Industrial Air Conditioning System Dealers in Ttc Industrial Area, Navi Mumbai

GANDHI ENGINEERING CO An ISO 9001-2008 company manufacture high sealing Efficiency Dampers (Sealing Exceed 99.99%)In Circular, Rectangular &Multilovers Guillotine,divertor etc .Various Blade opening types like Parallel Blade, Opposed blade, Butterfly valve type, single blade, wing blade, Poppet type &Slide gate type, Dampers are available to suite various service application. Materials of construction for Dampers Are varying from carbon steel to stainless steels in various grades, High Ni alloys etc

• Configuration: Application specific sizes
• Performance: Cooling is application specific
• Operating Temperature (C): Application specific, typically -54° to +71° C

Developed by Parker Hannifin’s Gas Turbine Division, the unique macrolaminate construction employs a diffusion-bonding manufacturing process. This process allows multiple layers of extremely thin material to be bonded together, resulting in a finished product that has a material strength greater than 90 percent of the base material. Each layer may contain complex liquid paths that transport the coolant to specific areas of concentrated heat flux. This multilayer approach results in the ability to create parallel “low temperature” flow paths for the coolant prior to reaching multiple locations of the specific heat sources. The unique manufacturing process includes the capacity to produce fluid channel passages with extremely high aspect ratios. A “slot” style fluid channel provides the most efficient method of thermal transfer (maximum contact area versus volume) from the cold plate wall to the coolant. Thin cold plates and low-fluid volumes result in reduced sizes for any associated pumps or reservoiraccumulators in the overall system, contributing towards size, weight, and power (SWAP) benefits. Very large format cold plates may be constructed with fluid passages of greater size and may therefore utilize vacuum brazing as a construction technique. Single-phase and two-phase cooling can be achieved with a variety of fluids or refrigerants. Two-phase cooling may require the cold plate to operate with the coolant under considerable pressure. Parker has many years of experience manufacturing and testing complex fluid management systems and components that need to operate under extreme pressures in harsh environments.

• Voltage (VAC): 115
• Speed (RPM): 2300/2800

Hicool manufactures these AC Cooling Fans in varying voltages of24VAC, 115VAC, 230VAC& 415VAC. These cooling fans are available in frequencies of 50 Hz and 60Hz. Hicool’s AC Fans are available in both plastic blade as well as metal blade. The sizes of AC Axial Fans vary from 80 mm to 280 mm. Plastic blade AC fans are generally of sizes 80mm to 220mm. All AC Fan models are available in both ball bearing as well as sleeve bearing. These AC Axial Fans are available in both low speed as well as high speed depending upon the application.

WE ARE OFFERING OPPOSED BLADE DAMPERS

Owing to our capacity of meeting the exact requirements of the clients, we are supplying quality PP FRP Ducting. As a customer-focused firm, we strive hard to delight them with high- quality range of products that are the perfect outcome of premium raw material and modern work methods. FRP Ducting System has excellent dimensional accuracy and is light-weight and easy to install.   

• Application: Industrial
• Color: Blue and Black
• Country of Origin: Made in India

• Brand Name: Britomatics
• Inside Diameter: 20-22mm
• Outside Diameter: 30-32mm
• Weight: 100-150gm
• Application: Filter Use
• Length: 10inch
• Shape: Round
• Material: Polypropylene
• Country of Origin: India

PP pleated filter cartridge is manufactured by 100% polypropylene media to provide a wide range of chemical compatibility. PP pleated cartridge are made of 2-3 layers of membranes. The benefit of Multi Layer Membrane structure is that it enables graded filtration pore size and increase the dirt holding capacity of the cartridge. With rigid outer cage and strengthened inner core, the PP Pleated Filter Cartridge can withhold higher operating pressure.

• Feature: Durable, Easy To Use, High Performance
• Type: Industrial Refrigeration Equipment
• Warranty: 1year
• Material: Mild Steel

Compact AC fan, Axial Fans, filter dryer, Shaded Pole Motor, Compact DC fan

Industrial Refrigeration offers Walk in Cooler System for Hospitality, Super Market, Pharma & other sectors . Walk-in cooler and walk-in freezer are standard modular cold room chamber to cool or freeze food, beverage, meat, fruit, vegetable, pharmaceutical material, chemical or other goods stored inside. Different standard dimension of cold-room length, width, height for the walk-in fridge of walk-in refrigerator, chiller & freezer are available. Storage temperature of the walk in cooler & freezer can be optional -5 ℃ or -20 ℃ for the refrigerating storage or freezing storage of fresh vegetable & fruit or frozen food.The modular walk-in freezer & cooler cold room can easily be disassembled and reassembled if required to be moved to a different location. The cold room panel of the walk in cooler and walk in freezer chamber is made of high density polyurethane with an average density of 40kg/m3 for good insulation. Cam lock tongue and groove panel cold room design with gasket makes the walk-in cooler & walk-in freezer perfectly sealed. Condensing unit and fan coil unit. Digital thermostat enables precise temperature control. Cooler has years of experience manufacturing walk-ins for a wide variety of uses and industries. Bars Pubs & Nightclubs - Beer Coolers Convenience - Display Coolers & Caves Floral - Floral Refrigerators Grocery - Storage Coolers & Freezers Hunting - Meat & Game Lockers Mortuary - Body Boxes Residential Bars - Brew Caves Restaurant - Foodservice Walk-Ins Warehouse - Cold Storage Warehouses

tube diffusers, Rotary Valves, Slide Gate Valves, bagging systems

We are engaged in offering a wide variety of Condenser to the clients. These condensers are precisely manufactured using premium grade steel, which are obtained from the most credible vendors of the market. Apart from this, these condensers are meticulously tested on varied industry set parameters in order to offer an immaculate range of products to our patrons. The offered range is highly acknowledged for their unique features like:  Corrosion resistance Perfect functioning Low maintenance

• Weight: 100-1000kg, 1000-2000kg, 2000-4000kg
• Color: Black, Brown
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw
• Warranty: 1year, 2years, 5years
• Features: Good Quality, Durable

We are well known for Plastic Dehumidifier. We also offers Air Handling Unit and Accessories, Desiccant Rotor, Desiccant Rotor and Energy Recovery Ventilator. We offer a wide array of Plastic Dehumidifier. This range is designed with the up-to-date technicality and high grade raw material at the production unit. The offered products are widely used to process blower motor, reactivation heaters, reactivation blower motor, filters, steam coil and gear reduction unit. Customers can buy these products at market leading prices. Features: Robust design High strength Longer working life

We have supplied several surface condensers to our valuable clients on a regular basis. The largest condenser manufactured by us to date is for Jindal Steel Works (Captive Power Plant) which comprised of 14000 tubes.

Al. extd. Profiles-Thermal Brake / Non Thermal Brake, With / without internal coving.Panels of 25 mm / 50 mm, CFC free PUF Insulation 40 Kg/m3. Base frame, Nylon corners, Hinges, Al. aerofoil volume control dampers, DX / CHW Coils

• Electric Current Type: DC
• Material: Galvanised Steel
• Pressure: 130 psi
• No. Of Blades: Six
• Speed: 2300 RPM
• Phase: Three Phase
• Frequency: 50-60 Hz
• Mounting: Wall Mount