Lab Incubator Dealers in Nashik

Product Description     This Lab B.O.D Incubators, GMP Model is made under GMP guidelines & as per GMP Rules used for all pharmaceutical Co & Microbiology Dept Etc. Technical Specifications:     Double walled construction outer S.S304 dull Finish Inner S.S316 Mirror polished PUF insulation between two walled Full acrylic door permit inspection of specimen’s with out disturbing the temp Temp Controlled by PID Controller with auto tuning facility with accuracy of ±0.5 C .temp Range 5 C to 60 C accuracy ±0.5 C Illumination light are provided for viewing CFC free hermetically sealed compressor provide temp for below ambient condition Air circulation fan for marinating temp uniformity through out the chamber The chamber is provided with modular removable shelves made of S. S. for complete flexibility in use. To work on 230 volts 50 H2     Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller     Safety Care : Built in temp deviation audio visual alarm. Safety thermostat for over shoot temp. Cut off system HRC fuses for compressor heater & main, time delay circuit for safety of compressor.     This B.O.D. Is Available in Below Sizes:

• Material: Mild Steel
• Voltage: 220V
• Frequency: 50Hz
• Automation Grade: Fully Automatic
• Model: CBba1.25
• Temperature Range: 10 Degree Above Ambient Temperature to 60 Degree C
• Accuracy: ± 0.2 Degree C
• Uniformity: ± 1 Degree C

Equipment : PLC based Bacteriological Incubator (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : PT 100 sensor to sense temperature Software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Standby refrigeration system Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

• Brand Name: Mack
• Warranty: 1 Year
• Temperature Range: 10° C above ambient to 60 °C
• Accuracy: + 0.5°C
• Uniformity: + 1.0°C
• Use in: Laboratory

Features 21 CFR PART-11 Compliance Log data, Event data, Audit Trail data, E-Records &  E-signatures, Graphical analysis & Data acquisition. Optional Features SCANNER GSM TECHNOLOGY HOOTER SYSTEM EXTRA TRAY

We are engaged in the production of different types of Laboratory Incubators. Different types of incubators offered by us are Laboratory Incubator and Platelet Incubator. These Laboratory Incubators are widely used in laboratories for ensuring accuracy in various research activities. We make available these Laboratory Incubators at market leading prices.

• Material: ABS
• Voltage: 220 V
• Brand: Fortuna
• Usage/Application: Laboratory
• Model Name/Number: FDBI20
• Temperature Range: 5 to 75 degree celsius
• Number Of Shelves: 2 Shelves
• Air Flow: 100 CFM
• Warranty: 1 Year

We are one of the foremost Importers and Suppliers of BOD Incubator from Nashik, Maharashtra. The BOD Incubator, we offer, has been catering to the needs of many for biological oxygen demand determination and many other applications. Customers, from around the country, have appreciated the products that we dole out for their sturdiness, dependable operation, and low maintenance. And quality of these products is another aspect by which we swear.    Technical Specifications : Double walled cabinet mounted on castor wheels Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated Full Length inner acrylic door permit inspection of specimens with out disturbing the Temp Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch CFC Free hermetically sealed compressor provide temp. For below ambient condition Air circulation fan for maintain Temp. Uniformity through out the chamber Flush fitting insulated double walled door The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use To work on 230 volts 50 H2 Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller. Safety Features : Built in Temp Deviation Audio visual alarm, Safety thermostat for overshoot Temp. Cut off system. HRC Fuses for compressor heater & mains Time daily circuit for safety of compressor. Special Care : A suitable K V. A. Servo stabilizer is strongly recommended.

• Material: SS, ABS
• Voltage: 220 V
• Frequency: 50 Hz
• Usage/Application: Hospital
• Ample Power: 3 Hour Battery Backup
• Oxygen Cylinder Capacity: 5 L
• Number Of Wheel: 04

• Temperature Range: 10° C above ambient to 60 °C
• Accuracy: + 0.5 °C
• Uniformity: + 1.0 °C

Features:21 CFR PART-11 ComplianceLog data, Event data, Audit Trail data, E-Records &E-signatures, Graphical analysis & Data acquisition.Optional FeaturesSCANNERGSM TECHNOLOGYHOOTER SYSTEMEXTRA TRAY

• Type: Bod Incubator
• Material: Aluminum, Mild Steel
• Certification: ISO Certified
• Application: Industrial Use
• Voltage: 110V, 220V
• Condition: New
• Frequency: 50Hz, 60Hz
• Automation Grade: Fully Automatic

We are one of the noteworthy Manufacturers, Suppliers and Exporters of Platelet Incubator in Mumbai. Platelet Incubator, offered by the company, has unique rack with high ventilation capability to allow oxygen transfer to the platelets. Platelet Incubator also has smooth sliding stainless steel trays which can be removed for cleaning as well as enable easy removal or loading of bags in the tray. Features : Innovative designRobust constructionDurableUser-friendly

• Range: 20°C to 60°C
• Accuracy: ≤+/- 0.2°C
• Uniformity: ≤ +/- 1.0°C*

• Voltage: 110V, 220V
• Condition: New
• Frequency: 50Hz, 60Hz
• Temperature: 0-50Deg C, 100-150Deg C, 50-100Deg C
• Volume: 100-150ltr, 150-200ltr, 250-300ltr, 300-350ltr
• Automation Grade: Fully Automatic

Laboratory Incubator offered by us is used for incubation of organic matter in waste water. Laboratory Incubator designed by us is widely used in laboratories and in different biological activities. Our Laboratory Incubator is compactly designed and has many advanced features to make the incubation process smooth and accurate. These Laboratory Incubators are designed as per the medical standards to meet the requirement. Technical Data Double wall outer body of mild steel with 7 tank process powder coating Inner made of zinc steel Temperature controlled by hydraulic thermostat wit 1 deg. C accuracy Digital temperature Display The Inner Cabinet totally insulated Uniform temperature on all shelves There are two shelves in cabinet Double door with inner glass door

We are offering bod incubator. Technical specification temperature range: 10° c to 60 °c accuracy: + 0.2 °c uniformity: + 1.0 °c features 21 cfr part-11 compliance log data, event data, audit trail data, e-records & e-signatures, graphical analysis & data acquisition. Optional features scanner gsm technology hooter system extra tray

wall to wall carpet flooring, blood bank equipments, Blood Tube Sealer

We are well known for supplying of wide variety of Poultry Incubators.

medical furniture, Scientific Instruments

hatcher poultry appliances, wooden furnitures

Electric Brooder, poultry heating system

electronics systems, Lab Instrument, Lab Chemical, Electronics Instruments

Lab Instrument, Deep Freezers, Binocular Microscopes