Aeroflex Industries Limited Taloja, Navi Mumbai, Maharashtra

Stainless steel corrugated flexible hoses are offered from 6mm (1/4’) to 300 mm (12’). The annular corrugated hose body provides the flexibility and pressure tight core of the assembly. Lance Hoses An import subsitute product, developed and manufactured by us.These hoses distinguish themselves due to their good performance in adverse and hostile conditions. These ultrasonically cleaned and degreased hoses are pressure sealed, leak proof under vacuum condition and can be used with or without inside interlocked liner. We have supplied Water and Oxygen Lance Hoses to Steel Plants (Tisco, Rourkela, Vishakhapatnam, Bhilai & Bokaro). Advantages of Flexible Metal Hose  Suitable for wide temperature range (-270°C to700°C). Compensates for thermal expansion contraction in the piping system.  High physical strength. Fire resistant. Moisture resistant.  Longer life. Good corrosion characteristics. Resistant to abrasion, penetration and damage. Connects misaligned rigid piping absorbs or dampens vibration and similar equipments.  A flexible and quick option for rigid piping in difficult locations.  

aeroflex hose assemblies are engineered to perfection in flexibility, strength and reliability. Aeroflex industries can provide a corrugated stainless steel hose assembly that will meet your most demanding technical specification. We can supply the hose complete with any type of end connections in various types of materials. The end connections are tig welded to hose. hose assemblies can be supplied under any third party inspection. 

Unbraided corrugated hoses tend to elongate when pressurised above a certain level. To restrain this, an external layer of stainless steel wire braiding is provided on the hose. Braiding prevents longitudinal expansion of corrugated hose and thus increases the internal pressure strength of the hose many fold. Braiding is highly flexible and exactly follows the movements of the hose. To increase the pressure ratings further, two or even three layers of braiding are provided. Unless specified, braiding in high tensile stainless steel AISI 304 wire, will be supplied.

Unbraided corrugated hoses tend to elongate when pressurised above a certain level. To restrain this, an external layer of stainless steel wire braiding is provided on the hose. Braiding prevents longitudinal expansion of corrugated hose and thus increases the internal pressure strength of the hose many fold. Braiding is highly flexible and exactly follows the movements of the hose. To increase the pressure ratings further, two or even three layers of braiding are provided. Unless specified, braiding in high tensile stainless steel AISI 304 wire, will be supplied. Braiding can also be supplied in copper, tinned copper or stainless steel AISI 316 in case of bulk requirements.

High pressure and extra high pressure hose. Hoses providing continous conductive path to the metal end fittings to bleed static electricity. Requirement of technical drawing or query. TFE(P) lined hose assembly fitting to fitting. unlimited against all chemicals, acids and caustic solutions of any concentrations. Liquid alkali, metals and fluoride compounds.

For many years Aeroflex has combined technologies of metal hose with expansion joints into composite assemblies to perform in special applications. When an unusual or a difficult problem needs to be solved, Aeroflex Engineering can create a solution for the same. Some examples are shown below. Large diameter metal hose are frequently the only practical transfer hose for various chemicals, particaularly if elevated temperatures are included. Need even more flexibility? Aeroflex Engineering can vary core widths, height and metal guage to provide a custom hose based on your design requirements. Consult factory for details. Jacketed Assembly   When conveyants must be maintained at a specified tempurature steam jacketing is used frequently, often in lieu of electric tracing.     Guarded Assembly   Use of external flexible armour protects metal hose from abuse due to rough handling, abrasion and bending below it's limits. Often a rubber cover can accomplish this as well as armour if temperatures will permit.     Line Assembly   If high conveyant velocities are requried, use of a internal flexible metal liner will prevent damage and reduce abrasion problems

Hose Type : Aeroflex / TFE (P)       Construction : TFE(P) smooth tube externally S.S. 304 Braided       What are the advantages TFE(P) hoses can offer       Chemical Resistance :  unlimited against all chemicals, acids and caustic solutions of any concentrations. Exceptions :  Liquid alkali, metals and fluoride compounds. Temperature Resistance :  -73° C to + 260° C maximum Weather Resistance :  ozone and UV ray do not cause any material change. Ageing Resistance :  practically unlimited, non-inflammable. Difussion Resistance : favourable permeability behaviour. Food Suitablility : physiologically unobjectionable, no transfer of taste or color. Heat Expansion Coefficient : linear, higher than steel. These properties mean : low maintanence cost during long service life.     less production standstill.     reduced storage requirements due to multiple application.     more flexibility in disposition by multiple combination possibilities.       Hose specification Tolerance : +/- 5% End Connection : can be manufactured as per requirement.       Consult our technical department for   High pressure and extra high pressure hose. Hoses providing continous conductive path to the metal end fittings to bleed static electricity. Requirement of technical drawing or query. TFE(P) lined hose assembly fitting to fitting.    

Special Assemblies Hose technologies of metal hose with expansion joints into composite assemblies to perform in special applications. When an unusual or a difficult problem needs to be solved, Aeroflex Engineering can create a solution for the same. Some examples are shown below.

Stainless steel corrugated flexible hoses are offered from 6mm (14’) to 300 mm (12’). The annular corrugated hose body provides the flexibility and pressure tight core of the assembly. An import subsitute product, developed and manufactured by us.These hoses distinguish themselves due to their good performance in adverse and hostile conditions.

hydro-forming technology indigenously for production of single as well as multi-ply construction bellows in comparison to mechanical forming used by most other manufacturers. The hydro-forming technology based bellows have OMEGA W shaped corrugations with zero work hardening and wall thinning. This results in better flexibility and longer life. RDD (Research, Design and Development) has been the work culture followed at Aeroflex Industries since beginning. This is why Aeroflex Industries products are accepted in first place by users.

Standared exceutions for Aeroflex annular corrugated S.S.Hose and *Teflon HoseThe fitting are available in Mild Steel, Carbon Steel, Stainless Steel, Brass, Gun Metal, Rolled bronze. Flange connection with fixed & floating flanges to meet IS, DIN, ANSI* ASA standards or as per customer's specification.  

Stainless steel corrugated flexible hoses are offered from 6mm (14’) to 300 mm (12’). The annular corrugated hose body provides the flexibility and pressure tight core of the assembly. An import subsitute product, developed and manufactured by us.These hoses distinguish themselves due to their good performance in adverse and hostile conditions. These ultrasonically cleaned and degreased hoses are pressure sealed, leak proof under vacuum condition and can be used with or without inside interlocked liner.

High pressure and extra high pressure hose. Hoses providing continous conductive path to the metal end fittings to bleed static electricity. Requirement of technical drawing or query. TFE(C) lined hose assembly fitting to fitting. Hoses for various types of steam Application. Transfer hose for chemicals, hot spray, paint, adhesives aerosol etc.

Aeroflex quick connecting couplings conserve energy and are easy to connect / disconnect without the use of hand tools, for thousands of purposes where products are transfered by pipe or hoses, like Brewing, Chemical, Mining, Fertilizer, Petroleum, Steel Plants, Power Plant and Pneumatic Tools. 

Hydro Forming Manufacturing TechnologyAeroflex Industries designed and developed hydro-forming technology indigenously for production of single as well as multi-ply construction bellows in comparison to mechanical forming used by most other manufacturers. The hydro-forming technology based bellows have OMEGA W shaped corrugations with zero work hardening and wall thinning. This results in better flexibility and longer life.RDD (Research, Design and Development) has been the work culture followed at Aeroflex Industries since beginning. This is why Aeroflex Industries products are accepted in first place by users.Most of production activities at Aeroflex Industries are conducted on automatic production machines to ensure consistency in quality and enhance productivitiy. Only tested materials are used for all product components. Absorption of vibrations & Compensation for thermal expansion     Made from high temperature and corrosion resistant materials.     Double ply construction of Bellows.   (Single ply or 3-Ply can be supplied on specific orders).     Leak proof, tested products.     Being flexible enough, can be easily fixed in position during installation.     Closely knit wire braid gives more strength and protection to Bellow membrane.     Made with Aluminized steel end caps.   (Stainless steel caps also available on specific orders).     Connectors with inner braid sleeve, Interlock sleeve (liner) also available.