Control Panels Dealers in Navi Mumbai

• Application: Industrial Process Automation
• Features: Minimum Maintenance, Easy to Install
• IP Rating: IP40
• Phase: Three Phase

The major concern of our organization is to provide only quality approved products to the customers and thus we check each product at all stages. We maintain a high level of transparency when it comes to payment. Our methods are simple, as per your convenience, and practical. We ensure to agree upon a method during undertaking. Instrument Control Panels have a sturdy body with easy to use operational buttons and a long service life. 

• Phase: Three Phase
• Application: ACDB
• Material: Mild Steel
• Frequency Range: 50 - 60 Hz
• Type: Analog Meter
• Power Source: Electric
• IP Rating: IP44
• Capacity (Amps): 100
• Mounting Type: Free Standing
• Automatic Grade: Semi-Automatic
• Input Voltage (V): 220 - 330
• Coating Type: Painted
• Ambient Temperature: 30 - 45 Degree Celsius
• Thickness: 7 - 15 mm
• Humidity: 85%

• Voltage: 220V
• Body Material: Mild Steel
• Power: 1-3kw
• Power Source: Electric
• Phase: Double Phase
• Autoamatic Grade: Automatic
• Brand Name: SAAKVEE

Lift Control Panel monitors the status of lift on LCD as well as record the faults. It is password protected so that only authorized person can change the parameters. Manual will be consisting of parameters list and instructions of programming. We share glorious credentials in the list of top Suppliers of Lift Control Panel from Maharashtra, India. Customers can place retail as well as bulk orders for Lift Control Panel with us.   Features : In case of mains failure, the lift stopped between two floors is moved to floor level, the automatic door is opened and passengers are out safely, for lifts with automatic door, in case of a mains failure at floor level, the door is remain opened. Optional Features  Powder Coated M.S. Cage Panel with a choice of Standard Colour Combination M.S. Car Ceiling with Painted White Stainless Steel Cage Wooden cabin with decorative laminates P.V.C. Flooring with a choice of Standard Colour Combination Chequered Plate Flooring (M.S. / Aluminium) False Ceiling with Concealed Lighting Pressure Fan with Aluminium Grill for proper Ventilation Aluminium / S.S Hand Rails Mirror on the Rear Panel

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

• Certification: CE Certified, ISO 9001:2008
• Application: Constructional
• Color: Black, Light White
• Voltage: 220V
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 5years
• Country of Origin: India
• Brand Name: MORPHEUS
• Resolution: HIGHT
• Products Status: LIVE
• Series: MTP
• WHITE: BLACK

In industry, most of the load is inductive in nature which results in lagging power factor that is why there are loss and wastage of energy which results in high power bills and heavy penalties from electricity boards. If the load is uneven it is very difficult to maintain unity power factor. To overcome this difficulty apfc panel is used which maintains unity p.f. Features and applications : 1) high speed power factor correcting system is designed to compensate the reactive power of any load or equipment required p.f. Correction within one cycle of operating frequency or time delay of 30 sec to 5 min after command signal from apfc controller. 2) renders the distribution network more stable since there is no contactor switching causing high voltage transients, spikes, harmonics and other disturbances by applying zero crosses over voltage switching on and zero current switch off of the capacitors. 3) prevents voltage drop and flickering reduces failures in highly sophisticated electronic equipment like plcs. Computers and other control systems. 4) helps in reducing maximum demand and rkvah consumption hence a substantial reduction in monthly electricity tariffs. 5) it is highly suitable for spot welding applications where the reactive energy is to be compensated for a short period of 200 msec or less and for a number of times in a second. 6) accurate power factor control even in the presence of harmonics.

Electric Control Panels are manufactured for the purpose of balanced and uniform electrical power distribution. We are one of the prominent Electric Control Panel Suppliers based in India. Electric Control Panels are developed with modern technology for safe and stable power distribution. Range Of Electric Control Panel Synchronizing PanelsCapacitor PanelHT & LT Distribution Panels,PCC, MCC PanelsAuto Mains Failure (AMF) Panel

• Size: Standard
• Type: Automatic
• Voltage: 220V
• Material: Mild Steel
• Power Source: Electric
• Phase: Double Phase, Single Phase
• Brand Name: Alfa

Altair designs and offer PLC automation panels for all gas applications where remote operation & monitoring of gas equipments is required. PLC's with closed looped feedback system to communicate with BMS are programmable as per exact customer requirements. These panels are the most advance piece of equipments in gas control technology and easily integrate with various SCADA platforms.

We supply PLC & Switchgear Automation Panels in variety of protection classes - IP52, IP55, IP65, IP44 for different levels of protection against dust and water. Panel enclosures are 1.6 to 2 mm thick, available in materials such as cold rolled closed annealed mild steel (MS CRCA), SS304, SS316 sheets. These materials remain corrosion and rust resistant in highly reactive environments. With a high strength to weight ratio the control panels are made lightweight without any compromise in strength. PLC Panels can be stand alone, self standing or wall mounted. PLC based Panels from PLC of Allen Bradley, Siemens, Modicon, GE Fanuc. Our wide ambit of products includes Industrial Control Panels such as Machine Control Panels, Process Control and Instrumentation Panels, Electrical Panels, Shelter Houses, and Control ComponentsInstruments for Control Panels including PLC Relay Cards, Multiplexers, Single Conditioners, etc.

• Size: 500 X 500
• MOQ: CRCA Sheet
• Usage: Indoor & outdoor Application

We design & manufacture all kind of Electronics panel

It is Metal clad type & having type tested design suitable up to 400KV switchyards It is equipped with Siemens, Areva & CSPC protective relays along with MIMIC presentation.