AC Drive Control System Dealers in Kopar Khairane, Navi Mumbai

• Features: High efficiency , Long functional life , Easy to use
• Item Code: A-701

We manufacture & design all types of the HMI Control Panelsas per the design or customer requiremnts

In a large solar photovoltaic (PV) array, multiple solar modules are connected in series in a string to build the voltage up to proper levels for the inverter. Multiple strings of solar modules are then combined together in parallel to multiply the string output currents to higher levels for input into the inverter. The combiner box is a device that combines the output of multiple strings of PV modules for connection to the inverter. It is typically used in the larger commercial and utility scale PV power plants. The combiner box commonly houses the input overcurrent protection fuse assemblies for several strings, as well as the combined bus of those inputs into a single main output. Combiner box may also house several other components for the site, such as a DC disconnect, surge protective devices(SPD) and, in some cases, string monitoring hardware for SCADA system.

• Automation Grade: Semi-Automatic
• Material: steel
• Power Source: Electric
• Voltage (V): 220
• Power (Kw): 5
• Frequency (Hz): 50
• IP Type: IP45
• Surface Treatment: Polished

• Features: Highly cost competitive & reliable in quality, Compartmentalized or non compartmentalized
• Types of Starter: Direct On-Line Starter
• IP Rating: IP52 for indoor application, IP 55 for outdoor application

We are a quality centric company and have established a modern warehouse that is equipped with an up-to-the-minute inventory control system. This has helped us in maintaining the quality of the products for a longer time. Buy the best quality Industrial Starter Panel at market leading prices, from us. We are amid the prominent Suppliers in the town. Industrial Starter Control Panels have a smooth and polished surface with a lightweight body.  

In industry, most of the load is inductive in nature which results in lagging power factor that is why there are loss and wastage of energy which results in high power bills and heavy penalties from electricity boards. If the load is uneven it is very difficult to maintain unity power factor. To overcome this difficulty apfc panel is used which maintains unity p.f. Features and applications : 1) high speed power factor correcting system is designed to compensate the reactive power of any load or equipment required p.f. Correction within one cycle of operating frequency or time delay of 30 sec to 5 min after command signal from apfc controller. 2) renders the distribution network more stable since there is no contactor switching causing high voltage transients, spikes, harmonics and other disturbances by applying zero crosses over voltage switching on and zero current switch off of the capacitors. 3) prevents voltage drop and flickering reduces failures in highly sophisticated electronic equipment like plcs. Computers and other control systems. 4) helps in reducing maximum demand and rkvah consumption hence a substantial reduction in monthly electricity tariffs. 5) it is highly suitable for spot welding applications where the reactive energy is to be compensated for a short period of 200 msec or less and for a number of times in a second. 6) accurate power factor control even in the presence of harmonics.

• Weight: 1000-2000kg
• Voltage: 380V
• Automatic Grade: Automatic
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1 Year

The Electric Solar Panels that we offer are extensively used to convert the sunlight into electricity. These Solar Panels are made using high-grade components and appreciated for durability and corrosion resistance. Solar Panels that we offer are used for providing electricity to various sectors like residential, commercial, industrial, etc. Our Solar Panels are highly energy efficient and available at very affordable rates.

We are offering ac servo system. Extremely quick response time, highly precise, energy efficient, low vibration & noise, smooth running with accurate torque, customized programming, entire set

• Application: Office, Restaurant, Railway station
• Color: Black
• Driven Type: Electric
• Warranty: 2years
• Fingerprint capacity: 100000
• Reading Distance: 1 meter

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

Pneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control Panel

• Phase: Single Phase
• Power: 1100 W
• Color: White
• Material: Mosaic Mimic Panel
• Usage/Application: Industrial
• Brand Name: Tan Swa

Our Mozaic Mimic also called  Mosaic Mimic panels are in services in your region for many years.Not only in your region but also they are operational ingujrat, maharashtra, m. P. Rajasthan and various cities such as mumbai, navi mumbai, midc dombivali, kalyan, ambernath, thane, pune, mahad, ttc mumbai, roha, goa, bangalore, delhi & also export to australia, austria, bangaladesh, brazil, china congo, dubai, indonesia, iran, israel, nigeria, oman, portugal, qatar, russia, saudi arabia, sharjah, singapore, south africa, sri lanka usa, vietnam, yemen and zambia in various places in the world.For Industrial Process Application.  Additional Information: Pay Mode Terms: Other

With the support of our competent procurement teams, we source and export a quality range of Electrical Panels. Using advanced and modern technology, these panels are manufactured from high quality factor inputs under the supervision of our experienced team of professionals. To get maximum satisfactions of our clients, our offered panels are tested with all quality parameters of the international standards. These panels are highly useful to avoid short circuit or overload. Apart from this, our offered panels are widely appreciated for their excellent features like durability, sturdy construction and reliability. With the help of our professionals, Dewdry Industries is capable in offering an exclusive array of Dehumidifier Control Panel. Offered panels are designed & developed by the experts in complete compliance with the international quality standards. Apart from this, these panels are strongly constructed to prevent damages and all useless electrical defaults. Available with us in various designs, these panels are highly known for their durability and sturdy construction. We offer these panels at effective rates. Features: Excellent performance Durable Low power consumption

Features : Highly safe and Reliable Tailored Control using DOL Starter / Star-Delta starter /VFD High performance & low maintenance Sturdy Construction with sufficient cable space for providing connections Easy Operation Description : Motor Control Centre (MCC) Panel is the modern amalgamation of motor starters which usually consist of feeders for pumps, motors & blowers. We manufacture high quality MCC panels depending upon the application it is going to serve or as per client’s specifications. Feeders are always designed on the basis of motor ratings (kW/HP) & the protection that the motor requires. We provide MCC panels with auto/manual/remote provision, so controlling them becomes easy as the situation demands. Used In:   Automobile Industries Textile Industries Cement Plants Chemical Plants Pharmaceutical Plants Sewage plants Hydropower Plants

Along with high level of skilled designers & programmers we also lead with high level of skill fabricators to achieve some of the most complex CONTROL DESK to suit our customer’s requirement.   Features :- Available in Floor mounting type. Degree of Protection :-IP-52 to IP-65. Painting: - Powder Coating, Spray Paint, Epoxy Paint. Compartmentalized design. Designed to accept 3-phase, 4 wire input volt. Provided with buzzer & hooter during emergency. Provided with 12/24 window annunciator for fault indication.    Application :-   These are widely used for :- »  Control & monitoring of various electrical motors, loads etc. of an electrical system. »  Protect against various electrical faults. »  Better & smooth trouble free electrical life of various electrical machines. »  Control Desk may save energy of an electrical system.

Type tested to conform to leading Global Product Standards. (IEC-61439-1 & 2). Fully Compartmentalized (Form IV) Design. Drawout modules are simply pushed in for withdrawal, ensuring smooth & tool-less operation. Drawout modules plug-in directly on to Vertical Bus Bar, minimizing maintenance issues. Vertical Bus is Joint-free along the feeder area, therefore is highly reliable. Safety shroudshutter providing IP 20 levels of segregation upon withdrawal. Shock-free operation with Double Stab-in earthing in all Drawout modules. Fully Bolted Modular Structural design. Drawout Modules have interlocks for Test, Service & Isolated positions. Drawout Modules available in 3 Pole for Starter feeders & 4 Pole for Power feeders.