Digital Multimeter Dealers in Navi Mumbai

• Type: Digital Multimeter
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: Control Panels, Industrial Use, Power Grade Use
• Color: Green, Grey, Light Green, Sky Blue, White
• Condition: New
• Frequency: 45Hz, 66Hz
• Power Source: Battery, Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warranty: 1year, 2years
• Operating Current: Double Phase, Single Phase, Triple Phase
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Temperarture Capacity: High Temperature, Low Temperature, Medium Temperature

• General Specifications: Power Requirements Voltage 110V/220V AC ± 15%,Power Consumption ≤ 20VA max Etc.

6½ Digit Display (11,99,999 counts) 12 Different Measurement Capabilities ; DCV ACV, DCI ACI, Ω2W Ω4W, Frequency Period, Diode Test, Continuty, dB dBm High brightness vacuum fluorescent display True-rms AC voltage and current measurement, bandwidth up to 300kHz DCV measurement accuracy up to 0.0035%, resolution up to 0.1μV Max. measurement rate : 1000 meas sec Equal accuracy frequency measurement up to 1.1 MHz Relative mode (REL) to eliminate residual reading 2W, 4W resistance measurement mode selectable Built-in mX +b, %, dB, dBm etc mathematics calculation function 512 reading storage and MAX MIN AVER STD statistics Up to 30,000 readings storage (without statistics) HI IN LO comparator function USB, BPIB and RS-232 Interfaces provide easy system communication Calibration without opening the case 10 sets of multimeter setup can be stored and loaded.

A device that can measure voltage, current, or resistance. A digital multimeter is the most versatile and common meter used today for electrical maintenance.

• Warranty: 2 Year
• Model Name/Number: DM 63
• Brand: Meco
• Digit Display: 3 Digit

• Frequency: 2kHz/200kHz (± 3.0%)
• Power Source: 6F22 (9V) x 1
• Frequency response: 40
• DC voltage: 200mV/2V/20V/200V/1000V (± 0.5%)
• AC voltage: 2V/20V/200V/750V (± 0.8%)
• DC current: 20mA/200mA/20A (± 0.8%)
• AC current: 20mA/200mA/20A (± 1.0%)
• Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ (± 0.8%)
• Capacitance: 20nF/2µF/200µF (± 2.5%)
• Temperature: -40°C
• Size: 189 x 97 x 35mm
• Weight: approx. 375g (including battery)
• Model: DT- 603 Digital Multimeter

• Storage conditions: -20°C to + 60°C, 0-80% RH
• Display: 3 ½ digit liquid crystal display

Set FunctionRange switch to desired current type (DC or AC) and range. If magnitude of current is not known, set switch to the highestrange and reduce until a satisfactory reading is obtainedTurn off power to the device or circuit being tested and discharge all capacitors. Open the circuit in which current is to be measured. Now securely connect test leads in series with the load in which current is to be measured.Turn on power to the device or circuit being tested.For current measurment of 200mA or greater, connect the red test lead to “20 A” input terminal & black test lest lead to the “COM” input terminal. If the resistance being measured is part of a circuit, turn off power to the circuit and discharge all capacitors.Overrange indicationHighest digit of(1) or (-1) is diplayed at MSDTest leads (pair) x 1, spare fuse 0.8A 250V x 1, battery (installed) x 1, instruction manual x 1 & carring case x 1 Single, standard 9-volt battery,Eveready 216 or equivalent. displayed when the battery voltage drops below the operating voltage

Digital Mini Multimeters, Media Preparator, coating thickness measurement