Laboratory Chamber Dealers in Sinnar, Nashik

• Warranty: 1 Year
• Brand Name: Make
• Temperature Range: 2° C to 8 °C
• Accuracy: +1.5 °C
• Uniformity: +2.0 °C
• Use in: Laboratory

Features 21 CFR PART-11 Compliance Log data, Event data, Audit Trail data, E-Records & E-signatures, Graphical analysis & Data acquisition. Optional Features SCANNER GSM TECHNOLOGY HOOTER SYSTEM EXTRA TRAY NOTE: MK* :- MK1 / MK2 / MK3 MK**-S :- Split type Condensing Unit MK**- S200CO & MK**- S300CO are Panel & Trolley type (Split Type Condensing Unit)

• Automatic Grade: Automatic
• Power: 1-3kw
• Model: CBp1.25
• Temperature Range: 20 to 60 Degree C
• Accuracy: ± 0.2 Degree C
• Uniformity: ± 1 Degree C

Equipment : PLC based Photostability chamber (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : PT 100 sensor to sense temperature Software : CDAQ complying 21 CFR part 11   Optional features : To avoid critical conditions and for ease of operation Standby refrigeration system Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015 New Feature : A direct access to chamber is possible via mobile using IOT device Illumination for photo : Fluorescent tubes for day light effect and U.V. tubes for ultra-violet rays  Stability test : in accordance to ICH guidelines requirement of lightning Energy Wireless access : A direct access to chamber is possible via mobile using IOT device

• Temperature Range:: 20°C - 60 °C
• Humidity Range:: 40%RH - 95%RH
• Accuracy:: +0.2 °C / +2.0 % RH
• Uniformity:: +1.0 °C / +3.0 % RH
• Test suitable for:: 25°C & 60%RH, 30°C & 65%RH,

Specially designed Chambers for Low Humidity conditions such as 25°C & 40%RH, 40°C & 25%RH, 30°C & 35%RH.   Stability Chambers are used in performing “Stability Studies”. Stability studies provide an evidence on the changes in the quality of product with Time, under the influence of varied environmental factors: Temperature, Humidity.Evaluation of product (API or Formulations) under recommended storage conditions, ( with appropriate tolerances) that test its “Thermal Stability” & if applicable, its sensitivity to moisture.In simple words, Stability can be expressed as: “The capacity of a drug to remain within specifications established, to assure its Integrity, Strength, Quality & Purity”     Features: ConstructionInner Working Chamber is fabricated of “Stainless Steel” (matt finish) & Exterior is of G.I. Powder coated OR stainless steel: sSS304 or SS3016 according to the needs of client or user.The inner working chamber is water & vapour tight high-grade stainless steel. All seams are arc-welded & passivated for strength& durability.Full View Glass DoorSingle Door with a “Viewing Window” (of Toughened Glass) for easy inspection & viewing the samples without disturbing the set environmental conditions of the chamber (by opening the door).IlluminationInner working chamber is provided with a fluorescent tube for illuminating the chamber to view & inspect samples visuallyLeveling Legs“Bullet feet” ensures easy mobility during installation & cleaning. Bullet feet are specially designed for longer life under heavy load with built in screwing adjustment “for accurate horizontal levelling of the chamber).TraysHeavy duty solid stainless steel duly electro polished perforated trays are provided, which are easy to clean, saves time & efforts while cleaning, & also height adjustable for convenience with the help of channels.(Height Adjustable every Half an inch)21 CFR PART-11 ComplianceLog data, Event data, Audit Trail data, E-Records & E-signatures, Graphical analysis& Data acquisition.     Optional Features: STAND BY REFRIGERATION SYSTEMSTAND BY STEAM GENERATOR SYSTEMSCANNERGSM TECHNOLOGYHOOTER SYSTEMEXTRA TRAY  

We are offering photostability chamber. Technical specification temperature range: 20ã�â°c - 50ã�â°c accuracy: + 0.2 ã�â°c uniformity: + 1.0ã�â°c for confirmatory studies, samples should be exposed to light providing an overall illumination of not less than 1.2 million lux hours and an integrated near ultraviolet energy of not less than 200 watt hours square meter to allow direct comparison to be made between drug substance & drug product.

• Power Supply: Single Phase, 230V 50Hz
• Accuracy: + 0.2 °C
• Temperature Range: 20°C - 50°C

Photostability chamber For confirmatory studies, samples should be exposed to light providing an overall illumination of not less than 1.2 million lux hours and an integrated near ultraviolet energy of not less than 200 watt hours square meter to allow direct comparison to be made between drug substance & drug product. UV lights get switched off automatically once the door is opened. You can test the samples on Fluorescent light or U .V lights separately as well as simultaneously. Uniform light distribution & high intensity levels allow quick response for forced degradation testing and confirmatory studies. Lights automatically shut off after a specified exposure level or time duration.

Standard equipment's operating conditions 25°C / 60%RH   30°C / 65%RH   40°C / 75%RH   30°C / 75%RH Standard equipment's operating conditions 25°C / 40%RH   30°C / 35%RH   40°C / 25%RH   Panel Construction Tongue and groove type PUF insulated sandwich panel with cam lock. The Equipment interior is constructed with stainless steel 304 grade finish-4 and exterior is constructed with pre coated GI sheet/ stainless steel 304 grade finish-4. Tray and Rack Duly electro polished stainless steel wire mesh tray and heavy duty square pipe rack with adjustable tray location. Door Heavy duty toughened double glass door installed with imported hinges and lock for easy operation. Backup System Equipment is installed with PLC based auto change over backup system for Refrigeration system and Steam Generator system. PLC based control system Advanced PLC program with built-in Auto-Tuning, PLC Processor based computing and Interactive Easy-to-Use HMI. Documentation • Equipment : DQ, IQ, OQ with PLC Validation, PQ-Conforming to ISPE recommendations, User Manual • Software : IQ, OQ, User Manual

Photostability Chamber, Industrial Autoclave, lab ovens