Position Sensors Dealers in Dwarka, Nashik

• Brand Name: JK Electronics
• Housing: Brass Nickel Plated

We are offering through beam sensor. Type : built in amplifire supply : 10 to 24 vdc output : npn or pnp transistor current : 100 ma sens.dist : 3-5 mtr. Status indicator : led. Power pack : for ac mains & rly. Oprn. Dimensions : m 12/18 x 80 l protection : reverse polarity.

• Output: NPN / PNP Transistor
• Supply: 5-30 VDC or 24 / 110 / 230 VAC
• Current: 200 mA
• Range: 2/ 4 / 8/ 10 / 15/ 25 mm
• Cable Length: 1 to 2 m
• Speed: 1000 / sec. for Dc 1 Hz for AC mode

Principle Of OperationInductive proximity Switches available in Varied shapes size, are a reliable option for applications in Machine tools, Foundries, rolling mils, Automobile, textiles, Pharmaceuticals and Material Handling systems.This type of switches work on ‘Damping’ principle. During operation a frontally radiated electromagnetic oscillating field is projected from the sensing face. Any electrically conductive material entering this field causes damping ofthe oscillations.   This change is detected by the in-built sensitive & reliable electronic circuit and is converted into an effective output signal. Applications For Counting / Position Sensing of various objects in Bulk Material handing Automobile Steel Plants Fertilizer Cement Engineering Industries Sensing Object MaterialThe standard inductive proximity Switches can sense any metallic (electrically conductive) object. However, we have special type of switches to sense either only ferrous objects or sense only non-ferrous sensing switches are describedSensing Zone This switch has a dome shaped electro-magnetic field present in front of the sensing area. The switch will sense the object entering into this domain. Sensing Distance (Sn)This is the distance between the target and the sensing face with the switch operates. This is usually specified considering MS. as target material.Correction FactorTargets other than MS actuate the inductive Switches at relatively less distance with correction factor as given below. However this criteria is not applicable to special “Non-ferrous sensing models”.