Cranes Dealers in Navi Mumbai

• Type: Eot Crane
• Certification: ISO 9001:2008
• Application: Construction, Industrial
• Color: Yellow
• Feature: Heavy Weight Lifting
• Condition: New
• Automatic Grade: Electric, Mechanical
• Power: 100-300bhp
• Load Capacity: 10-15tons, 15-20tons, 20-25tons, 25-30tons, 30-35tons, 35-40tons, 40-45tons, 5-10tons, 50-55tons, 55-60tons
• Warranty: 1year
• Country of Origin: India
• 50 ton: GOlden Yellow
• long span: auxilary lift

We “indian heavy lfters,” are most reliable and knowned supplier and service providers of a wide range of crawler crane, mobile crane,earth moving equipment, pilling equipment,telescopic crane, jcband hydra crane.

• Application: Construction
• Feature: Customized Solutions, Heavy Weight Lifting
• Automatic Grade: Manual
• Load Capacity: 5-10tons
• Warranty: 1year
• Minimum Order Quantity: As per Customer Needs

• Country of Origin: India
• Type: Eot Crane
• Application: Construction

Nandan recognizes the fact that the facilities are the biggest constraint in the execution of orders. We have designed our facilities to be of redundant capacity. We have factories in four locations around Mumbai in Andheri, Kurla, Navi Mumbai and Khopoli. We are also planning a further addition to capacity by means of additional plant within the next 1-2 years. Head Office : Marol 2500 sq ft with small assembly facility. Close to our hearts as it was established 19 years ago. Works (Old) : Kurla 15,000 sq ft workshop which is in the heart of the city and 4 km from the airport. Works Unit 1 : The Turbhe unit of NGSEPL is in the heart of Maharashtra Industrial Area in Turbhe (District Thane) with access to rail and road infrastructure. The unit is completely owned by NGSEPL. The unit consists of the following facilities : 22,500 sq. ft. with shed of 5 m high and having a concrete floor 12� thick and asbestos sheet Office building with 4000 sq of space housing a conference room, staff rooms, directors offices, stores, design room and even an in-house pantry Scope of expansion : The facility can be expanded here by increasing the height of shed as well as the office building. The current space is planned with optimal layout and with full space utilization and leaves scope for future expansions. Works Unit 2 : Khopoli New facility with operates started in March 2008 and having a total area of 40,000 sq ft and built up shed (phase 1 ) of 15,000 sq ft of 9m height and having an EOT of 5 ton capacity Another feature is just 20 kms from JNPT port of Mumbai. Capabilities : All kinds of fabrication Designing and execution PUF and FRP in house Special Purpose machine conceptualization and delivery Design Capabilities : Licenses owned for ALIBRE 2012 for 3 D modeling and analysis Autodesk Simulation mechanical 2012 for FEA modeling and analysis Knowledge to operate Solidworks and ProE Access to third party design firm (LUMIUM) based in Ahmedabad who have tremendous experience in modeling and huge engineering projects Machinery Used : EOT Crane (5 ton) Profile cutting machine (80mm thick capacity with 2000mm dia) Lathe upto 4 feet for machined components Hydraulic Hacksaw machine Part off saws for pipes MIG welding machines TIG welding machines Arc welding machines Inverter based 400A, 300A, 200A, 150A Sheet metal press for 4mmx2500mm capacity Hydraulic press 200, 150, 100, 80 ton capacity Radial Drill machines 50mm, 38mm Pedestal Drill Machines 38mm Magnet drill machines 20mm Hand drill machines 6mm, 10mm, 13mm, 16mm, 19mm Angle Grinder 125mm, 175mm Hydraulic powerpacks for testing upto 6000 psi Pug machines for straight cuts Jib cranes Crane pulleys for site jobs Hydraulic floor crane Vertical Access equipment on wheels upto 10m Stackers for loading/ unloading Painting systems for Polyurethane, enamel, rust proof paints Fibre Glass upto 6mm thick and size of 7.1mx3m PUF with density of 40 kg/m^3 and insitu poring as well as pads with standard size of upto 2m panel Stainless steel work incuding final buffing and polishing upto pharmaceutical grade Access to third party processes : Sheet metal bending upto 12mmx 6300mm single stroke Lathe for long shafts, screws and rounds upto 600mm and 3m long Hot dipped galvanizing Powder Coating Hard chrome plating Centerless Grinding, shaping, slotting, etc Wheel cranes upto 11-20 tons for loading/ unloading Specialized tackles for site assembly Material already working with : MS (Flats, Tubes, Channels, Angles, etc) Aluminum (sheets, chequered plates, tubes, sections, etc) Stainless Steel 304 (sheets, flats, sections, grills) FRP PUF

We are offering mini tower crane that we manufacture and supply is the best alternative for tower crane because of its affordability and size. The mini tower crane has a load bearing capacity of 1 ton and can operate up to a height of 250 meters. The mini tower crane that we provide is available at the most competitive rate in the market. specifications : capacity : 1 tonoperating height 250 metersoperating speed : 25 to 30 meters/ minboom length : 0 to max. 3.5mtrsboom with a 3600 swingdouble electromagnetic brakeelectric gear box features : affordableeasy to install and shift from one floor to anotherequipped with easy operating systemsaves timeno skillful operator required

• Capacities: 1 Ton to 125 Tons

Hercules overhead traveling cranes are designed and manufactured in accordance with IS 3177 OR IS 4137 and classes ranging from M1, M2, M3, M4, M5, M6, M7 and M8, considering adequate factor of safety with respect to appropriate duty classifications. The structural parts of Hercules industrial cranes are designed in accordance with IS 807.In case of double girder crane, a crab is used for hoisting and cross traversing machinery move on the top of two bridge girders. The bridge girders could be of box type construction made from rolled plates or made of standard rolled section depending on the capacity and span of the crane.

• Application: Construcation

We are one of the best Mini Hydraulic Crane Manufacturers and Suppliers from Navi Mumbai. The Mini Tower Crane, provided by us, comes with effective capacity of 1 Ton coupled with operating speed of 30 meters per minute. Our Small Tower Cranes are a huge hit in the market as they are a good alternative to the tower cranes because of their affordability and size. They are equipped with easy operating systems and save times as they are easy to shift from one floor to another. Technical Specifications Capacity - 1 TonOperating Height 250 MetersOperating speed- 25 to 30 meters/ MinBoom Length – 0 to Max. 3.5MtrsBoom with a 3600 swingDouble Electromagnetic BrakeElectric Gear box Features AffordableEasy to install and shiftEquipped with easy operating systemSaves time

Double girder cranes are rugged in construction and find their use in a wide range of hoisting capacities and applications. The promoters of Aditya Cranes have experience of designing cranes up to 500 MT capacity.Double girder EOT crane find their application in power plant, workshop duty, transformer industry, cable industry, process plants, steel plants, coal fields, cement plants, engineering industry to just name a few.Heavy duty barrel winch type of double girder cranes are designed and manufactured to customer’s precise needs.Special Features of Barrel Winch Cranes : Capacity up to 250 MT Barrel Winch construction with True Vertical Lift Robust construction suitable for heavy duty application Alloy Steel, hardened, precision cut gears Foot mounted type fabricated gearbox casing horizontally split at centre line for ease of maintenance for hoist Foot mounted hydraulic thrustor brakes for hoist Lift and speeds to suit your specific application Ample space on trolley for ease of maintenance L Type housing for Long travel wheels Full length (along the crane span) platform on the Long travel drive side girder All motors are TEFC with class F insulation VVVF drives are available as an option Option for Pendent, Radio Remote and Cabin Operation In case of double girder crane, the trolley housing hoisting and cross traversing machinery move on the top of two bridge girders. The bridge girders are of box construction made from rolled plates. However for smaller capacities and spans, the bridge girders are also made from standard rolled sections.For standard workshop duty crane the hoisting unit is comprised of compact wire rope hoist unit. While in case of heavy duty or higher capacity cranes, the hoisting unit is made from fabricated and machined rope drum housing left hand and right hand grooves to achieve true vertical lift. The rope drum is connected to total enclosed helical gearbox through flexible drum coupling. The gearbox is driven by electric motor either sq. cage induction type or slip ring type. Fail safe hydraulically operated thrustor brake or DC brake is provided on input shaft of gearbox to prevent accidental lowering of load in the event of power failure.For special steel mill ladle handling application, the wire rope arrangement can be supplied with four rope independent suspension to prevent falling of load in case of failure of one wire rope. The hoisting gearbox can be supplied with integral planetary arrangement and two hoisting motors for achieve hoisting motion at 50% of full speed in case of failure of one hoisting motor. Planetary gearbox can also be supplied for operating 4 rope grab bucket to achieve hoisting as well as grab opening/ closing operations.Special features for hoisting arrangement include motorised hook rotation, two hook blocks suspended from hoist drum supporting lifting beam, special anti sway rope arrangement for rotating lifting beams, magnets suspended from hook block/ lifting beam, tong suspended from rope system, grab bucket suspended from wire rope system or hook type grab, hot metal handling crane with motorised hook rotation, fixed mast crane to prevent load sway during acceleration and deceleration.In addition to Main Hoist (MH) an Auxiliary Hoist (AH) can also be provided on the same trolley. On customer’s request, two or three trolleys can be operated on the same pair of bridge girders for special application with a facility for load summation.The cross travel machinery comprises of motor gearbox and brake unit coupled to wheel assemblies with live axles. The spherical roller bearings housed in L type of bearing housing are provided for heavy duty application.The bridge girders are made of plate box construction of ample strength and rigidity. Full depth vertical diaphragms are provided inside the box for stability. Short diaphragms are provided in between full depth diaphragms to support the rail section that support the trolley. Horizontal diaphragms are provided as needed to prevent buckling of web plates.For special applications wide box girder design is provided as per customer’s requirement. In this case the electrical panels are housed inside the box girder to protect the electrical and electronic components from metallic dust as well as heat. As an alternative to wide box girder design, a completely enclosed electrical house supported on crane platform can be provided.Full length walkway platforms are provided along the LT drive side girders for heavy and extra heavy duty cranes. Platform/ Walkways are provided on all other cranes as per customer’s specifications.Power is supplied to trolley through flexible festoon cable system. For lower capacity and light duty cranes, compact festoon cable system or drag chain system is used for trolley power supply. For higher capacity/ heavy duty cranes beam rider trolleys moving on heavy duty I beams supply power to machinery installed on the trolley.The girders are supported at ends by rigid end carriages that house long travel wheels. The arrangement of end carriage is decided by application as well as number of long travel wheels that support the load. Crane capacity, runway rail size, duty classification of crane, LT speed are some of the factors that affect the sizing of LT wheels.Depending on design requirement cranes with 4, 8, 12, 16 and longer travel wheels are provided for crane LT drive. The drive unit comprises of motor, gearbox and brake unit. Hollow output shaft gearbox that is installed directly on wheel axle is provided for light and medium duty crane. For heavy and extra heavy duty cranes the long travel gearbox, motor unit is mounted on a separate LT machinery platform and the gearbox is connected to Long travel wheel through a pair of half geared coupling and floating shaft.In case of heavy duty cranes, the hoist, CT and LT gearboxes are made from MS fabricated steel duty stress relieved before machining. The helical gears are machined hob cut and are housed in precision machined housings. Gears are dipped in oil bath and are splash lubricated.The motor speed and torque can be controlled through variable frequency variable voltage drives commonly known as VVVF or VFD drives as per customer’s requirement. Slip ring motors with resistance control is also employed as per the buyer’s choice.

• features: Robust, light weight design built for continues industrial application.,Available for capacity from 0.5Ton to 20Ton.

A crane is a type of machine, generally equipped with a wire ropes or chain hoists, and sheaves, that can be used both to lift and lower materials and to move them horizontally. It uses one or more simple machines to create mechanical advantage and thus move loads beyond the normal capability of a human. It is mainly used for lifting heavy things and transporting them to other places and assembling of heavy equipments.

Aditya make Under Slung Cranes are modular in using standard wire rope hoist or electric chain hoist. The Under slung single girder crane is very similar to overhead travelling crane except for the fact that the end carriages are hung below the gantry girders made of I section. The Crane’s end carriages are hung below the shop I Beam. The Long travel wheels move on the beam flanges and the beam girder is supported below the end carriages.   The Under Slung Cranes can also be supplied with overhang (girder extending beyond crane span) on one side or both the sides as per the requirement of customer. The crane mainly comprise of bridge girder made from rolled sections such as I beams/ U beams. The bridge girder is connected to two end carriages, each housing a pair of wheels and running on the shop beam flanges. The wheels are driven by motor gearbox units. A wire rope hoist or electric chain hoist is suspended below the bridge girder. The crane can be operated through pendent station hanging from wire rope hoist or through radio remote control. The pendent station can be made to move independent of hoist movement as per customer’s choice. Power supply to the wire rope hoist is through festoon cable system. The flexible cables are supported by cable hanger or cable trolleys that move on either taught wire or enclosed C track depending on customer choice.

The company is a major Exporter and Supplier of Jib Cranes in Navi Mumbai. The company is offering the finest Jib Cranes to the clients based in various parts of the world. The Jib Cranes are sourced from the best vendors and the company offers the crane on time at the best prices. Features : Designed & manufactured in accordance to IS-807 & IS-3177 Wall mounted or pillar type and fully floating on bearings with swivel facility up to 360 degrees Self aligned type double roller thrust bearings take care of horizontal, vertical and radial thrust loads Available in lifting capacities ranging from 250 kgs to 7500 kgs and arm radius as desired for the required applications Jib arm fabricated from heavy section 1-beam or of triangular truss construction to keep the deflection in acceptable limits Jib arm is suitable to accommodate trolley with chain pulley block for manual travel and lifting operations or electric wire rope hoist for electric operations

Double girder EOT cranes are rugged in construction and find their use in a wide range of hoisting capacities and applications. Double girder EOT cranes mostly find their applications in steel plants, power plants, coal fields, cement plants, engineering industries and so on. In double girder EOT crane the trolley housing hoisting and cross traversing machinery move on the top of two bridge girders. The bridge girders are of box construction made from rolled plates. They also facilitate multiple hoisting capacities with auxiliary lifting mechanism.   Features Maximum stability due to double girder box design. Geometrically reliable during assembly owing bolted design. The gearbox is driven by electric motor either sq. cage induction type or slip ring type Fail safe hydraulically operated thruster brake or DC brake Multiple speed selection option for all motions using VVVF Drive or slip ring motors Ideal for operator by using optional cabin control. Easy maintenance with walkways and assembly platforms Full length walkway platforms are provided along the LT drive side girders for heavy and extra heavy duty cranes. Platform/ Walkways are provided on all other cranes as per customer’s specifications. Power is supplied to trolley through flexible festoon cable system. The girders are supported at ends by rigid end carriages that house long travel wheelsOptional: Cabin or Radio control

Global Industries is associated with Xuzhou Jiufa Machinery selling their product in India. We provide services on Rental Basis as well as new truck crane, Rough Terrian Crane, Crawler Crane etc. We have strong team provide quality services and producing high quality, world class product with good quality and most competitive price.

• Condition: New
• Type: Flat Top Crane
• Application: construction
• Span: 80 m
• Hoisting Capacity: 5-10 ton, 10-15 ton, 15-20 ton, 20-25 ton, >25 ton
• Capacity: 5-10 ton, 10-15 ton, 15-20 ton, 20-25 ton, >25 ton, 6t-160t
• Jib Length: 30m-80m
• Power Source: Electric
• Radius: 30m-80m
• Tip Load: 1.2t-32t
• Voltage: 410 V
• Frequency: 60 Hz

Knuckle boom crane maker : hydra marine type hmc 2398 lkd 40-31 (100-20) (pb-15) machine no. - sp1768-0606 year : 2006 good condition