Busbar Systems Dealers in Navi Mumbai

We are well known Exporter and Supplier of Copper Busbars in Maharashtra, India. Our Busbars are known for their perfect finishing and excellent quality. The Busbars that we offer are fabricated using high-grade copper in order to provide durability. We can provide Copper Busbars in different thickness, dimensions and other specifications. Our Copper Busbars has wide industrial application. We can make available Busbars at reasonable prices.

We are offering dsl system. Having accomplished a strong foothold in the engineering sector, silverline metal engineering is pioneer in the domain of manufacturing crane components.

Features : Ample amount of spacing between the phase busbars Easy installation High reliability & extremely low maintenance. Précised ventilation slots. More economical in terms of current rating as compared to power cables of the same rating. Description : We manufacture L.T bus ducts of exceptional quality of the desired current rating and fault level which have the capability of conducting large amount of electric current through the aluminum or copper busbars. It is used in various industries to supply power from the secondary side of the transformer / outgoing side of the D.G set to the incomer side of the Main L.T panel / distribution panel. L.T Bus duct is the most preferred substitute to power cables. Usually it is preferred due to its high-power transmission ability. We design & manufacture efficient L.T bus ducts as the application demands or as per the customer’s specifications. We also provide MCCB’s or other electrical protection devices on customer’s demand to make it easier to control the power flow in events of maintenance/shutdown. Used In:   Commercial & Residential buildings Malls Pharmaceutical Plantss Chemical/Oil/Gas Plants Hospitals

DSL SYSTEM ALSO KNOWN AS DOWN SHOP LEAD SYSTEM Conductor Power Bar (DSL SYSTEM)Components & Specifications Power supply to the runway electrification shall be by means of bridge conductors and collector system as shown above. The typical components and specifications are as follows: Conductor Bar – Track are super finished and cross section is maintained to achieve required Ampere.The material for track is GI,Al/SS & Copper. Conductors shall be accurately aligned to ensure positive electrical contact between the collector and the conductor. Separate conductors shall be provided for each phase. More than one conductor in a single enclosure will not be permitted. Maximum voltage drop from the building power takeoff point for the track electrification system tothe hoist motor shall not exceed 4 percent, and the equivalent conductance shall not be less Size of bridge conductors shall be proportioned to limit the total voltage drop in the conductors to a maximum of 3 percent of the supply voltage when the current on the individual motors is full load. Power feed – This is an attachment for incoming power and is a fully insulated simple clamp type is easily installed anywhere on the system for incoming power to the conductor rails. The power supply to the runway conductors shall be controlled by a switch or circuit breaker located on a fixed structure, accessible from the floor, and arranged to be locked in the open position. A fused, manual disconnect switch with a lockable handle mounted through the panel door shall be provided and wired into the incoming power circuit. All power for crane shall be supplied through one main visible blade fuse switch located on the crane bridge in an easily accessible position. 3) Collectors - Current collector assembly consists of a spring loaded sliding contact type shoe of hard copper alloy or sintered copper graphite. Shoe shall be mounted in an insulating case of phenolic or urea compound of suitable temperature and insulation quality. Exposed parts of current collectors shall be grounded and of corrosion-resistant material. Current collector assembly shall be designed to operate through gaps, splices, and switches and shall be self-centering. System shall include expansion sections for every 150 meter for systems using galvanized steel conductors and every 175 meter for systems using copper conductors. 4) Hangers- Supports the conductor bar, may also be used as an anchor to direct movement due to expansion and contraction 5) End Cover- Used to close the end of the conductors to cover exposed conductor and avoid accidental contact. 6) Insulating cover –Insulation cover shall be rigid PVC, self extinguishing, with a heat distortion point of 160ºF at 260psi. 7) Connector pins - Used to join the conductor bar sections together . System shall be complete with unit length conductors, insulating conductor covers, insulators, splices and splice covers, end caps, support brackets and fasteners, current collectors, expansion, isolation and power-interrupting sections, disconnect switch, and conduit and wiring to power takeoff point. We manufacture Dsl system ranging from 60A to 1250 A Advantages Of Our Dsl System 1.Dip of the track is maintain properly for movement of Current collector 2.Center Powerfeed is provided to decrease voltage Drop 3.The play between Track & Sleeve is Minimum 4.Current collector is provided spring steel with max dia to avoid breakage We give Test certificate & Warranty Certificate for Dsl system & There erection for Period of 1 Year

• Brand Name: Panbase
• Diameter: 2-20mm
• Grade: Grades
• Application: Multiple Application
• Length: 3000 - 5000 mm
• Cu (Min): 99.90 Min
• Place of Origin: Maharashtra, India
• Supply Ability: 300 Ton/Tons per Month

• Type: Busbar Supports
• Application: Control Panels, Industrial Use, Power Grade
• Color: Brown, Creamy, Light Grey, Off White, White
• Condition: New
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish, Water Proof
• Temperature: High Temperature, Low Temperature, Medium Temperature

Shrouded Bus Bar (DSL) system are used for the electrification of mobile equipment. This system is very easy to install and has less failure rate. Wear and tear is also less which improves life of the system. Smooth running of the DSL ensures best performance of control panels with VVF drives.

• Application: Multiple Application
• Model Number: copper busbars
• Brand Name: Panbase
• Supply Ability: 300 Ton/Tons per Month
• Place of Origin: Maharashtra, India
• Cu (Min): 99.90 Min
• Grade: Grades
• Packaging Details: Export Worthy Packaging, As Per Request from client.

It is Metal clad type & having type tested design up to 6300A 415V AC 50/60Hz. Having type test certificates for 65KA 1 second and 50KA 3 seconds. Totally insulated live parts and having good heat dissipation capacity for particular current & voltage ratings. It is having parallel earthing path to avoid shock & hazardous to operators due to leakage currents or instant of any fault conditions. Having provision for space heater & Silica gel to absorb moisture during raining season or when not in use.

• Application: For Control Panel Installation
• Material Used: DMC

We are one of the best leading supplier of Busducts

We are offering insulated bus bars ara available from 60 amperes to 1250 amperes rating. these are modular in construction and compact in size. spring loaded current collectors are supplied that ensure positive contract with current transmitting surface. Conductors are available in gi, aluminium, copper and stanless steel matrial. bus bars with expansion joint, hospital bay and suitable for curved track are also available.

bus bars, Hook Block, Rope Drum, Brake Drums, Wheel Assembly, Coupling

busbar system, proximity control unit, instrument stands, Analog indicator

Bus Bar, turret punching, Powder Coating, Zinc plating

Bus Ducts, Automatic Mains Failure Panel, power factor control panels

bus bars, Precision Sheet Metal Components, Sheet Metal Fabrication

Copper Bus Bars, Control Panels, panel board, panel board accessories

7SS85 Centralized Busbar Protection, Substation Automation System

PCC Electrical Bus Ducts, Painting Turnkey Contractor