking facility:- provided for internal checking of the circuit for better operation . Multiple LED indications :- provided for operator to better understand the working . Applications: power presses, molding machines, robots, welding presses, bending machines, and SPMs for operator’s safety while working . For objects height detection . Bin sensor for assembly line. Specifications: Output : PNP or NPN , pitch offered : 20,30,40,50,90 mm. Adjustable Range : upto 15 mtrs, sensor voltage 24 volts DC, connections through plug-in connectors.

Proximity Switches is served as a basic block of automation.We are proximity switches manufacturer and supplier offering sensing solutions for all applications.They are widely appreciated for their easy installation, durability, excellent resistance properties and high insulation. Our proximity switches have a long shelf life. These switches are used in all areas of automotive technology. This range is offered in inductive cylindrical type. The technical specifications of this range are the following: •Supply : 230 VAC •Voltage O P : Relay Output No and NC Infra Systems offers Inductive proximity switches for sensing ferrous material. These are used for automation. Specifications: • Brand: INFRA SYSTEMS • Model No: DC Models , AC Models • Diameter : 060812183036mm • Length : 65mm • Range : 11458101520 mm • Type : Flush and Non Flush • Output : PNP NPN and NO NC • Housing : Plated Brass • Supply : 10 - 30V DC Used For : Counting Position Sensing of various objects in Bulk Material handling, Automobile, Steel Plants. Detailed Description Inductive Proximity Switch AC Models specifications, Diameter 12183036mm Length 65mm Range 24581015mm Type Flush and Non Flush Output Solid State Housing Plated Brass Supply 90 - 230V AC

Power Supply : 12 - 24 Volts DC Supply Protection : Reverse Polarity Protected Output : PNP or NPN NO or NC Output Indications : Through LEDs channel Indication : LED indication for each channel Response Time : On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec No of beams : 4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64 Beam By Pass : Provided in handbody protection models Protected Heights : 90 - 2000 mm Pitch offered : 11, 20, 30,40, 50, 90mm Adjustable Range : Up to 3 meters (Higher range up to 40 meters available) Standard Cable length : 5 meters for emitter, 3 meters for receiver Operating Temperature : Up to 55 Degrees centigrade Cross Section : 36 x 42 mm Electrical Connections : Plug in Connector for Emitter & Receiver Applicable to : Directly work with PLCs Controllers Protections : Output short circuit protected. Vibration Resistance : Amplitude : 0.75 mm (p) Freq : 10 - 55 Hzs, Rate : 1 Octave min Operating ambient Light : 500 Lux ( max.) when source is places opposite to receiver, > 3000 lux when source placed at an angle of 20 degrees Suitable for : Machines with quick emergency stop APPLICATIONS Safety Light Curatins are used for preventing of hand Finger body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Precessing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPM's, Forging Presses, Injection Molding machines etc,

We are a leading Manufacturer & Supplier of Diffused Scan Sensors such as Cylindrical 12 Mm Diffused Scan Sensor, Cylindrical 18 Mm -100mm Diffused Scan Sensors, Cylindrical 18 Mm -300mm Diffused Scan Sensors, Cylindrical 18 Mm -500mm Diffused Scan Sensors, Cylindrical 18 Mm - 4 Wire Diffused Scan Sensors, Cylindrical 18mm - 220v AC Diffused Scan Sensors and many more items from India. Cylindrical 12 Mm Diffused Scan Sensor The Product Specifications Power Supply :10 - 30 Volts DC Output:PNP or NPN and NO or NC Output Indications:Through LEDs Range :100mm Current:200mA Housing:Plated Brass Sensitivity adjustment: Provided Dimension :18 D x 65 L mm Cylindrical 18 Mm -100mm,500mm Diffused Scan Sensors