Optical Sensors Dealers in Nashik

• Material: Stainless Steel
• Model Number: IRB031101201301
• Switching Output: NPN/PNP
• Switching Frequency: 10 to 50 Hz
• Supply Voltage: 10 to 30 V DC
• Special Features: Compact design,Excellent performance,Fine finish
• Setting Method: Potentiometer
• Sensor Type: Emitter
• Response Time: < 500 micro seconds
• Range: 10 m to < 15 m
• Operating Temperature Range: -30 Deg C To +55 Deg C
• Light Source: Infrared Light
• Interface: RS-232
• Housing: Cylindrical Thread M18
• Degree of Protection: IP68
• Contact Output: NC/NO
• Connection: Cable 2 Wire
• Approvals: EAC, Ecolab

Suitable for street light  society. 

• Country of Origin: India
• Type: Solar Street Light, LED Outdoor Light
• Warranty: 1 Year
• Brand Name: Vision Led
• Voltage: 220V
• Water Resistant: Yes
• Shape: Round
• Driven Type: Electric

• Brand Name: JK Electronics
• Housing: Brass Nickel Plated

We are offering through beam sensor. Type : built in amplifire supply : 10 to 24 vdc output : npn or pnp transistor current : 100 ma sens.dist : 3-5 mtr. Status indicator : led. Power pack : for ac mains & rly. Oprn. Dimensions : m 12/18 x 80 l protection : reverse polarity.

• Condition: New
• Range: 200mm - 5000mm
• Supply Voltage: 5-24v
• Opertaing Temperature: -30
• Body Material: PVC
• Performance: Optimum

The system consists of two separate components, a transmitter & receiver. The transmitter emits pulsed light in the infrared wavelength range. The receiver detects the light beam and immediately converts a beam interruption caused by an object in the sensing zone into a switched signal. Features The light only travels one way (from the transmitter to the receiver). Adverse effects in the applications, such as dust in the air, dirt on the lenses, steam or mist do not immediately interfere with the system. A through beam sensor is distinguished by a long range. The characteristics of the sensing zone can be described easily. An object must have at least the size of the optical axis, i.e. the size of the sensing surface or the lens to enable safe detection. Since the transmitted light only travels one way it is very difficult to detect transparent objects. The light beam is not sufficiently interrupted. 

• Power Supply: 110 / 220 VAC
• Output: Relay Change Over
• Contact Rating: 5A at 230 VAC
• Time Delay: If required
• Time Delay: Var.0-30 Sec.
• Sensor Dia: 18/30mm
• Sensor Length: 35mm
• Housing: Brass/ABS
• Controller: 150x120x60 M.S.

• Brand Name: Samrat
• Type: 3 pin connector
• Material: Metal
• Frequency: 1 KHz
• Sensor Type: Inductive
• Sensing Distance: 5-8 mm
• Model Name/Number: IP1234
• Usage/Application: Automation
• Current Rating (In Amps): 300 mA
• Power/Voltage: 10-30 VDC
• Protection Degree: IP67
• Contact Rating: NO/NC
• Voltage Drop: 1.5 VDC

A complete optical proximity sensor includes a light source, and a sensor that detects the light. The light source is supplied because it is usually critical that the light be "tailored" for the light sensor system. The light source generates light of a frequency that the light sensor is best able to detect, and that is not likely to be generated by other nearby sources. Infra-red light is used in most optical sensors. To make the light sensing system more foolproof, most optical proximity sensor light sources pulse the infra-red light on and off at a fixed frequency. The light sensor circuit is designed so that light that is not pulsing at this frequency is rejected.  Optical proximity generally used to detect all types of object. Advantage of optical sensor is they have long sensing range. Optical sensors are divided into three main sub categories :- Diffuse type : Here infra- red light transmitter and receiver are at one end. When any object enters in its field, light is reflected back and detected by receiver giving output. Retro reflective sensor : Here also both transmitter and receiver are at one end. A reflector is placed in front of sensor. Reflector reflects light and any object that breaks light beam is detected and output is activated. Through beam : Here transmitter and receiver are at opposite end. Any object that breaks light beam is detected and output is activated. Laser optical sensors : These sensor uses laser light instead of infra-red light. These are used to detect small object, distance measurement etc.

• Type: Sensors
• Material: Plastic
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Power: 15w
• Warranty: 1year
• Alarm Range: 1.5mtr, 1mtr

We are the main supplier of this product.

• Country of Origin: India
• Type: Safety Sensor
• Material: Metal
• Certification: CE Certified
• Color: Yellow
• Condition: New
• Power: 12-24 VDC
• Packaging Type: Paper Boxes
• Warranty: 1 Year
• Automation Grade: Automatic

We are a leading Manufacturer & Supplier of Diffused Scan Sensors such as Cylindrical 12 Mm Diffused Scan Sensor, Cylindrical 18 Mm -100mm Diffused Scan Sensors, Cylindrical 18 Mm -300mm Diffused Scan Sensors, Cylindrical 18 Mm -500mm Diffused Scan Sensors, Cylindrical 18 Mm - 4 Wire Diffused Scan Sensors, Cylindrical 18mm - 220v AC Diffused Scan Sensors and many more items from India. Cylindrical 12 Mm Diffused Scan Sensor The Product Specifications Power Supply :10 - 30 Volts DC Output:PNP or NPN and NO or NC Output Indications:Through LEDs Range :100mm Current:200mA Housing:Plated Brass Sensitivity adjustment: Provided Dimension :18 D x 65 L mm Cylindrical 18 Mm -100mm,500mm Diffused Scan Sensors

Small Rectangular Through Beam Sensors, Electro Arts Twilight Switch

led light sensor, Lighted Garden Pot, Led Lights, LED Light Fixtures

electrical sensors, Heavy Duty Limit Switch, Magnetic Proximity Switch

Photoelectric Sensor, Anti Collision Device, SENSOR CABEL

Photoelectric Sensors, Digital Counter, electronic safety guards

Photoelectric Sensor, PIR Motion detector, Digital Zero Speed Switch

long range photo sensor, Electric Cables, electric wires

Photoelectric Sensors, Capacitive Proximity Sensors