Electric Control Panels Dealers in Ttc Industrial Area, Navi Mumbai

• Phase: Three Phase
• Material: Mild Steel
• Voltage: 220-440 V
• Finishing: Coated
• IP Rating: IP 44
• Frequency: 50-60 Hz

Our loading docks to load and unload goods from trucks are well-maintained by the professionals; with a completely automated warehouse that is sternly supervised. Thus, we make sure that products are kept safely. Our organization is avidly engaged in supplying an exclusive range of Low Tension Control Panel at reasonable prices. These Low Tension Control Panels have a sturdy body with easy to use operational buttons and a long service life.

• Phase: Single
• Cabinet Material: Mild Steel
• IP Rating: IP 44
• Cable Entry: Back side
• Current (A): 100
• Frequency (Hz): 50
• Mounting Type: Floor Mounted
• Output Voltage: 240V
• Grade: Automatic
• Voltage: 220V
• Power (kW): 10

In industry, most of the load is inductive in nature which results in lagging power factor that is why there are loss and wastage of energy which results in high power bills and heavy penalties from electricity boards. If the load is uneven it is very difficult to maintain unity power factor. To overcome this difficulty apfc panel is used which maintains unity p.f. Features and applications : 1) high speed power factor correcting system is designed to compensate the reactive power of any load or equipment required p.f. Correction within one cycle of operating frequency or time delay of 30 sec to 5 min after command signal from apfc controller. 2) renders the distribution network more stable since there is no contactor switching causing high voltage transients, spikes, harmonics and other disturbances by applying zero crosses over voltage switching on and zero current switch off of the capacitors. 3) prevents voltage drop and flickering reduces failures in highly sophisticated electronic equipment like plcs. Computers and other control systems. 4) helps in reducing maximum demand and rkvah consumption hence a substantial reduction in monthly electricity tariffs. 5) it is highly suitable for spot welding applications where the reactive energy is to be compensated for a short period of 200 msec or less and for a number of times in a second. 6) accurate power factor control even in the presence of harmonics.

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

• Ratings range: 63A up-to 400A

Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections. Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections.

Type tested to conform to leading Global Product Standards. (IEC-61439-1 & 2). Fully Compartmentalized (Form IV) Design. Drawout modules are simply pushed in for withdrawal, ensuring smooth & tool-less operation. Drawout modules plug-in directly on to Vertical Bus Bar, minimizing maintenance issues. Vertical Bus is Joint-free along the feeder area, therefore is highly reliable. Safety shroudshutter providing IP 20 levels of segregation upon withdrawal. Shock-free operation with Double Stab-in earthing in all Drawout modules. Fully Bolted Modular Structural design. Drawout Modules have interlocks for Test, Service & Isolated positions. Drawout Modules available in 3 Pole for Starter feeders & 4 Pole for Power feeders.

We are well known manufacturers as we deal with electrical devices that are immensely important in the day to day industrial life. They are fabricated in such a manner that they impart all the functional properties in a definite manner. The very appearance of it is installed with various technical arenas but they are offered by us with elaborated manuals that are very easy to understand. The very purpose of this panel is to contribute to the ongoing work without fail. Features: Elaborated version. Precise make. Good quality.

We manufacture purge panels for • combustible dust: zone 21 & zone 22 as per iec600079-2 combustible dust: class ii, division 1 & division 2 as per nfpa 496 • hazardous gases vapours: zone 1 & zone 2 gas group- iia, iib, iic as per iec600079-2. Hazardous gases vapours: class i, division 1 & division 2, gas group a, b, c &d as per nfpa 496. Salient features of our purge panels are: • atex ccoepesocimfr ul certified purging system • enclosure moc-ms powder coatedss-304 ss-316 • x-type z-type y- type purging system • no restriction on size of enclosure • vortex cooling option available • nema 4x variant available we have supplied over 300 purge panels for various applications and they are functioning without a single failure till now & our supplied panels not only working in in india but also in various countries like dubai, qatar, saudi arabia ksa, oman, abudhabi,kuwait and also in austria, germany, usa, australia, sri lanka, singapore, malaysia, vietnam, indonesia, india, nigeria, china, south korea, bangladesh, zambia, kazakhstan, uzbekistan, north africa, moroco etc…

The Power Command Control is a microprocessor based generator set monitoring, metering, protection and control system. It offers advanced levels of functions for reliability and optimum genset performance.The power command control with digital paralleling control devices such as synchronizers and load sharing controls, and KVAR / Power factor controls.         Vesta Engineering is a Mumbai based company. Presently engaged in design, manufacturing & supply and installation of power panels, control panel, feeder pillars etc.         Manufacturers & suppliers of electrical Control Panels that include PLC Panel, AC Drive Panel, DC Drive Panel, LT Panel, PCC/MCC Panel, APFC Panel, AMF Panel, Generator Control Panel.       We manufacture and supply our high-quality products to cater to our client's requirements.     Our panel boards are made under strict supervision by qualified personnel. Very strict quality control is exercised on the production lines while the components and other raw materials used are of the best quality available   Its Types     1. A.M.F Control Panel 6. PCC Control panel Control (PCC)     2. Synchronizing Panel 7. ACB Panel     3. D.G. Set STD Control Panel 8. APFC Panel     4. Power Dist. Board (PDB) 9. MCC Panel     5. Change Over Panel Boards 10. RELAY Panel

Control Panel for EOT cranes manufactured by Silverline Metal Engineering Pvt. Ltd. are used to facilitate crane drivers in smooth operations of cranes during various operation.

Crane control panel In our extensive range of products we are presenting our clients a complete range of crane control panels. these are widely applicable in linearly accelerated starting.

We are well known manufacturers as we deal with electrical devices that are immensely important in the day to day industrial life. They are fabricated in such a manner that they impart all the functional properties in a definite manner.

With the support of our competent procurement teams, we source and export a quality range of Electrical Panels. Using advanced and modern technology, these panels are manufactured from high quality factor inputs under the supervision of our experienced team of professionals. To get maximum satisfactions of our clients, our offered panels are tested with all quality parameters of the international standards. These panels are highly useful to avoid short circuit or overload. Apart from this, our offered panels are widely appreciated for their excellent features like durability, sturdy construction and reliability. With the help of our professionals, Dewdry Industries is capable in offering an exclusive array of Dehumidifier Control Panel. Offered panels are designed & developed by the experts in complete compliance with the international quality standards. Apart from this, these panels are strongly constructed to prevent damages and all useless electrical defaults. Available with us in various designs, these panels are highly known for their durability and sturdy construction. We offer these panels at effective rates. Features: Excellent performance Durable Low power consumption

• Size: 500 X 500
• MOQ: CRCA Sheet
• Usage: Indoor & outdoor Application

We design & manufacture all kind of Electronics panel

• Type: Electrical Panel
• Shape: Rectangle
• Certification: ISO 9001:2008
• Frequency: 50Hz, 60Hz
• Connection Type: 4 Way

We are the main supplier of this product.

This motor control center panels is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled.    Features :- Simplex & Duplex pattern. Degree of Protection :-IP-52 to IP-65. Painting: - Powder Coating / Spray Paint / Epoxy Paint. Compartmentalized design eliminates risk to maintenance personal. Sufficient space for incoming and outgoing cables. Provided with buzzer & hooter during emergency. Separate Bus bar and cable chambers. Motor Control Center shall have hinged door with lockable arrangement. Motor Control Center shall have detachable gland plates of 2-3mm thick. Motor Control Center Available with Aluninium / copper bus bar. Fabricated with 2/2.5/3mm CRCA sheet steel. Motor Control Center is suitable for use on 415V, 3Phase, 4 wire, 50H.z    Application :-   These are widely used for :- »  Protection against electrical Short Circuit, overload and earth fault of the system. »  Control & monitoring of the entire electrical system of an industry / plant. »  Systematic power catering to various load of an electrical system. »  Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open –cast mines, shopping 

• Width: 1000mm

It can give you multiple benefits including applying it over the roof as well as under roof insulation. The process of applying insulation material is comparatively easy as most of the housing roof as well as industrial ceilings have some access for caring insulation work. Apart from temperature or thermal insulation and upholding your premises or industry in better climate condition in higher temperature, low cost is another advantage why the popularity of roof insulation is increasing. One can apply as much as insulation to make it thicker and more thermal barrier as there are very little difference on the overall cost. Apart from temperature conversation and heat resistance, roof insulation material also gives helping hand to your pocket. It also saves money because every bit of loss in temperature can result into to higher energy consumption and higher expense.

It is Metal clad type & having type tested design suitable up to 400KV switchyards It is equipped with Siemens, Areva & CSPC protective relays along with MIMIC presentation.

Fatek Automation Corp., Made FBs –Series Programmable Logic Controller Offers Ultra High Performance in Micro PLC range in the Industry 4-Axes motion control with 200KHz Pulse trains and specially designed instructions and functions ease the PLC for motion control. Supports 2-axes Linear Interpolation & Dynamic tracking function 4-Channel 200KHz High Speed pulse counter and interupt function for encoder feedback Can handle upto 512 I/O’s Option for RS232, RS422, RS486, USB and Ethernet communication Wide range of option modules for the expansion of Inputs, Outputs and communcation Scan Time: .33mirco Sec/Seq. Instruction Compact, Reliable, Powerful and easy program Program Capacity: 20kWords & RTC onboard Larsen & Toubro Made LN-Touch series – Human Machine Interface Screen Size: 4.3” / 5.7” / 7” / 8.4” / 10.4” / 12.1” / 15” (Inchs) Display: TFT 65,536 Color SInterface : Color Graphical with Analog Touch Communication: Serial RS232 /485 /422 /Ethernet /Profibus /CC Link Etc Operating Temperature : 0~50 Deg Celsius Operating Voltage: 24VDC (20-28V) Program Download: USB (as Standard), Ethernet, RS232 Special Functions: Data Logging, Recipe, Pass through, Recorder, Barcode reader, Roll printer, Security Setting, Graphic Library, Windows Font, Script Software: LN-touch soft (User friendly windows based HMI program development environment for LN-touch)

  programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise,less effect of vibration,can work in dusty conditions and extended temperature range.

Electrical Control Panels, LED Spot Lights, Led Fluorescent Lights

Single Phase Elevator Control Panel

Motor Control Center Panel is designed to meet a specific requirement of controlling electric motor. All the working parameters of an electric motor are taken into account while designing Motor Control Center Panel. An automated or manual control are fitted onto the Motor Control Center Panel to stop or start a motor, to regulate speed, to have reverse or forward alternation, to regulate the power and to prevent the electric motor from the hazards of overloads.Highlights : Highly efficient Easy-to-operate Automated or manual controls Prevent from hazardous overload situations

Electrical Panel, Single Girder EOT Crane, Hook Block, Rope Drum

Auto Change Over Panel Board

Relay Panel

We are supplying products like as Electrical Control Panels

Lt Distribution Panel, Electrical Equipments, electrical feeder pillars

panel board accessories, Copper Bus Bars, panel board, Starter