Electronic Test Instruments Dealers in Airoli, Navi Mumbai

OVERVIEW : Moisture meters are used to measure the percentage of water in a given substance. This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection. Wood and paper products are very sensitive to their moisture content. Physical properties are strongly affected by moisture content. Dimensioning also changes with moisture content. Microprocessor based pocket type Moisture meter with LCD display and rugged housing so that the pins on the end of the instrument can be pressed into the material to be measured. FEATURES : -> Mainly used for measuring moisture content of Paper, Paper Board, Wood, Timber. -> It is portable, compact, easy to use and the moisture measurement reading are instant. -> Digital display with back light gives exact and clearly reading although you stay at the sober conditions. -> It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient. -> The moisture meter operates by electrical resistance and has automatic temperature compensation. -> Manual off at any time, auto power off after 5 minutes from last operation. Specification : -> 4 digital LCD -> Measuring Range : 0-80 % -> Humidity : 5 % -90 %RH -> Resolution : 0.1 -> Accuracy : + 0.5 % n -> Operation : Electrical Resistance Method, Automatic temperature compensation. -> Power Supply : 4 x1.5 AAA Size (UM-4) battery -> Dimensions : 140mm x 60mm x 22mm -> Weight : 175 g (not including batteries)

• Usage/Application: HbA1C Analyzer

• Material: SS .
• Display: LCD
• Country of Origin: Made in India
• Dimensions: L 385 x W 305 x H 245 mm
• Net Weight: 50 kg Without Sieves
• Model Name/Number: QCCL/ESS/01
• Measurement Range: 8 Sieve

• Usage: Laboratory,Industrial
• Current: 2 A
• Outside Dimension: 800 x 500 x 750 mm
• Voltage: 220 V +/- 10%
• Frequency: 50 Hz
• Weight: 140 kg
• Brand Name: Aadarsh

• Display: 16 x 1 line LCD display.
• Supply Voltage: 230V AC.
• ZIF: 24 pin DIP ZIF sockets, Keys: 16 keys.
• Test by: Truth table/sequence table comparison.

It can test more than 300+ ICs It tests a wide range of Digital IC's such as 74 Series, 40/45 Series  

Gloss meter Supplier in India We are complicatedly engaged in offering a commendable range of Gloss Meter. Besides being manufactured from high-grade raw material and latest technology, the offered chamber is inspected properly by our expert professionals. Owing to features like durability and sturdiness, the offered range is exceptionally valued by our precious clients. The offered chamber is available with us in various sizes and shapes at affordable price.

Salient Features 20MHz at 5mV, for each channel. X-Y operation at 5 mV sensitivity. 200 mV peak-to-peak calibrator. Dual triggering, component testing facility & trace rotation.  

• Type: Portable pH-Conductivity Meter

Main Features: ●Large LCD screen with controllable white backlight. ●Humanized designs like rack and skid proof shell make it more convenient for users. ●Double-parameter and equipped with pH electrode and conductivity electrode, can recognize electrode automatically. ●Built-in microprocessor chip with functions of auto calibration, auto temperature compensation, data storage, function setup, self-diagnosis, auto power off, low voltage display. ●Auto recognition of standard pH buffers and there are three series of standard buffers for option: USA, NIST and China. ●Able to set pH measurement modes of high purity water and pure water with ammonia. ●Auto recognition of 8 standard conductivity buffers and there are two series of standard buffers for option: USA series, China series. ●Adopt advanced conductivity measurement technology, one point calibration of conductivity electrode can meet the measuring accuracy requirements for test 0.5μ S/cm ~ 200mS/cm. ●Able to switch between conductivity, TDS, salinity and resistivity multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale. ●Conductivity mode has the function of non-linear temperature compensation for high purity water.   ●IP57 and equipped with calibration solution and carrying case.

A Conductivity Meter measures the electrical conductivity in a solution. Commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water. This instrument is ideal for testing liquids like natural water, drinking water, treated water, waste water, brine solution, sea water and soluble salt content in liquids.

Bourdon Tube Pressure Gauge, Bourdon Tube Pressure Gauge

• Type: Regulator
• Material: Mild Steel
• Application: Hospital, Industrial
• Gas Type: Oxygen
• Pressure: 10-15 Bar
• Power: 220 Watt (w)
• Supply Ability: 13 Piece Per Day
• Operating Pressure: 5 0 50 DEG
• Display Type: Analog

• Technical Specifications: Rated Voltage of Battery to be Tested : 2, 6, 12V DC,Rated Capacity of Battery to be Tested : 2 - 200Ah Etc.

MECO ABM18 is a portable Automobile Battery Tester which can check the capacity condition of different types of Motorcycle and Motorcar batteries from 2 to 200Ah. The product consists of a DC Voltmeter, Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.

Model, Input Voltage, Input Current, Input Frequency, CTR PTR (if any), Auxiliary Supply, Accuracy Class and Display Digit Height

• Weight: 1 oz (30 g)
• Temperature Range: 14 to 122°F (-10 to 50°C)
• Temperature Accuracy: ±4.5°F (±2.5°C)
• Memory Size: 4080 readings

The compact design of the DW-USB Series data loggers allows the user to monitor temperature, humidity, dew point, voltage, or current almost anywhere. The user can select the sampling rate, start time, highlow alarm settings, and temperature unit parameters with easy to install Windows® based software. Stored data is downloaded by simply plugging the module into a PC's USB port with no cable required. Alarm status and low battery is indicated via built-in flashing LED's. When the protective cap is fitted, the data logger resists moisture to IP67 standards. These features make the data logger ideal for calibration labs, pharmaceutical plants, environmental chambers, and storage warehouses. See less Temperature Range: 14 to 122°F (-10 to 50°C) Temperature Accuracy: ±4.5°F (±2.5°C) Temperature Resolution: 2°F (1°C) Memory Size: 4080 readings Sampling Mode: Continuous Sampling Rate: 30 min (fixed) Computer Requirements: Windows® 98, Windows® 2000, Windows® XP, and Windows Vista® (software included) Power Requirements: 3 V CR1620 lithium metal battery, installed non-functional, user replaceable Alarms: Programmable highlow Interface: USB Weight: 1 oz (30 g) Agency Approvals: CE

Features PROCESS, VOLTAGE, CURRENT, TEMPERATURE, AND STRAIN GAGE INPUTS 5-DIGIT 0.56" RED SUNLIGHT READABLE DISPLAY VARIABLE INTENSITY DISPLAY 16 POINT SCALING FOR NON-LINEAR PROCESSES PROGRAMMABLE FUNCTION KEYS/USER INPUTS 9 DIGIT TOTALIZER (INTEGRATOR) WITH BATCHING OPTIONAL CUSTOM UNITS OVERLAY W/BACKLIGHT FOUR SETPOINT ALARM OUTPUTS (W/OPTION CARD) COMMUNICATION AND BUS CAPABILITIES (W/OPTION CARD) RETRANSMITTED ANALOG OUTPUT (W/OPTION CARD) CRIMSON® PROGRAMMING SOFTWARE NEMA 4X/IP65 SEALED FRONT BEZEL

• Brand Name: Contech
• Display Type: Digital
• Type: Digital
• pH Range: 1. 68ph, 4. 00ph, 4. 01ph, 6. 86ph, 7. 00ph, 9. 18ph, 9. 20ph. 10. 01ph and 12. 45ph
• Model Name/Number: CPH-102 & CPH-103
• Type of PH Meter: Table-Top, Portable
• Usage/Application: Industrial
• Data logging interval: 5s, 10s, 20s, 30s, 1m, 2m and 5m
• Memory storage: 100 ph

We are offering battery tester. Meco battery capacity tester bt 63 is designed to check capacity condition of different types of battery ranging from 4 ah to 500 ah and having 2, 6 and 12 v dc batteries. Meter dial has 3 different colors for 2, 6 and 12 v dc. The battery tester bt 63 gives results in 3 seconds. the battery capacity tester bt 63 is ideal for the industries such as battery industry, ups industry, automobile industry, solar system industry, wind energy solution providers and crane and fork lift industry and many other industries where batteries are used. For manufacturers, service centers, technicians, dealers and service executives of these industries meco battery capacity tester bt63 provides unique solution to check capacity of battery instantaneously. As the battery tester bt 63 is designed by considering the problems faced by people on the field in these industries while caring, handling and using the testers for checking batteries available in the market today. The battery tester bt 63 is available in indian market through our authorized dealer network. technical specifications :- rated voltage of battery to be tested : 2, 6, 12v dc rated capacity of battery to be tested : 4 - 500ah dimensions : 220 x 120 x 70mm (approx.) weight : 560gms (approx.)

• Model: AM-E-TDS1
• Temperature: 0-90 degree C
• Body material: Glass
• Model: AM-E-TDS1
• Size: 155×12 (mm)
• Cable: 1 m

• Power supply: 90 to 270 VAC
• Inbuilt transmitter: 24 DC supply

Pressure recorders its terminator MTR Series Circular Chart Recorders for recording & monitoring of process parameters like Temperature humidity, Pressure Vacuum, flow & pH Graph size available 6”, 9” and 11” & Model MW 600, MTR 900, MTR 1000, in 1 or 2 Pen continuous marking. It is micro controller based unit and stepper motor driven pen & chart Movement.

• Frequency: 45-65 Hz
• Display Type: 7 Segment LED
• Display Configuration: 1 Line 4 Digits to show Power Factor
• Input Type: 2Ø-2 Wire, 1Ø-2 Wire
• Measurement Range: Power Factor: 0.8 to -0.8
• CT Primary: 1/5A to 9999A (Programmable for any Value)
• CT Secondary: 1 or 5 A (Programmable)
• Accuracy: Power Factor: ±0.01
• Max Number of Steps: 8
• Communication Protocol: NA
• Supply Voltage: 90 to 550V AC
• Bezel Size: 144 x 144mm
• Mounting Type: Panel Mount

• Power: 220V
• Display Type: DIGITAL
• Brand: HIMAX
• Measuring Range: 0.1NM TO 9.80NM
• Usage/Application: Industrial
• Model Name/Number: RT10 RT100

• Features: Premium quality,Anti corrosive, High consistency

The equipment is semiconductor aging testing equipment to full-automatically execute burn-in processing and data measurementjudgmentanalytical processing and also has tester function as well as temperature accelerating testing.

We are offering humidity data logger. Fast response time (0.1 min) windows compatible software, data downloading & presentation, in-built memory, flameproof box available, multiple communication modes

RH Temp Data Logger, Air Capture Hood, VOC Gas Analyzer

Battery Impedance Tester, Air Velocity Transducer

battery operating indicators, sensor rtd, Recorders, Infrared Sensor

Prepaid Gas Meter

Low Temperature Loggers Data Logger, Media Preparator

Flow Meter, Anaesthesia Rotameter, Emergency Oxygen Unit, Low Flow Rotameter