Building Material Dealers in Kopar Khairane, Navi Mumbai

• Packaging Type: 250/200/50kgs. Drum.
• Appearance: Light Brown / Yellowish liquid
• SP. Gravity: 1.20 to 2.02
• pH: 7+1
• Chloride Content: NIL
• Air Content: <0.5%
• Normal Temperature: Around 28C
• Self Life: 12 Months
• Storage: Under Shed

PCP I00 IOIL h light brown/yellowish coloured polycaboxylic ether based new generation hyper plasticier confirming to EN specification, developed for specitic application in high performance concrete.The hyper dispersion effect products by PCP EASE 101L. Exhibits better durability and performance in concrete. PCP EASE 101L is compatible with all portland cement and pozzolonic materials confirming to international standards.Advantages Increases early and ultimate compressive strength. Make higher E modules. Imparts better resistance to carbonation and aggressive atmospheric effects. Reducces permeability. Reducces shrinkage and creep. Increases durability of concrete. Places concrete with zero vibration -reduces labour cost. Primary appliction areas Rheodynamic concrete self consolidated concrete OPC-Pozzolana concrete High volume fly ash concrete Dosages / Uses PCP EASE 101L in the range of 0.3 to 1%  by weight of cement. The dosage can be enhanced to further 3% as per requirements, but it is advisable to go for trial mix to determine the optimum dosage. The Requisite of CIS LPC-111 Should be added after addtion of minimum 50 tom 70% of gauging water before mising with wet cement aggregate system. SafetyPCP EASE 101L is non toxic, non flammable and non hazardous, However, any splash on the human bosy should be washed out immediately with plenty of waters.

Refractory Mortars are finely ground refractory materials which become plastic when mixed with water. Theses are used to bond the brickwork into solid unit, to provide cushion between the slightly irregular surfaces of the brick, to fill up spaces created by a deformated shell, and to make a wall gas –tight to prevent penetration of slag into the joints.

• Brand Name: TIGER FLATE PLASTER OF PARIS

We offer Plaster of Paris that is widely used to design and protect ceiling and walls. Plaster of Paris is resistant to fire and can protect buildings from large damage and destruction. We offer Plaster of Paris of the finest quality. We make available Plaster of Paris in suitable packaging in different quantities. Definition : Plaster was a common building material for wall surfaces in a process known as lath and plaster, whereby a series of wooden strips are covered with a semi-dry plaster and then hardened into surface. The plaster used in most lath-and-plaster construction was mainly lime plaster. Lime plaster cure time is about a month. To stabilize the lime plaster during curing, small amounts of Plaster of Paris were mixed into the putty*. Because Plaster of Paris sets quickly, "retardants" were used to slow setting time enough to allow workers to mix large working quantities of lime putty* plaster. A modern form of this method uses expanded metal mesh over wood or metal structures, which allows a great freedom of design as it is adaptable to both simple and compound curves. Today this building method has been partly replaced with drywall, also composed mostly of gypsum plaster. In both these methods a primary advantage of the material is that it is resistant to a fire within a room and so can assist in reducing or eliminating structural damage or destruction provided the fire is promptly extinguished. Plaster moulding is made using a sliding jig that holds a die with a cross section of the Moulding. *Putty as Known as Whiting Kaolinite China Clay, it is for chalk powder Application : Plaster of Paris forms the basis of many commercial, Plasters used for interior decoration as House, Office, Building. As a false ceiling, studio sets etc. Precaution to be taken before & during usage of product : Take a water for mixing with plaster of paris as volume ratio 60 ml water 100 gms powder. After mixing this product apply on a wall with steel plate to make level or fill hole of wall. Setting time is 3 minutes as final setting time is 10 minutes. Packing list : 1 kg, 2 kgs, 5 kgs, 20 kgs

VITCON 9045 NM a pre-packed readymade compound with hard granules of predetermined sizes. The physical characteristic of this mineral originated powder mix is to enhance the surface strength of concrete floors and also to impart abrasion resistance against traffic movement.

• Shelf Life: 1yr
• Color: White
• Form: Powder
• Packaging Size: 20Kg Bag, 25Kg Bag
• Purity(%): 90 %
• Calcium (%): 56 %
• Features: Finely grained Water soluble Highly stable

• Form: Liquid
• Packaging Type: Barrel
• Country of Origin: India
• SKUs: 230kg
• Specific Gravity: 1.12 ± 0.05
• pH: 6 - 8
• Chloride Content: Max. 0.1 %

Features: Economical high-performance producing. High-grade ready-mix concrete. Easier placing & faster strength development. High water reduction ability. Efficiency at low dosage in ready-mix Versatile dispersant   Benefits & Advantages: Increases Workability & Durability Increases Productivity Enhanced Pumpability Easy to Use Reduces Costs

• Type: Superplasticizer Admixture
• Application: Admixture
• Shelf Life: 1 Year
• Color: Brown
• Form: Liquid
• Packaging Type: Drum
• Packaging Size: 200kg
• Country of Origin: India

vitcon 9002 mf is high range water reducing admixture based on modified polycondensate of sulphonated naphthalene and melamine formaldehyde. vitcon 9002 mf is a brown liquid and dispersed thoroughly with cement particles in concrete. vitcon 9002 mf conforms to astm c 494 type f.technical specifications: properties: values appearance: brown liquid specific gravity: 1.20 ± 0.02 chloride content: nil ph value: 7.5 ± 1 shelf life: 12 months storage conditions: under shade packing: 200 kg drums   applications:   the optimum dose should be obtained by conducting site trials with particular concrete mix. for  guidance add the vitcon 9002 mf at a dose of 200ml to 1000ml per 50kg of cement depending on the uses required.

• Country of Origin: India
• Type: sand
• Color: white
• Condition: New
• Function: All Types Of Construction Work
• Automatic Grade: All
• Packaging Type: Bags
• Application: All Types Of Construction Work
• sand: good Quality

Gujarat Sand Price is Rs. 105 par Bags 50 kg  to as per location. 100% pure Gujarat Sand, rate will be negotiable as per loaction and requirements.

• Country of Origin: India
• Size: 3*5 Inch
• Hardness: 5-6.5 Mohs
• Purity: 99.5%
• Staone Type: Gabbro Stone
• Packaging Type: Plastic Box

Shopper be is into supplying building material ,industry tools and home decors across india. Our aim is to be one stop solution for all your building material, furnitures, gardening tools, electronic security and safety tools at a best price.

Our Multipurpose Solid Fuel Additive is a free flowing powder treatment designed primarily for treating coal, wood and other solid fuels. It acts as combustion catalyst and thereby loss due to unburnt fuel gets minimized resulting in improved combustion efficiency. It has an anti�fouling agent that helps to keep heat transfer surfaces clean and thus improves the steam generation for same heat transfer area. It softens the hard clinker and reduces the tendency of hard clinker formation, thus helps in reducing the boiler maintenance, provide ease in cleaning and increase the boiler availability for long term operation. It promotes smoke free combustion at lower excess air levels, resulting in improved fuel economy.

• Type: LIQUID
• Brand Name: ACI
• Application: CONSTRUCTION
• CAS No.: 3824
• Purity: 99%
• Condition: GOOD
• Appearance: WHITE
• Application: CONSTRUCTION
• Packaging Size: 225 Kg
• Form: Liquid
• Application: Set-retarding,Air-entrainment, Water-reducing
• Condition: Good
• ASTM C494: Type A, B & D
• Applications: Industrial

• Application: Ceramic Industry, Concreting
• Color: Brown
• Form: Crystal Granules
• Packaging Type: HDPE Bag
• Packaging Size: 50 Kg
• Apparent Density: 2.65 gm/cm3

We offer Quartz Grit. The most popular sizes of our High Purity Quartz Grits and Filler are as under: 0.1 to 0.4 mm 0.3 to 0.7 mm 0.6 to 1.2 mm 1.2 to 2.5 mm 2.5 to 4.0 mm 4.0 to 6.0 mm 0.8 to 0.15 mm 38 Microns

• Size: 4*4
• Color: Black
• Shape: Standard
• Thickness: 16 MM,20MM,22MM,25MM
• Brand: JollyBoard
• Usage/Application: Road Construction

(HRWRA, conforms to IS 9103-1999 (Amendment 2003) and ASTM C 494 Type G) KEM SUPLAST 101 S is a sulphonated naphthalene formaldehyde based superplasticizer enables the concrete to achieve following parameters:High retention in workability. Good cohesion and homogenity. Less bleeding and segregation. Increased durability.

• Application: Superior Whiteness
• Pot life: 25 – 30 minutes
• Initial Setting Time: 15 – 20 minutes
• Coverage @ thickness of 10 mm.: 20 – 25 Sq. ft./Bag of 25 Kg

buildwell gypsum plaster is a light weight gypsum based plaster suitable for application on most internal surfaces including brick, block and concrete. It consists of superior quality gypsum, formulated with special additives to enhance working and setting characteristics, also improves workability and coverage. When dry, it provides superior whiteness, smooth and matt finish and is suitable for all internal dry plastering applications.   features superior whiteness affordable & cost effective free from shrinkage cracks provides excellent bonding light in weight imparts high coverage zero maintenance     benefits   faster setting than the conventional sand cement plaster reduce structural load on building as it is 50% lighter then sand – cement plaster direct application on rcc, sand cement plaster surface & surfaces to be repainted smooth matt uniform surface finish no water curing required compatible with all types of paints & decorative range low consumption of paint

KEM SUPLAST 101 S is a sulphonated naphthalene formaldehyde based superplasticizer enables the concrete to achieve following parameters:High retention in workability. Good cohesion and homogenity. Less bleeding and segregation. Increased durability.

Concrete blocks use mix of cement, sand, stone chipcrusher dust with low wc ratio suitable for moulding in block making machines. These mixes have very low work ability. It improves the work ability and homogeneity of the mix which help in attaining higher density of blocks when pressed in block machine or hand operated machines or cast at site in steelwooden moulds.

The ArCADia-REINFORCED CONCRETE SLAB is a structural program, which creates a spatial model of the slab’s reinforcement, allows further editing and, for example, automatic creation of new slab cross-sections, based on the data entered by the user, in the form of views of the slab’s top and bottom reinforcement plates and the element’s cross-sections. The shaping of the slab’s reinforcement plate in the program is possible based on the guidelines specified in the PN-EN 1992-1-1 Eurocode 2: September 2008 standard. This program allows the entry of data regarding the slab’s shape and support by the design engineer and captures data concerning the slab’s shape and support directly from the ArCADia-ARCHITECTURE program based on the set ceiling. If the cover of the given level in the ArCADia-ARCHITECTURE consists of several ceilings, all ceilings after their selection are transferred to the ArCADia-REINFORCED CONCRETE SLAB program as separate models of reinforced concrete slabs.

Alumina castables Excellent mechanical performance in all temperature range High refractoriness and lot properties Improved volume stability.

We manufacture and export high quality Quartz Lumps [silica]. Our Quartz Lumps are used in all leading industrial uses. Quartz Lumps are made up of a lattice of silica (SiO2) tetrahedral. Quartz Lumps have hardness of 7 on the mohs scale and a density of 2.65 gcm.

cement wall putty, Paint & Coating Chemical, Paint Remover

Refractory Mortars, High Purity Dense Castables, Acid Resistant Mortar

We are best offering Sandstones

cement grout, Acid Proof Bricks, Acid Resistant Bricks, Building Bricks

Shotcrete Accelerator

Crumb Rubber Modified Bitumen, Bitumen, mastic asphalt, Bitumen Emulsion