Dryer / Drying Machine Dealers in Ttc Industrial Area, Navi Mumbai

Cooling tunnels maybe fabricated – two blowers force ambient or outside air in while drawing the heated air from the parts out the opposite end. Simply passing air over a part results in significantly faster cooling. Why you need paint spray booth ? LAW : There is a statutory requirement under the Factories Act that adequate ventilation be installed wherever spray painting is carried out. SAFETY : Spraying paint may involve fire risk from both solvent and overspray deposits. A spray booth is essential to dispose off both.

• Vacuum Tray Dryer: Standard models range from 3 trays to 96 trays

Application: Used for drying of high grade temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances which are dried to very low residual moisture content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. We are manufacturer, supplier and exporter of vacuum tray dryer as per ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the globe. Working Principle Vacuum Tray Dryers Vacuum tray dryer is the most commonly used batch dryer. They are either box – shaped or cylindrical shaped loaded and unloaded via a door. Inside are several heating plates mounted one above the other on which the product is placed in trays .The Top of both heating plates (Shelves) and the bottom of heating shelves trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam, or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To avoid retrograde condensation, the cabinet walls are indirectly preheated by limpet coil provided on the outer side of the body (Optional). Only after all the product trays reach the same temperature, the cabinet is evacuated and drying can start. (The preheating phase is very important in order that the drying curve and the foaming of product are identical throughout the cabinet). During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuum of only few mbar abs are reached. The vacuum can be controlled through PLC in order to reduce the drying cycle. Nitrogen can also be purged in the VTD according to the product. Our Specialities Creating innovative and cost effective designs as per your requirement to give you maximum and best output from our equipment Providing Lab Models in exactly the same material to give the accurate results Design and supply of entire turnkey projects at any scale, from 500 kgs to 20,000 kgs capacities. The dimensioning of the vacuum system is an important factor in the design of drying cabinet systems .If for example vigorous foaming of the product is desired, evacuation to the operational vacuum level must take place very quickly. Vapors produced during drying are taken out directly to a surface condenser in which the vapours condenses. Non-condensable vapours are extracted by the vacuum system. On completion of the drying, the product can be cooled by circulating of cooling water through the heating plates. Vacuum tray dryers with watering vacuum pump & high vacuum Rotary oil ring Pump can be providing Promas Edge Over the other Manufacturers of vacuum tray dryers. One touch door Opening & Closing system. No door Sagging Machine Welded heating shelves for maximum heat transfer and no contours or deformation Channel Type Heating shelves for faster heat transfer rates Online receiver Drain-ability under vacuum Larger Diameter Vacuum suction pipe for minimal choking and maximum vapour suction Single Piece gasket for Door ensuring no leakage Completely Welded body World class aesthetics

Compressed air coming from the Receiver containing solid, liquid & vapour contaminants enters the Dryer through the Pre-filter (where solid & liquid contaminants are removed). It then passes through Oil Removal Filter and enters into Adsorption Tower A1 through a 3-way valve (CV-1) where it gets dried and then passes out of the Dryer through the After-filter. A part of this dry air passes through Tower A2 through the Purge Control Valve, where it picks up the moisture from the adsorbent thereby regenerating it and making it ready for the adsorption cycle. The purge air exhausts out of the Dryer through Purge Exhaust Valve (CV-2) of Tower A2.

Fluid Bed Processing involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries. The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size The machine is designed with correct volume of bowl, air velocity, direction and the temperature of the clean inlet air is maintained throughout the fluidization, retarding and expansion chambers, filtration area, pitch of the perforations of the plate at the bottom of product container, the leak-proof fluidization space by proper sealing, material of the filters and process controls with electrical & pneumatically. The uniform drying is achieved by exposing the full surface of every particles of the solid mass to the incoming high velocity hot air. Option for the process parameters are controlled by using latest PLC controls with HMI touch screen thus making equipment operationally safe and eliminating the possibility of human error. The process consistency with batch records is maintained for every batch every time. The equipment can be inbuilt CIP system gives a thoroughly cleaned equipment for every batch eliminating contamination of subsequent batches. Salient Features : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Single piece construction with Integrated retarding expansion chamber cum filter bag housing Batch type dryer with available capacity 30 kg to 500 kg. Batch size Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube. Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric. Exhaust air blower with dynamic balance fan. Built in Explosion vents and isolation valve protect equipment. Automatic Temperature controls for Inlet Air and Process cycle time controls. Washable filter media, FDA approved. Auto pneumatic filter bag shacking system. Sampling pot on product container. Electric and Pneumatic controls panel. Optional Features : Additional Product container. Advance PLC controls with touch screen Double scan AHU with Dehumidifier. Steam or Electric Heater Exhaust AHU with Filter Silencer at exhaust blower. CIP - WIP system. Explosion proof motor and push button. Solid flow detection System. Differential Pressure gauge for filter. Safety Features : Product Bowl interlocking mechanism. Automatic Temperature & controls, Process cycle controls. Explosion flap ensure at retarding chamber. Safe earthling system for static current. Air pressure switch installed to ensure pressure is in limit. Overload relay Protection and Emergency stop button.

• Overall Dimension: 400 x 1000 x 480 mm
• Max Temperature: continuously adjustable, 40 - 150 °C

      The fluid bed dryer TG 200 is used in quality control, sample preparation and R&D departments. It permits the gentle drying of organic, inorganic, chemical or pharmaceutical bulk materials without localized overheating. Suitable materials can be coarse, fine, crystalline, fibrous or leafy. The powerful fan of the fluid bed dryer ensures optimal air throughput so that the products to be dried are loosened up and thoroughly mixed resulting in short drying times. With the interval operation the fluidized bed is mixed even better. Temperature, drying time and air volume can be set digitally and adjusted continuously.

• Color: White
• Brand Name: cottonmist
• Voltage: 1000watt
• Carton Contain: 6 pcs in one box
• Time Protection: 30sec

• solar dryer: solar fruit dryer
• solar vegitable dryer: solar pharma dryer

We are offering solar dryer can be used to dry all type of vegitables,ayurvedic products,fruits, we have domestic and commercial models also available. These can dry mushroom, chillies, etc in a hygienic manner. The tray of glass gathers heat from sun and heats it for drying products. It has great specifications and uses. The sheet is set in vertical direction facing sun.

We bring forth high precision Online Transformer Dryer in the national and international market. Designed in conformation to the industry specific norms, these Online Transformer Dryers are extensively used in different industrial applications. They are reliable, in durable and long lasting. Salient Features : Rust freeEasy to useLow to maintenanceHigh performanceRobust design Used In : Oil and Gas industriesChemical Manufacturing unitsPower & Energy industry

• Type: Agitated vacuum dryer
• Brand Name: Promas's agitated vacuum dryer
• After-sales Service Provided: we are always there to help our beloved customers

We are manufacturer, supplier and exporter of agitated vacuum dryers according to isi guidelines and user’s requirements since 1990 from mumbai to india and all over the world.

Our Heatless air dryer consisting of two towers filled with Activated Alumina and at a time one tower is under process and another tower is under regeneration simultaneously. We can achieve dew point of (-) 400 C (at atmospheric pressure) we can also get a dew point up to (-) 800 C but quantity of purging air will increase up to 25%. The capacities that we offer in this category are 10 NM3 hr to 1000 NM3 hr. Some of the features that need to be highlighted are

We develop high quality Ride-On Scrubber Drier (75-800). Well known for its superior design and easy to use interface, the Ride-On Scrubber Drier (75-800) is one of the prime choices for various scrubbing purposes. The Ride-On Scrubber Drier (75-800) also comes at a very reasonable price. Salient Features DurableEfficientEasy maneuverabilityReasonably priced

• Brand Name: Ankita Technologies (I) Pvt. Ltd.
• Automatic Grade: Automatic
• Minimum Order Quantity: 1 Unit

Rotary double cone vacuum dryers are suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator. Promas Engineers is a certified company for manufacturer, supplier and exporter of rotary double cone vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world.

Capacity: 5 Litres to 5000 Litres Application: Rotary double cone vacuum dryers are suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator. Promas Engineers is a certified company for manufacturer, supplier and exporter of rotary double cone vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle Rotary Double Cone Vacuum Dryers Raw material is charged in batches & is subjected to indirect heating while at the same time undergoing rotary motion of the cone assembly. The conical shape of the dryer ensures efficient circulation of hot liquid heating media. Drying takes place when heat flows from outer cone through a jacket, and vacuum is applied in the inner cone. The drying operation is based on the principle that water or other volatile product moves from a zone of low pressure. This is accomplished by warming the product to be dried to raise the vapour pressure of the absorbed or free liquid by vacuum or by sweeping it with Air or Nitrogen current. Thus the essential conditions for effective drying are achieved by uniform heat transfer throughout the batch and rapid removal of the vapour. The vacuum is applied gradually with PLC control by throttling.     Promas Engineers Rotary Double Cone Vacuum Dryer is unique in removing complete water, or other solvent from wet powders coming from a filtration unit or a centrifuge. It can be used as an effective dryer, fast mixer & blender or homogenizer. It can also be used as a granulator. The drying time is substantially reduced because of high-speed choppers, which help the evaporation of the solvent or moistures. Chopper speed can be controlled by a frequency drive. Dryer are manufactured as per “US-FDA” Standards & Regulations. Salient Features Rotary Double Cone Vacuum Dryers Low temperature drying under vacuum Higher Thermal Efficiency Specially designed micro air-filter can be provided on receiver while breaking vacuum for safety operation Nitrogen purging system is available optionally for mechanical seal as well as for cleaning filter Specially designed S.S. Rotary union is provided for hot water or steam at inlet & outlet Direct drive with hollow shaft gear to suit cGMP operation & to avoid greasing of the gear. The gear box with only one time of oil fill for lifetime Lowest energy consumption compared to any other batch type dryer due to higher differential temperatures Available in STD/GMP/cGMP/ Lab Models and kilo lab models Why RCVD? Suitable for drying of materials which cannot resist high temperature. Material which are easily oxidized Specialty chemicals Volatile Materials which should be retrieved Materials which are strong irritants and poisonous in nature Solvents which need to be recoverer Advantages: Reduces drying time. Total contained process, dust control. Efficient Charging and Discharge. Choppers (Lump Breaker) give lump free product. Easy Open-able charging port. Eliminates need for re-drying of lumps. Handling and exposure of final product is avoided. Gives uniformity size dry product. System can process crystalline or amorphous powders which are prone for lumps. Easy to clean internal surface, thus ensuring purity of product. Optimum and Continuous vacuum maintenance during process. Uniform material shuffling over the heated contact surface of the cone.

Ribbon blender/powder mixer mixes in 5minot 50100/25/500/1200kf ready  

• Material: Stainless Steel
• Voltage: 210-480 V
• Automation Grade: Automatic
• Temperature: 5 deg. C above ambient to 350 deg. C
• Frequency: 50-60 Hz

In the Food and Beverage industry various products require drying to ensure required shelf life. Food products require gentle drying to preserve the products original shape, color, taste & nutrients and for these applications freeze drying process is ideally suited. Some foods freeze dry very well, but not all food is suitable for freeze drying. Small fruits and vegetables can be easily freeze dried, whereas whole fruits and large vegetables would not be suitable, although they can be freeze dried if cut into small pieces first. This also applies to meat; small chunks of meat freeze dries well, but larger fillets need to be cut into pieces. Meat and seafood also require cooking before freeze drying. For some foods freeze drying is not cost-effective. Machinfabrik designs and manufactures freeze drying machines for sale worldwide. The process typical operating sequence of the freeze drying process is as follows:       Freezing of the product and freeze hold.   Cooling of ice condenser   Evacuation   Primary drying   Secondary drying