Low Tension Transformer Dealers in Nashik

We are a well-known name engaged in the manufacturing and supplying Low Tension Transformer. Our Low Tension Transformer is designed in compliance with the industrial standards. It isolates the measuring equipment, relays, and meters, etc. from the in line power supply providing suitable operating current.Type of Construction : Ring / Window Type (tape insulated, epoxy resin cast round / Rectangular window) and with ABS Enclosure Metering & protection applications Secondary current 1 Amps & 5 Amps Primary current generally above 200 A and upto 2500 A Burden & accuracy as per relevant standard and customer requirement   Bar Primary Type : Metering & Protection applications Secondary current 1 Amps & 5 Amps Primary Current generally above 200 A and upto 2500 A Burden & Accuracy as per relevant standard and customer requirement   Wound Primary type : Metering & Protection applications Secondary current 1 Amps & 5 Amps Primary current generally above 200 A and upto 2500 A Burden & accuracy as per relevant standard and customer requirement   Special CTS : Summation CT Inteprosing CT Core Balance CT (CBCT) Split core CT

We offer Lt Transformer.

It is not possible to use line current directly for measurement and relaying purpose due to its high value and insulation problem. CURRENT TRANSFORMER which is widely known as 'CT' is a piece of electrical equipment which converts line current ( primary current ) in to small standard current values which are suitable for the devices to which it is connected e.g. measuring instruments, meters, protection relays.

• System Voltage: 720V maximum
• Ambient temperature: -25°C to +40°C

Current transformers convert an alternating current usually high in to a proportional lower one, depending on their use. Measurement type CTs are required to transform the primary current, at various classes of accuracy, as specified by the class designation, over a current range from 1 to 120 percent of its rated primary ratio. The design of this type of transformer requires the inclusion of a core and winding which will when connected to its rated burden; perform within the limits of error as indicated by the standard’s specification. It is an advantage for a measurement type transformer to saturate above this range, which provides a protection against damage to instruments by limiting the secondary current when surge currents or faults appear in the primary circuit.

Indoor Low Tension Transformers, Metering Cubicle

lt transformers, HT Transformers, Programmable Logic Controller