Control Panels Dealers in Ttc Industrial Area, Navi Mumbai

We offer Multichannel Control Panel. Gasmonitor is an expandable microprocessor-controlled 19 inch rack based gas and fire detection system which controls up to 16 channels per rack. Each channel has its own dedicated gas or fire detector input card controlling either one gas detector or two fire zones (monitoring up to 20 fire detectors per zone). Designed to meet the requirements of large installations which need centralised hazard monitoring and the ability to monitor at several alarm levels. Gasmonitor offers the ultimate in user-configuration through its microprocessor control and RS232 interface. A suitable IBM compatible PC and Crowcon's SetGmon software makes set up and configuration of Gasmonitor quick and easy. Once configured, routine daily adjustments can be made without fuss from the front control panel of Gasmonitor. And Gasmonitor is equally suited to new and retrofit applications, as it is compatible with the vast majority of gas and fire detectors - including infrared and optical types - currently in use.

• Phase: Three Phase
• Material: Mild Steel
• Voltage: 220-440 V
• Finishing: Coated
• IP Rating: IP 44
• Frequency: 50-60 Hz

• Phase: Three Phase
• Material: Stainless steel
• IP Rating: IP44
• Usage: Generator

Our organization is avidly engaged in supplying an exclusive range of Circuit Breaker Panels at reasonable prices. We have high-tech and a spacious storage unit that is incorporated with all required amenities vital for a safe storage of the products till the final send off. Supervised by efficient personnel, they ensure zero damage to the items to keep up the standards. Circuit Breaker Control Panels have highly precise dimensions which help in easy fixing and removal.     

• Frequency: 50 - 60Hz
• Surface Finished: Coated
• Capacity (Ampere): 100
• Meter Type: Analog
• IP Rating: IP45
• Phase Type: Three Phase
• Voltage (V): 380 - 440
• Humidity (%): 85
• Cable Entry: Back Side
• Automatic Grade: Semi-Automatic
• Body Material: Mild Steel

In industry, most of the load is inductive in nature which results in lagging power factor that is why there are loss and wastage of energy which results in high power bills and heavy penalties from electricity boards. If the load is uneven it is very difficult to maintain unity power factor. To overcome this difficulty apfc panel is used which maintains unity p.f. Features and applications : 1) high speed power factor correcting system is designed to compensate the reactive power of any load or equipment required p.f. Correction within one cycle of operating frequency or time delay of 30 sec to 5 min after command signal from apfc controller. 2) renders the distribution network more stable since there is no contactor switching causing high voltage transients, spikes, harmonics and other disturbances by applying zero crosses over voltage switching on and zero current switch off of the capacitors. 3) prevents voltage drop and flickering reduces failures in highly sophisticated electronic equipment like plcs. Computers and other control systems. 4) helps in reducing maximum demand and rkvah consumption hence a substantial reduction in monthly electricity tariffs. 5) it is highly suitable for spot welding applications where the reactive energy is to be compensated for a short period of 200 msec or less and for a number of times in a second. 6) accurate power factor control even in the presence of harmonics.

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

We manufacture purge panels for • combustible dust: zone 21 & zone 22 as per iec600079-2 combustible dust: class ii, division 1 & division 2 as per nfpa 496 • hazardous gases vapours: zone 1 & zone 2 gas group- iia, iib, iic as per iec600079-2. Hazardous gases vapours: class i, division 1 & division 2, gas group a, b, c &d as per nfpa 496. Salient features of our purge panels are: • atex ccoepesocimfr ul certified purging system • enclosure moc-ms powder coatedss-304 ss-316 • x-type z-type y- type purging system • no restriction on size of enclosure • vortex cooling option available • nema 4x variant available we have supplied over 300 purge panels for various applications and they are functioning without a single failure till now & our supplied panels not only working in in india but also in various countries like dubai, qatar, saudi arabia ksa, oman, abudhabi,kuwait and also in austria, germany, usa, australia, sri lanka, singapore, malaysia, vietnam, indonesia, india, nigeria, china, south korea, bangladesh, zambia, kazakhstan, uzbekistan, north africa, moroco etc…

  programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise,less effect of vibration,can work in dusty conditions and extended temperature range.

• Ratings range: 63A up-to 400A

Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections. Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections.

It is Metal clad type & having type tested design suitable up to 400KV switchyards It is equipped with Siemens, Areva & CSPC protective relays along with MIMIC presentation.

We are manufacturer and supplier of PCC Panel. We offer PCC panels which are used for diverse industrial applications and provide reliable and effective service. With best usage and productivity, these offer high controllability and also available at market leading prices.We offer superior quality PCC Panel to control power production and distribution.     Features :-  Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply . They will be installed indoors and will work efficiently up to an ambient temperature of 50°C. All doors will be suitably labeled and marked for convenience of operation & maintenance.  Construction :- Type: Single /double sided.Modular design, free standing and will have fixed or draw out type executions as many be desired. Finish:The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. Bus Bars: Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal Wiring:Wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus:Bus Bars will be running all along the board. Switch Gears/ Components Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. Standards:Our Panels confirms to the standards such as, IS 4237; IS 8623; IS 375    

The Power Command Control is a microprocessor based generator set monitoring, metering, protection and control system. It offers advanced levels of functions for reliability and optimum genset performance.The power command control with digital paralleling control devices such as synchronizers and load sharing controls, and KVAR / Power factor controls.         Vesta Engineering is a Mumbai based company. Presently engaged in design, manufacturing & supply and installation of power panels, control panel, feeder pillars etc.         Manufacturers & suppliers of electrical Control Panels that include PLC Panel, AC Drive Panel, DC Drive Panel, LT Panel, PCC/MCC Panel, APFC Panel, AMF Panel, Generator Control Panel.       We manufacture and supply our high-quality products to cater to our client's requirements.     Our panel boards are made under strict supervision by qualified personnel. Very strict quality control is exercised on the production lines while the components and other raw materials used are of the best quality available   Its Types     1. A.M.F Control Panel 6. PCC Control panel Control (PCC)     2. Synchronizing Panel 7. ACB Panel     3. D.G. Set STD Control Panel 8. APFC Panel     4. Power Dist. Board (PDB) 9. MCC Panel     5. Change Over Panel Boards 10. RELAY Panel

Control Panel for EOT cranes manufactured by Silverline Metal Engineering Pvt. Ltd. are used to facilitate crane drivers in smooth operations of cranes during various operation.

We manufacture, supply and export a complete range of Control Panels. Fabricated using high grade components, these control panels strictly conform to the international quality standards.

We are well known manufacturers as we deal with electrical devices that are immensely important in the day to day industrial life. They are fabricated in such a manner that they impart all the functional properties in a definite manner. The very appearance of it is installed with various technical arenas but they are offered by us with elaborated manuals that are very easy to understand. The very purpose of this panel is to contribute to the ongoing work without fail. Features: Elaborated version. Precise make. Good quality.

We manufacture & design all types of the HMI Control Panelsas per the design or customer requiremnts

Crane control panel In our extensive range of products we are presenting our clients a complete range of crane control panels. these are widely applicable in linearly accelerated starting.

With the support of our competent procurement teams, we source and export a quality range of Electrical Panels. Using advanced and modern technology, these panels are manufactured from high quality factor inputs under the supervision of our experienced team of professionals. To get maximum satisfactions of our clients, our offered panels are tested with all quality parameters of the international standards. These panels are highly useful to avoid short circuit or overload. Apart from this, our offered panels are widely appreciated for their excellent features like durability, sturdy construction and reliability. With the help of our professionals, Dewdry Industries is capable in offering an exclusive array of Dehumidifier Control Panel. Offered panels are designed & developed by the experts in complete compliance with the international quality standards. Apart from this, these panels are strongly constructed to prevent damages and all useless electrical defaults. Available with us in various designs, these panels are highly known for their durability and sturdy construction. We offer these panels at effective rates. Features: Excellent performance Durable Low power consumption

We supply ac electrical lt panels for all kw and mw solar pv projects, as per the client's specification. Contact us for more information.

• FEATURES: Eight 5x7 DOT Matrix display, 5.0mm high character • Brightness display controlled by microprocessor • Customizable display data
• Weight (lbs): 3.3 lbs
• Operating Temperature (F): 131ºF to 158ºF

The refuel defuel control panel (RDCP) displays the fuel quantity for each tank, total on-board quantity, and warning status such as tank overfill. In addition, the RDCP is capable of automatic refuel, manual refuel, defuel, and transfer operations.