Braking System Dealers in Vashi, Navi Mumbai

• Country of Origin: Made in India
• Brand Name: Green Power
• Model Number /Name: Gp Bmm-2L
• Height: 1050mm
• Width: 450mm
• Depth: 350mm
• Voltage: 230V
• Frequency: 50/60Hz
• Power During Operations: Max 18VA
• Temperature Range: -20 Deg C to +70 Deg C
• Operation: 1. Open Brake Oil Cup in vehicle’s Bonnet,2. Deep Insert White Suction Pipe in Brake Oil Cup,3. Make Machine’s Mains Switch ON and Put Suction Switch ON,4. Machine will start sucking Old Brake Oil from Cup and will put it in Waste Oil Tank at Rear sid

We efficiently carry out systematic process at every stage, to make certain that the product basket is developed as per the specified requirements. Ours is a reckoned name in the domain as we are capable of bringing forth quality products, fabricated using the experts approved raw material. We only make use of certified raw material to maintain high standards. We offer a wide array of the commercial vehicle brake parts designed for easy installation, low maintenance and long service life. 

• Brand Name: ASS
• Pack Size: 720ml
• Pack Type: Tin Bottle
• Form: Liquid
• Shelf Life: 1 Year

Features of HD 1015 - Heavy Duty Mechanical Parts Cleaner Heavy Duty Parts Cleaner is designed to penetrate and effectively dissolve and remove oil, grease, brake fluid, and other soils from all metal parts, heavy machinery, farming equipment, mining equipment, and any other mechanical parts in extremely difficult situation. Low odour properties improve operator working conditions.Will quickly and effectively flush built up grease from chains and slides on forklifts, wire ropes and all types of industrial equipment.   Application of HD 1015 - Heavy Duty Mechanical Parts Cleaner The product is designed to be effective in heavy duty cleaning of machine parts, disc & drum brakes and forklift chains, wire ropes, open gears, bearings, valves, sprockets etc.   Direction of HD 1015 - Heavy Duty Mechanical Parts Cleaner Shake well before use until the sound of the ball is audible. clean & degrease surface Hold the can at least 10 to 12 cm from the surface you are spraying and keep the can upright during use.Protect & Mask areas not Coated. Two light coats is best results better than one heavy coat.Coating becomes dry in 20 minutes. make sure the surface is completely dry before using.completed cure takes place in about 24 hours depends upon the humidity. & maintain full pressure on valve while spraying. Repeat spraying whenever necessary. When finished spraying, clean the aerosol valve by turning the can upside down and pressing the button until only propellant escapes.   Precaution of HD 1015 - Heavy Duty Mechanical Parts Cleaner Contains gas under pressure do not punctured ,may explode if heated. Extremely flammable Prevention : Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Pressurized container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. Avoid breathing vapor. Wash hands thoroughly after handling. Causes serious eye irritation. May cause drowsiness and dizziness Response : IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.   Storage of HD 1015 - Heavy Duty Mechanical Parts Cleaner Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122 °F. Store in a well-ventilated place.keep container tightly closed. Keep Out of Reach of Children

• Pack Size: 300 gm (500 ml)

It thoroughly cleans disc and drum brakes, clutch components, adhesion and sealing surfaces of lining dust, oil, grease and dirt. Evaporates instantly leaving no residue. It is non-corrosive and non-staining.

We are also into making of different types of ba quality brake linear as per the demand of the sizes and thickness.

• FEATURES AND ATTRIBUTES:: Anodized housing – corrosion protection • Light weight • American made
• Weight (lbs): 0.45 to 1.5 lb
• Minimum Operating Temperature (F): -65° F
• Maximum Operating Temperature (F): 275° F

Pull-type master cylinders are an alternative to push-type master cylinders and are common in the general aviation market. Pull-type master cylinders are used when the aircraft’s linkage is not set up for a push-type master cylinder due to cockpit design constraints or the air framer’s preference. The aircraft’s linkage is set up to pull the rod of the master cylinder. This action is achieved when the pilot puts a foot on the brake pedal to stop the aircraft.

Driven by the passion to provide nothing but the best, we have risen as trusted suppliers of Disk Brake in the market. Along with a spacious warehouse, our efficient Warehouse Management System helps us in keeping a track of all the products. We stringently maintain inventory by recording warehouse transactions and delivery of goods.

• Phase: Single Phase
• Power Source: AC
• Feature: Flange Mounted, Foot Mounted Fitted with DC Brake
• Torque Range: 4NM to 360NM

• Material: Mild Steel
• Color: Black
• Length: 18 inch
• Surface: Painted
• It's Rust Proof: Yes

pneumatic brakes, Linear Actuators, motion control, thk linear motion guides

Hand Wash Liquid, packed car shampoos

These cables are used for low volatge Electrical power station, indoor or Outdoor,all kinds of Industrial Applications. Standards as per IS - 1554 (Part-1) Max. Conductor D.C. Resisitance at 200C conductor size 1.50 sq.mm - 12.1 Wkm (Bare) and 12.2 W km (Tinned copper) 2.50 sqmm - 7.41 Wkm (Bare) and 7.56 Wkm (Tinned Copper)

Automotive Seat, Mobile Holder, Steering Wheel, steering, Spark Plug

Brake Shoe, electric bikes spares parts, Clutch Plate

Fine Chemical, Tetra Hydro Furan

Cable, electrical component, Electronic Component, polycab cable

Cable, Power Factor Correction Panel, Wire

Clutch Plate, Automotive Axle, automotive shaft, Piston, Two Wheeler Parts

Industrial Lubricants, Motor Flush, Grease, Sealants, engineering adhesives

transformer insulation parts, core, connection

Disc Brake Parts

Three Wheeler Brake Shoes

Manual Brake, Electric Brake, Magnetic Servo Clutches, Power Jacks

metal boxes, Metal Stamping, Wiper Blades

Heavy Vehicle Brake Parts

Cable, Wire, Power Factor Correction Panel