Electric Control Panels Dealers in Shilphata, Navi Mumbai

Supported by a well-organized network and dependable resources, we have developed as a reputed supplier of Flameproof Control Panel. Serialization is done before the final packaging and storing of the products in our capacious warehouse. We keep the products separated to ensure rapid delivery in the committed time span.   Specifications : Power Rating : Variable Phase : Single Phase / Three Phase Frequency : 50 Hz Material of Construction : Aluminum LM6 Type of Protection : Flameproof Ex'd. Zone classification : Zone 1 & Zone 2. Gas Group : IIA,IIB, T6. Fault Indication : LCD/LED. Dimensions : as per Requirement. Usage : Motor Control , Drive Control , Power Control.

• Phase: Single Phase
• Output Voltage (V): 230V - 440V
• Frequency (Hz): 50 - 60 Hz
• Mounting Type: Floor Mount
• Automatic Grade: Automatic
• Rated Current (A): 10A - 1500A
• Input Voltage (V): 220 - 240 V
• IP Rating: IP54

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

• Color: White
• Usage/Application: Industrial
• Brand Name: Tan Swa
• Material: Refineries Instrumentation Panels
• Frequency Range: 50 Hz
• Voltage: 220 V

Instrumentation Panels for Refineries  are generally controlled from single point for end to end processes used in various systems and downstream production lines of refineries. These refinery instrumentation panels are used in lubricants, low temperature distillates and coal tar. Various kinds of signals (feedbacks) from the entire plant are transferred and communicated to this refinery instrumentation panels which are displayed on the control panel, with the help of annunciators or mimic or p. C. Monitors and operator gets a glance of entire process. As a manufacturer we have supplied our products to various industries located in various states including gujrat, maharashtra, m. P. Rajasthan and various cities such as mumbai, navi mumbai, midc dombivali, kalyan, ambernath, thane, pune, mahad, ttc mumbai, roha, goa, bangalore, delhi & also export to australia, austria, bangaladesh, brazil, china congo, dubai, indonesia, iran, israel, nigeria, oman, portugal, qatar, russia, saudi arabia, sharjah, singapore, south africa, sri lanka usa, vietnam, yemen and zambia. We are an approved vendor of uhde india

• Width: 1000mm

It can give you multiple benefits including applying it over the roof as well as under roof insulation. The process of applying insulation material is comparatively easy as most of the housing roof as well as industrial ceilings have some access for caring insulation work. Apart from temperature or thermal insulation and upholding your premises or industry in better climate condition in higher temperature, low cost is another advantage why the popularity of roof insulation is increasing. One can apply as much as insulation to make it thicker and more thermal barrier as there are very little difference on the overall cost. Apart from temperature conversation and heat resistance, roof insulation material also gives helping hand to your pocket. It also saves money because every bit of loss in temperature can result into to higher energy consumption and higher expense.

  programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise,less effect of vibration,can work in dusty conditions and extended temperature range.

With the support of our competent procurement teams, we source and export a quality range of Electrical Panels. Using advanced and modern technology, these panels are manufactured from high quality factor inputs under the supervision of our experienced team of professionals. To get maximum satisfactions of our clients, our offered panels are tested with all quality parameters of the international standards. These panels are highly useful to avoid short circuit or overload. Apart from this, our offered panels are widely appreciated for their excellent features like durability, sturdy construction and reliability. With the help of our professionals, Dewdry Industries is capable in offering an exclusive array of Dehumidifier Control Panel. Offered panels are designed & developed by the experts in complete compliance with the international quality standards. Apart from this, these panels are strongly constructed to prevent damages and all useless electrical defaults. Available with us in various designs, these panels are highly known for their durability and sturdy construction. We offer these panels at effective rates. Features: Excellent performance Durable Low power consumption

We are manufacturer and supplier of PCC Panel. We offer PCC panels which are used for diverse industrial applications and provide reliable and effective service. With best usage and productivity, these offer high controllability and also available at market leading prices.We offer superior quality PCC Panel to control power production and distribution.     Features :-  Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply . They will be installed indoors and will work efficiently up to an ambient temperature of 50°C. All doors will be suitably labeled and marked for convenience of operation & maintenance.  Construction :- Type: Single /double sided.Modular design, free standing and will have fixed or draw out type executions as many be desired. Finish:The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. Bus Bars: Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal Wiring:Wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus:Bus Bars will be running all along the board. Switch Gears/ Components Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. Standards:Our Panels confirms to the standards such as, IS 4237; IS 8623; IS 375    

Control Panel for EOT cranes manufactured by Silverline Metal Engineering Pvt. Ltd. are used to facilitate crane drivers in smooth operations of cranes during various operation.

• Ratings range: 63A up-to 400A

Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections. Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections.

• Type: Electrical Panel
• Shape: Rectangle
• Certification: ISO 9001:2008
• Frequency: 50Hz, 60Hz
• Connection Type: 4 Way

We are the main supplier of this product.

We are well known manufacturers as we deal with electrical devices that are immensely important in the day to day industrial life. They are fabricated in such a manner that they impart all the functional properties in a definite manner. The very appearance of it is installed with various technical arenas but they are offered by us with elaborated manuals that are very easy to understand. The very purpose of this panel is to contribute to the ongoing work without fail. Features: Elaborated version. Precise make. Good quality.

We manufacture, supply and export a complete range of Control Panels. Fabricated using high grade components, these control panels strictly conform to the international quality standards.

Type tested to conform to leading Global Product Standards. (IEC-61439-1 & 2). Fully Compartmentalized (Form IV) Design. Drawout modules are simply pushed in for withdrawal, ensuring smooth & tool-less operation. Drawout modules plug-in directly on to Vertical Bus Bar, minimizing maintenance issues. Vertical Bus is Joint-free along the feeder area, therefore is highly reliable. Safety shroudshutter providing IP 20 levels of segregation upon withdrawal. Shock-free operation with Double Stab-in earthing in all Drawout modules. Fully Bolted Modular Structural design. Drawout Modules have interlocks for Test, Service & Isolated positions. Drawout Modules available in 3 Pole for Starter feeders & 4 Pole for Power feeders.

It is Metal clad type & having type tested design suitable up to 400KV switchyards It is equipped with Siemens, Areva & CSPC protective relays along with MIMIC presentation.

• Phase: Three Phase
• Material: Mild Steel
• Voltage: 220-440 V
• Finishing: Coated
• IP Rating: IP 44
• Frequency: 50-60 Hz

Tables, Aluminium, Electric fan guard

We are one of the well established supplier a wide range of Crane Control Panels

Led Fluorescent Lights, Electronic overload relay

Automation Products, Plastic Machine controller, plc automation system

M.C.C Motor Control Panels, Painting Turnkey Contractor

Furnaces, Ovens, Fan Arm Parts

electrical control pannel

AC Drive > MFDDTB3A2 (5KW), DC Drives, mcc, Pcc

Variable Frequency Drive Control Panel, BMS Automation

Electrical Items, ht switchgear

Electronic Instrument, lt control switch

Transformers