Tig Torch Parts Dealers in Ambad, Nashik

• Type: Vibratory Screen
• Material: Aluminum, Iron, Nickel, Plastic, Stainless Steel
• Application: Industrial
• Color: Black, Grey, Silver
• Feature: Corrosion Resistance, Good Quality, High Performance, Perfect Finish
• Weave Style: Plain Weave, Welded

• Type: Stainless Steel Tig Filler Rod
• Material: Stainless Steel
• Thickness: 0-10mm, 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm
• Length: 1Ft, 2Ft, 3Ft, 4ft, 5Ft
• Application: ACSR, Fencing Gabion, Guy Wire, Stay Wire, Stranded Conductors
• Condition: New, Used
• Surface Finishing: Non Polished, Polished
• Feature: Attractive Design, Durable, Fade-less, Heat Resistance, Non Breakable, Perfect Strength, Rust Proof, Sturdiness

• Material: Fiberglass,PP
• Color: Black
• Weight: 1.02 Kg
• Condition: New
• Auto-darkening: No
• Lens Size: 4 1/4 x 3 1/4 lens
• Packing Type: Box

• Material: Copper
• Number Of Cores: Single
• Ambient Air Temperature: 30 deg C
• Nominal Cross Sectional Area of Conductor: 35 sq mm2
• Nominal Thickness of Covering: 2 mm
• Current Rating: 125 amp( at a Maximum Duty Cycle of 100%)
• Max Temperature of Conductor: 60 deg C

• Nominal Cross-Sectional Area of Conductor: 25 Sq mm2

Mig Tig Co2 Coax Torch Welding cables for general service normal duty elastomeric compound and HOFR for use in the welding industry i.e. namely in Mig Tig Co2 Coax welding equipments. We manufacture cables from 16 Sq.mm to 95 Sq.mm.Covering : The general service normal duty elastomeric compound shall be Type SE 1 confirming to the requirements of IS 6380:1984. The heat resisting, oil resisting normal duty elastomeric compound shall be Type SE 3 confirming to the requirements of IS 6380: 1984.

A completely revamped product design for Servo Motor Guns. Modern and novel design, minimum parts and ease of maintenance. Possibility to integrate a built-in force sensor for closed loop force feedback are the highlights of this generation. MAIN FEATURES Design - TECNA Robot guns are designed as per European standards. The unique design can accommodate motor from any robot manufacturer. The compactness, user friendliness and maintainability of Tecna manual guns is earned forward to Robot guns design too. Every part or subassembly of the gun is subjected to life cycle test before accommodating into the product. Modular design enables standard parts for all guns. Product Range - As per TECNA's philosophy of optimisation ,AC robot guns are available in 32 KVA, 36 KVA, 54 KVA, 60 KVA, 75 KVA. MFDC guns are available in 56 KVA and 90 KVA. Increase in productivity - The electrode opening can be precisely controlled and travel distance between the spots can be reduced. This results in reduced spotting and traveling time. The electrode opening position can be defined for each spot reducing the opening and closing time of electrodes resulting in reduced spotting time Precise control on Welding Force - As The welding force is controlled by Current utilized by servo motor, actual force while welding can be controlled precisely. Welding force for each spot can be programmed as per welding requirement of different combination of sheets to be welded. Inbuilt Force Transducer - To receive real time feedback of Force while welding is also available as option. This is achieved by integrating a Force Transducer built inside the gun mechanism. Precise control on Heat Generated ( Energy Consumed) while welding - Three important parameters of welding are Current, Time and Resistance. With TECNA constant current secondary feedback Welding Control, Current and time are precisely monitored. The contact resistance is dependant on actual force applied while welding. Servo system controls the force accurately resulting in generating required Heat for welding. Soft Closing - Electrode Closing speed is reduced just before they touch the panel. This results in reduced Dents and increase in electrode life as initial impact of electrodes is avoided. Correct welding position - This servo system can identify Tip wear, Deflection in arms and tip position. This helps for correct welding position of the gun. Environment Friendly - Operational noise of welding gun is reduced by soft closing also they don't produce air exhaust noise. Conversation with robot - For the convenience of Integrator and robot manufacturer this system is available with various fieldbus options. Interface modules for fieldbus DeviceNet, Profibus, Ethercat are available as standard, ensuring compatibility of communication protocol with wide range of Robots. After Sales - USP of Tecna in INDIA is after sales and service support. This continues with regional offices with adequate spares. Options Available As a standard Tecna robot guns are supplied with Robot make motor reducing hassles to customer. Option of Tecna Motor is also available. As a standard Tecna robot guns are supplied with AC Constant current secondary feedback controller. Option of MFDC control and transformer is also available As a standard Tecna robot guns are supplied with Copper arms. Option for Aluminum arms is also available. Tecna Robot Guns are also available with Pneumatic and servo pneumatic systems.

Welding Accessories are equally important in the field of Welding as the Welding Consumables. Hence, to make a one-stop-shop for all your Welding Requirements, we manufacture and trade in the following Welding Accessories.

  TECHNICAL SPECIFICATIONS :   Marsman Vibrating screens are designed and manufactured with modern  technology on highly sophisticated machines and equipments to produce maximum output with minimum screening area and power  consumption.   SALIENT FEATURES :   Excellent  accuracy for separation Maintenance free. Minimum wear rate per ton. Perfect gradation of material. Minimum Power Required SCREEN DETAILS “MARSMAN” vibrating screens  are designed to make separation / filtration of crushed  material from fine dust to oversized. The screen frame, a bolted & welded steel structure, accommodates  the screen mesh & the drive unit. The screen is designed by the assembly of an eccentric shaft,  made out of alloy steel & two no. of heavy duty  double  spherical bearings  with dust & water tights seals for efficient operations & low maintenance.   The MARSMAN screens  are driven  by electric  motor provided with the screen. The screen frame rests flexible on four spring units provided on support  construction, so as the eliminate jerks to the supporting systems  and to vibrate  freely in a linear motion.   The angle of the throw  screening action is adjusted  with such design that it provides the same vibration to all parts of the screen in order to obtain proper filtration/ screening of crushed material  of different sizes simultaneously while separating  oversized product.   The action of  ‘MARSMAN’ vibrating screen is independent  of burden of material. This is considered to be most salient features  which results  in a very high ratio of through  output per unit  of screen area.   “MARSMAN” vibrating  screen are available  in different  models and sizes with different  capacities to suit the requirement of individual customers.

• Tensile Strength: 120 N/mm2

Aluminum wires and rods for welding alloys with maximum 2% alloying elements and for aluminum alloys containing upto 7% of Si. Excellent flow ability and penetration characteristics. Applications in the construction sector and in the automotive industry

Vibrating screen are used to separate materials into various sizes for further processing. Or for end use. Depending on your need. Rd screens for scalping, separating and sizing aggregates, minerals and coal come in several different types and a wide range of sizes. Products include robust vibrating grizzlies and scalpers, and inclined screens. We offer individual units and complete systems, as well as expert advice on choosing the right screen for the job. Powerful circular motion high screening efficiency smooth starting and quite operation suitable for skid or mobile mounting versatile application economic installation easy maintenance and operation compact and robust design world class product quality technical specification:- screen size deck shaft rpm motor h.p. capacity tnhr feet meter 8’x4’ 2.4x1.2 2-4 960 5 12 – 15 10’x4’ 3x1.2 2-5 960 5 18 – 24 12’x4’ 3.6x1.2 2-6 960 10 35 – 40 12’x5’ 3.6x1.5 2-7 960 12.5 45 – 50 14’x5’ 4.2x1.5 2-8 960 15 75 – 95 16’x5’ 4.8x1.5 2-9 960 15 125 – 150 18’x5 5.4x1.5 2-10 960 20 150 - 175 20’x5’ 6x1.5 2-11 960 2025 175 - 250

Compact desing. Light and flexible cable assemblies for all common TIG Welding power sources. ABITIG 200MT/300W MT with pre - adjustable tungsten electoride. Especially suitable for welds at components with simple geometries.

• Packaging: PS-100 Passive Welding Shield
• Brand Name: 3M
• Model Number: PS 100
• Usage: Industrial
• Material: HDPE
• Type: auto darkening
• Color: BLACK
• Weight: 425 Gram
• Automation Grade: Automatic
• Minimum Order Quantity: 5 Number

Projection welding is a resistance welding process. Projections are made on any one of the components before welding. We manufacture Projection Welding Sleeve Parts, which is made with precise accuracy. These sleeve Parts are also widely demanded in the national and international markets and are cost-effective.

We are Listed At the Apex as the Most Distinguished Welding Machines Manufacturer in India. Customers from Every Nook and Corner of India are Placing Huge and Repeated Orders for the Pvc Welding Machines Due to High Durability and Low Maintenance Cost. Moreover, the Notable Features of High Frequency Pvc Welding Machines like Unmatched Quality and Unbeatable Performance I.e. Flawless Welding of Pvc Tubes have also Played a Vital Role in the Enhancement of the Demand. Customers are also Facilitated with the Availability of the Pvc Welding Machines At the Most Reasonable Prices.

• Type: Digital Welding Machinery
• Certification: ISO 9001:2008
• Voltage: 150-220V
• Condition: New
• Operating Type: Automatic
• Rated Power: 1-3kw, 110V, 220V, 3-6kw
• Warranty: 1year
• Processing Type: AUTOMATIC, MANUALY AUTOMATIC, SEMI AUTOMATIC

We are offering vibratory screen. The vibratory screen is also known by several other names such as the vibro screen, seprexin is a well known name for vibratory screening where the emphasis is more on quality rather than capacity. vibro screen is based on the 3d gryrator motion- two sided eccentric weights are mounted on top and bottom of extended shaft of vibratory motor. The eccentricity of the weights creates vibratory motion. The materials for processing on the shaft will now begin to rotate in clockwise and anti-clockwise direction offering an excellent vibrating screen for various capacities.

Cable Type Spot Welding Guns, Multi Spot Welder for 12 Spots

Portable Spot Welding Gun, Cables

Gas Cooled Welding Torch, Heat Resistant Gloves, Orange Reusable Ear Plug

Tungsten Copper Contact Tips, Tungsten Carbide, Cutting Tool Inserts

tig torch, Stud Type Welding Machine

Welding Electrodes, aluminum welding machine, Co2 Mig Wires

nozzle gel, Emery Powder, beard cover, Buffing Compound, Leather Sleeve

EF Welding Tools, Electrofusion Fittings, Compression Fittings

Welding Electrodes, Mild Steel

Ball Screw

Vibrating Screen, Crushing Plant, CRUSHING & SCREENING PLANT, Stone Crusher

Welding Electrodes, industrial electric power tools

Vibrating Screens, Conveyors, feeders, Hoppers, Impact Crusher

Vibrating Screens, earth moving compactors, feeders, Impact Crushers