Crane Spare Parts Dealers in Rabale, Navi Mumbai

Control Panel for EOT cranes manufactured by Silverline Metal Engineering Pvt. Ltd. are used to facilitate crane drivers in smooth operations of cranes during various operation.

We are offering tower crane trolleys that we provide to our customers are used to carry any raw material, cement sacks and lots more with the help of tower crane. The tower crane trolleys has a load bearing capacity of 3000 kgs. The tower crane trolleys that we provided includes wheels for easy movement within construction premises. The tower crane trolley integrates quality assured material and is widely appreciated by our valuable clients. We also provide tower crane trolley as per the specifications provided by our clients features : robust structurehigh strengthhigh capacitylow on maintenance

• Feature: Low maintenance for tubeless or tube-type • Tapered roller bearings for dimensional stability and long life • Molded grease seals for superior bearing bore sealing properties
• Material: Cast Magnesium or aluminum; forged aluminum
• Weight (lbs): 2.6 to 8.6 lbs

The tail wheel assembly can be on tricycle-type landing gear, as well as conventional gear with the tricycle gear being the most common. Tail wheels are designed to support a portion of the load requirements for the aircraft along with the main wheels, and are steerable on some aircraft.

• Load rating: Static load from 500 lbs to 8600 lbs
• Bearing: Tapered roller bearings
• Accessories: Hubcaps or dust shields

Nose wheels are designed to support a portion of the load requirements for the aircraft along with the main wheels. The nose wheel provides a means of steering control, if so equipped. The main wheels transmit stopping forces from the brake to the ground. Wheels are made from either aluminum castings, magnesium castings, or aluminum forgings. The wheel is of the divided type, incorporating inner wheel half and outer wheel half, which are fastened together with tie bolts, washers, and nuts. The wheel rotates on two tapered roller bearings which seat in bearing cups, shrink fitted into the hubs. Molded grease seals provide protection and lubricant retention for the bearings. Hubcaps, when used, are secured to the outboard wheel half by a snap ring and screws.

Forged Hook with C shank and Ramshron Type Sheave made from Cast Steel with grooves machined accurately for wire rope support. Sheaves with hardened groove are also available Hook Block Assembly comprising of Hook, Sheave Assembly, Side plates and rope guard. The is supported on thrust bearing and can swivel easily. Hook Block are supplied with Load locking finger and mechanism to stop hook rotation when requested by customer. Steel Wire Ropes with IWRC (Steel Core) as well as Fibre Core. Special features such as anti rotation, galvanized and Stainless steel ropes are also available Rope Drums are made from seamless pipe or MS rolled plates. Rope drums are supplied with or without flanges as per customer requirement. Butt welded joints in rope drum shell made from MS plates are tested radiographically. Rope drums are thermally stress relieved when made from MS plates. Left hand and right hand grooves are machined on rope drum for proper support to wire rope. Connection between hoist gearbox and rope drum can be made through splined joint, flexible in built geared joint or Barrel coupling/ Malmedie coupling. Rope drums are supported at non drive end in drum pedestal that houses antifriction ball/ spherical roller bearing. Rope Band & Guide are made from Cast Iron. Rope band and guide can also be supplied based on your sample Hoist Gearboxes – Two, Three and Four Stage gearboxes are supplied from Crane Hoisting application. The gearbox casing is made from MS fabricated plates. The casing is thermally stress relieved after welding. The casing is accurately machined on horizontal boring machine. The helical gears and pinions are made from rolled/ forged steel of En9/ En19/ Cast Steel material as per design requirement. Gears and pinions are oil quenched and tempered to achieve toughness as well as surface harness. Gear teen are machined hob cut. Case hardened gear teeth are supplied as required. Shafts are supported on antifriction ball and roller bearings. Oil seal seat on shaft are have ground finish. Gears and pinions are Splash lubricated. CT Gearbox – Two and Three Stage Gearboxes are supplied for Crane CT and LT motion. The construction of CT gearbox is similar to hoist gearbox except that these are provided with inverted T split in  housing. The Output shaft can project on both side if so required. For Three stage vertical gearbox forced lubrication arrangement is provided through pump and hoses. Other gearboxes are splash lubricated. Brake Drums and couplings with brake drums – Brake drums are made from rolled bar or cast steel. The brake drums are fully machined to eliminate vibration. Brake drums are dynamically balanced after machining when required by customer. The drum surface is treated to achieve high hardness for longer life. Wheels and Wheel Assembly – Wheels are supported in L type bearing blocks. Wheels are made from forged steel/ cast steel and machined accurately. Wheels are suitably heat treated to achieve hardness of 250 – 300 BHN with volume hardening or 450 – 500 BHN with Induction hardening as per customer requirement. Tram wheels with either non ferrous bush bearing or antifriction bearing and open gear attached  are also supplied as required by customer. Compact Enclosed Festoon Cable System – made from enclosed GI track the compact festoon cable system is lightweight and no need to be supported against girder diaphragms. The system is ideally suited for flatform cables are single core cables. The compact nature of cable trolley means better hook approach and the system can be placed at crane girder level. The system is of modular design and can be assembled very easily. Components are available ex stock including PVC flatform cables Pendent Cable with built in steel wire is available ex stock. Shrouded Bus Bar – Insulated bus bars are available from 60 Amperes to 1250 Amps rating. These are modular in construction and compact in size. Spring loaded current collectors are supplied that ensure positive contact with current transmitting surface. Conductors are available in GI, Aluminium, Copper and Stainless steel material. Bus bars with expansion joint, hospital bay and suitable for curved track are also available. Other spare parts - Electro Hydraulic Thrustor Brakes, Brake Shoe and Lining, AC and DC Brakes, Brake Hub & Rotor, Brake Coil, Brake Armature, Pin Bush Couplings, Geared Couplings, Slip Ring Motors, Sq Cage Motors, Induction motors, dual speed motors, foot and flange mounted motors, Pendent Push button station. Crane Capacity Upgradations is an area of immense interest to the crane users. Backed by our engineering strength and skilled service team, we provide cost effective solutions for Study of crane operation to decide duty classification Crane Up-gradations studies Capacity Upgradation on turnkey basis Crane Span Modification Crane Electrical System Upgradation

overhead trolleys

Crane control panel In our extensive range of products we are presenting our clients a complete range of crane control panels. these are widely applicable in linearly accelerated starting.

cable trolleys, crane components, digital subscriber line system

Mfrs AC/DC brakes which are very fast operating solenoid actuated spring loaded brakes of Fail Safe design mounted on the shaft extension of the non driving end of the motor Due to the springs pressure the friction disc is held tight between the mounting plate and the floating plate. When the coil/magnet is energized the coil/magnet attracts the floating plate against the springs pressure and the brake is released These types of brakes are largely used on Hoists, Cranes and Winches in Paper, Rubber, Steel, Textile mining and Cement Industries etc.

We are one of the well established supplier a wide range of Crane Control Panels

We supply forged crane hook with c shank and ramshorn type to handle load up to 500mt. ramshorn hooks are designed specifically for lifting heavy loads and are commonly used throughout the marine lifting industry. we use high quality steel for forging, our hooks can be supplied with seafty catches if required and shank length can be forged to your specificatons to allow for machining requirements.

Wireless Remote Control, CCTV Cameras, Wireless Panic Switch

Monorail Trolley, Turn Table, Slat Conveyors, Screw Conveyor, scissors lift

Wheel Assembly, Single Girder EOT Crane, Hook Block, Rope Drum, Brake Drums

Trolley, Chain Pulley Block, lifting tackles, Material Handling Equipment

Trolley, automobiles accessories, Handles, Pipes, Silencers, stands

electro hydraulic thrustor brake, DBR Resistance box / Decade Box

standard crane scale, pH Meter, Conductivity Meter, Orp Meter

crane parts, crane mounting stud

Vertically Articulated 5 AXIS Robot ARM, 16 Channel PC Based Logic Analyzer