Brake Parts Dealers in Turbhe, Navi Mumbai

• Brand Name: ASS
• Pack Size: 720ml
• Pack Type: Tin Bottle
• Form: Liquid
• Shelf Life: 1 Year

Features of HD 1015 - Heavy Duty Mechanical Parts Cleaner Heavy Duty Parts Cleaner is designed to penetrate and effectively dissolve and remove oil, grease, brake fluid, and other soils from all metal parts, heavy machinery, farming equipment, mining equipment, and any other mechanical parts in extremely difficult situation. Low odour properties improve operator working conditions.Will quickly and effectively flush built up grease from chains and slides on forklifts, wire ropes and all types of industrial equipment.   Application of HD 1015 - Heavy Duty Mechanical Parts Cleaner The product is designed to be effective in heavy duty cleaning of machine parts, disc & drum brakes and forklift chains, wire ropes, open gears, bearings, valves, sprockets etc.   Direction of HD 1015 - Heavy Duty Mechanical Parts Cleaner Shake well before use until the sound of the ball is audible. clean & degrease surface Hold the can at least 10 to 12 cm from the surface you are spraying and keep the can upright during use.Protect & Mask areas not Coated. Two light coats is best results better than one heavy coat.Coating becomes dry in 20 minutes. make sure the surface is completely dry before using.completed cure takes place in about 24 hours depends upon the humidity. & maintain full pressure on valve while spraying. Repeat spraying whenever necessary. When finished spraying, clean the aerosol valve by turning the can upside down and pressing the button until only propellant escapes.   Precaution of HD 1015 - Heavy Duty Mechanical Parts Cleaner Contains gas under pressure do not punctured ,may explode if heated. Extremely flammable Prevention : Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Pressurized container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. Avoid breathing vapor. Wash hands thoroughly after handling. Causes serious eye irritation. May cause drowsiness and dizziness Response : IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.   Storage of HD 1015 - Heavy Duty Mechanical Parts Cleaner Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122 °F. Store in a well-ventilated place.keep container tightly closed. Keep Out of Reach of Children

• Country of Origin: Made in India
• Brand Name: Green Power
• Model Number /Name: Gp Bmm-2L
• Height: 1050mm
• Width: 450mm
• Depth: 350mm
• Voltage: 230V
• Frequency: 50/60Hz
• Power During Operations: Max 18VA
• Temperature Range: -20 Deg C to +70 Deg C
• Operation: 1. Open Brake Oil Cup in vehicle’s Bonnet,2. Deep Insert White Suction Pipe in Brake Oil Cup,3. Make Machine’s Mains Switch ON and Put Suction Switch ON,4. Machine will start sucking Old Brake Oil from Cup and will put it in Waste Oil Tank at Rear sid

Ssb & smb series brakes, are single disc fail safe brakes. These brakes are absolutely fail safe in nature, and finds wide range of applications where emergency stop is required. These has to the connected directly to three phase ac supply. When power fails or brake remains in engaged condition for longer period of time, these brakes are ideal for the application.

We efficiently carry out systematic process at every stage, to make certain that the product basket is developed as per the specified requirements. Ours is a reckoned name in the domain as we are capable of bringing forth quality products, fabricated using the experts approved raw material. We only make use of certified raw material to maintain high standards. We offer a wide array of the commercial vehicle brake parts designed for easy installation, low maintenance and long service life. 

We make use of user-friendly interface that enables us to network and control the sorting, loading and unloading of all the finished products from a single location. By this, we make sure that the voluminous consignments are kept safely till the final send off. Not only we present excellent products, but we are also flexible enough to make superfast deliveries and within the promised time.

• Minimum Bend Radius (mm): 10 - 76
• Tube I.D. (mm): 2 - 14
• Media: Brake Fluid

Air Brake Tubing is 100% pressure tested, meets SAE Specification J844, has excellent abrasion and kink resistance and is designed for use in air brake and transportation applications.

We are also into making of different types of ba quality brake linear as per the demand of the sizes and thickness.

• Phase: Single Phase
• Power Source: AC
• Feature: Flange Mounted, Foot Mounted Fitted with DC Brake
• Torque Range: 4NM to 360NM

pneumatic brakes, Linear Actuators, motion control, thk linear motion guides

• Material: Mild Steel
• Color: Black
• Length: 18 inch
• Surface: Painted
• It's Rust Proof: Yes

• Pack Size: 300 gm (500 ml)

It thoroughly cleans disc and drum brakes, clutch components, adhesion and sealing surfaces of lining dust, oil, grease and dirt. Evaporates instantly leaving no residue. It is non-corrosive and non-staining.

Cable, Distribution Board, Mcb Distribution Board

Manual Brake, Precision Balls and Rollers, Electric Brake

Brakepads and disc, BMC AIR FILTERS, Lenso alloys, Headlamps

Cable, Wire, Distribution Board, Mcb Distribution Board

Brake Pads, car care product, metal boxes, Metal Stamping, Radiator Coolant

Three Wheeler Brake Shoes

Brake Shoe, electric bikes spares parts, Clutch Plate, Chain Sprocket

Cable, electrical component, Electronic Component, polycab cable