Sensors Dealers in Nashik

Infra systems, offers range of Magnetic Float Switches. These are mainly available for Single Level Sensing and Two Level Sensing type. Magnetic Float Switch contacts are SHORT when float is at lowermost level and OPEN when float moves up (towards fixing). This can be used for further interlock for automatic functioning of system. Control Units also offers audio or visual alarms. These are mainly available for Single Level Sensing and Two Level Sensing type. Magnetic Float Switch contacts are SHORT when float is at lowermost level and OPEN when float moves up (towards fixing). As per the level of liquid, float position changes and corresponding output is used for automation Control Unit is also available for automatic functioning of Pump or Feeder with supply 220 volts AC and offers relay output. Relay is ON when level of liquid reaches lower level and gets OFF when level of liquid reaches upper level. This can be used for further interlock for automatic functioning of system. Control Units also offers audio or visual alarms.

• Features: Superior performance, Low maintenance, Optimum finish .
• Usage/Application: Industrial
• Brand: Electronic Switches
• Packaging Type: Box
• Supply Voltage: 12 V DC
• Sensor Range: 100 Inch
• Output Current Max: 2 Amps

• Housing: Acrylic
• Brand Name: JK Electronics

We are offering slot, fork sensors. Supply : 10 to 24 vdc slot width : 20/ 50 mm output : npn or pnp transistor current : 100 ma status indicator : led. Slot depth : 45 mm protection : reverse polarity.

We are offering inductive proximity sensor. Supply : 10 - 30 vdc output : npn/ pnp transistor current : 200 m a sensing : 2/4/8/10/15/25 mm cable length : 2 mtr.

We are a celebrated Electrical Proximity Sensors Manufacturer, Exporter, and Supplier in India. The Electrical Proximity Sensors are available with us in more than 1700 varieties to choose from. Our Electrical Proximity Sensors are the best sensing solution for all applications and are also approved by CMRS Dhanbad for use in hazardous areas. Ask for detailed catalogue with application examples LVDTLinear PotentiometersFiber Optic Sensors form Sick Optex JapanNamur Sensors for Hazardous are applicationEncodersInductive - Capacitive - Photoelectric - Magnetic Proximity SwitchesSpeed Sensors Reverse Rotation Sensor-Monitor

• Country of Origin: India
• Type: Solar Street Light, LED Outdoor Light
• Warranty: 1 Year
• Brand Name: Vision Led
• Voltage: 220V
• Water Resistant: Yes
• Shape: Round
• Driven Type: Electric

• Type: High Temperature Thermocouples
• Material: Stainless Steel
• Length: 2.5mtr, 3.5mtr, 3mtr, 4mtr
• Application: Industries
• Feature: Durable, Quality Tested, Reliable
• Power Source: Electric
• Tenmperature: 0-100 Deg C, 100-200 Deg C, 1000-1100 Deg C, 1100-120 Deg C, 200-300 Deg C, 300-400 Deg C, 400-500 Deg C, 500-600 Deg C, 600-700 Deg C, 700-800 Deg C, 800-900 Deg C, 900-1000 Deg C
• Country of Origin: India

we can supply all types of tempreture sensors with custmised syise as per your requirement

• Type: Resistance Temperature Detectors
• Certification: NPL traceable
• Application: Detecting
• Color: Metallic
• Condition: New
• Warranty: For manufacturing defects. Physical damages not covered under warranty
• Country of Origin: India
• Brand Name: Zircon
• Diameter: 4-8mm
• Theory: RTD
• Output: Resistance
• Size: Dia and length
• Product Name: Pt-100 / Pt-1000

Inductive proximity sensor designed to sense the metalic object. This is the key sensor in any automatic machine. These are widely used for edge , limits, guiding . position , movement sensing in automatic operations. Since the work on magnetic filed principle& are desigend to peform in dusty oily harsh environment. Photon's proximity sensors offer you the relaible performance & longer They are designed invarious sizes & shapes & in certain cases with extended ranges to meet specific requirements. They are available in M4 to M80 dia size in cylindrical standard housing the standard length is 65mm but can be offered in lengths required by customer. Standard model are with 3 core prewired cable. Sensors with connectors of different types are available. Logic can be NO , NC , NO+NC. If you specify the Supply voltage AC or DC Dia of sensor , range,Ouput incase of DC sensor whether PNP or NPN & logic NO or NC. we shall be able to offer you exact model. Since Inductive proximity sensor is brad catageory . Details are must for faster reply.   Applications Automobile Industry Metal Processing Machine Tools Special Purpose Machines Printing And Packaging Food Industry Injection Molding Packaging Industry  

• Country of Origin: India
• Type: Safety Sensor
• Material: Metal
• Certification: CE Certified
• Color: Yellow
• Condition: New
• Power: 12-24 VDC
• Packaging Type: Paper Boxes
• Warranty: 1 Year
• Automation Grade: Automatic

• Brand: Samrat
• Body Material: Plastic
• Usage/Application: Object Detection
• Switching Mode: NO/NC
• Degree of Protection: IP67
• Installation: Flush
• Sensor Type: Diffuse Scan
• Body Style: Cylindrical
• Connection Type: Cable
• Sensing Distance: 300mm
• Number of Wires: 3 Wire
• Supply Voltage: 10 to 30 V DC
• Voltage Drop: 1.5 VDC
• frequency: 1 kHz
• Operating Temperature: -20 Degree C + 50 Degree C

Inductive Proximity Sensors detect magnetic loss due to eddy currents that are generated on a conductive surface by an external magnetic field. An AC magnetic field is generated on the detection coil, and changes in the impedance due to eddy currents generated on a metallic object are detected. A high-frequency magnetic field is generated by coil L in the oscillation circuit. When a target approaches the magnetic field, an induction current (eddy current) flows in the target due to electromagnetic induction. As the target approaches the sensor, the induction current flow increases, which causes the load on the oscillation circuit to increase. Then, oscillation attenuates or stops. The sensor detects this change in the oscillation status with the amplitude detecting circuit, and outputs a detection signal.

• Brand Name: Electronic Switches
• Material: Metal
• Voltage: 230 VAC
• Current: 10-15 A
• Frequency: 50-60 Hz
• Features: Corrosion Resistance, Fine Finish, Extended Durability
• Power Source: Electric

The system consists of two separate components, a transmitter & receiver. The transmitter emits pulsed light in the infrared wavelength range. The receiver detects the light beam and immediately converts a beam interruption caused by an object in the sensing zone into a switched signal. Features The light only travels one way (from the transmitter to the receiver). Adverse effects in the applications, such as dust in the air, dirt on the lenses, steam or mist do not immediately interfere with the system. A through beam sensor is distinguished by a long range. The characteristics of the sensing zone can be described easily. An object must have at least the size of the optical axis, i.e. the size of the sensing surface or the lens to enable safe detection. Since the transmitted light only travels one way it is very difficult to detect transparent objects. The light beam is not sufficiently interrupted. 

We offer sensor connectors m8/m12 male and female. Indias largest manufacturer for sensor connectors m8m12 male and female 3 pin and 4 pin and 5 pin waterproof

• Material: Plastic
• Warranty: 5 Years
• Application: Clinical
• Cleaning Type: Manual
• Feature: 2 in 1 Consultation Tool
• Cable Length: 3 m
• Connector: USB
• Model Name/Number: Ez Sensor Classic 1.5
• Thinnest Sensor: 4.8mm

PIR MOTION SENSOR MODEL: WL-802 Detect Mode: PIR Intruder DetectorFeatures: (indoor) 1,WL-802 Detecting range:10m,detecting angle: 90°;2,WL-802M Detecting range:8m,detecting angle: 15°;3,Working voltage: 9-16VDC,Working current: 18mA;4,alarm output NC / NO optional, adapt to any alarm host;5,a full range of automatic temperature compensation;6,SMT process manufacturing, resistance to the RFI and EMI interference;7,three pulse count can be adjusted to facilitate the installation of different environments;8,LED indicator ON / OFF selectable;9,flame retardant ABS shell with the detector bracket.   Detail Description of PIR MOTION SENSOR Model NO.: WL-802 Detection Type: Photon Detector Production Process: SemiConductor Integrated IP Rating: IP22 Customized: Customized Detection Range: 12m*12m Installation Height: 1.8-2.5m Gurantee: 3 Years Guarantee Installation Mode: Wall Mounted Usage: Anti-Theft Specification: CE, ROHS HS Code: 8531100000 Function Type: Infrared Range and Communication System Output Signal Type: Digital Type Material: Plastic Certification: CE, RoHS, FCC Guarantee: 3 Years Guarantee Working Voltage: 9-16VDC Quality Standard: CE and RoHS Type: Sensor Application: Home, Industry, Communication Electronic Product

We offer highly durable and functional Shutter Sensor from Nashik. Manufactured using the finest quality raw materials and parts, the Shutter Sensor is widely used in shops, garages, etc. to prevent burglary. The Shutter Sensor is thoroughly examined and tested to ensure its functionality and efficiency. Technical Specifications Of Shutter Sensor Color : SilverGap : 40mm – 70mm Features EfficientDurableThoroughly checkedMade from quality raw material

• Type: Sensors
• Material: Plastic
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Power: 15w
• Warranty: 1year
• Alarm Range: 1.5mtr, 1mtr

We are the main supplier of this product.

• Temperature Range: 0-1300 Degree C
• Accuracy: 0.5 Degree C
• Response Time: Less Than 30 Sec
• Connection: Thread

Proximity Switches is served as a basic block of automation.We are proximity switches manufacturer and supplier offering sensing solutions for all applications.They are widely appreciated for their easy installation, durability, excellent resistance properties and high insulation. Our proximity switches have a long shelf life. These switches are used in all areas of automotive technology. This range is offered in inductive cylindrical type. The technical specifications of this range are the following: •Supply : 230 VAC •Voltage O P : Relay Output No and NC Infra Systems offers Inductive proximity switches for sensing ferrous material. These are used for automation. Specifications: • Brand: INFRA SYSTEMS • Model No: DC Models , AC Models • Diameter : 060812183036mm • Length : 65mm • Range : 11458101520 mm • Type : Flush and Non Flush • Output : PNP NPN and NO NC • Housing : Plated Brass • Supply : 10 - 30V DC Used For : Counting Position Sensing of various objects in Bulk Material handling, Automobile, Steel Plants. Detailed Description Inductive Proximity Switch AC Models specifications, Diameter 12183036mm Length 65mm Range 24581015mm Type Flush and Non Flush Output Solid State Housing Plated Brass Supply 90 - 230V AC

Product Description We are engaged in offering a qualitative range of Wind Direction Recorder that continuously records the graphic of the direction of wind. Furthermore, these recorders can easily be connected in parallel along with digital display units and Munro dial indicators.

• Brand Name: Electronic Switches
• Usage/Application: Paper Cutting Machine
• Voltage: 230 Volts AC
• Phase: Single Phase
• Model Name/Number: PCM 04
• Sensor Dimension: 18 D x 35 L mm
• Controller Dimension: 173 x 130 x 45 mm

• Type: Motion Detectors
• Color: Black, White
• Voltage: 110V, 220V
• Application: Motion Detecting, Security And Protection
• Automatic Grade: Automatic, Semi Automatic
• Power Source: Battery, Electric
• Feature: Light Weight, Stable Performance

• Material: Stainless Steel
• Current Consumption: 15mA
• Cable Length: 4m
• Humidity: 95%
• Cable Material: PVC
• Sensor Material: Stainless Steel

We offer Legrand Switches. LEGRAND SWITCHES ARE AVAILABLE

led light sensor, Lighted Garden Pot, Led Lights, LED Light Fixtures

Ph Sensor, grit separator, Complete Hydro Testing Unit