Electronic Test Instruments Dealers in Ttc Industrial Area, Navi Mumbai

A Conductivity Meter measures the electrical conductivity in a solution. Commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water. This instrument is ideal for testing liquids like natural water, drinking water, treated water, waste water, brine solution, sea water and soluble salt content in liquids.

Salient Features 20MHz at 5mV, for each channel. X-Y operation at 5 mV sensitivity. 200 mV peak-to-peak calibrator. Dual triggering, component testing facility & trace rotation.  

• Applications: Solar Power Plant,Windows performance - calculate the rate of daylight penetration Physics and optical laboratories Etc.

This instrument is designed to measure Solar Power in the range from 400 to 1100 nanometers. The good Spectral Range, Orientation and Angular detection of meter allow users to conduct the most precise quantitative measurements of Solar Power Radiation Solar Power Measurement with Orientation and Tilt Angle Easy measurement for rate of daylight penetration Auto change for measuring range Auto power off with disable function Instantaneous display AveMinMax values 20 points memory Socket of tripod mounting Magnetic mount Backlit LCD and 4 digits triple display

We are offering best DIGITAL PANEL METERS

• Weight: 1 oz (30 g)
• Temperature Range: 14 to 122°F (-10 to 50°C)
• Temperature Accuracy: ±4.5°F (±2.5°C)
• Memory Size: 4080 readings

The compact design of the DW-USB Series data loggers allows the user to monitor temperature, humidity, dew point, voltage, or current almost anywhere. The user can select the sampling rate, start time, highlow alarm settings, and temperature unit parameters with easy to install Windows® based software. Stored data is downloaded by simply plugging the module into a PC's USB port with no cable required. Alarm status and low battery is indicated via built-in flashing LED's. When the protective cap is fitted, the data logger resists moisture to IP67 standards. These features make the data logger ideal for calibration labs, pharmaceutical plants, environmental chambers, and storage warehouses. See less Temperature Range: 14 to 122°F (-10 to 50°C) Temperature Accuracy: ±4.5°F (±2.5°C) Temperature Resolution: 2°F (1°C) Memory Size: 4080 readings Sampling Mode: Continuous Sampling Rate: 30 min (fixed) Computer Requirements: Windows® 98, Windows® 2000, Windows® XP, and Windows Vista® (software included) Power Requirements: 3 V CR1620 lithium metal battery, installed non-functional, user replaceable Alarms: Programmable highlow Interface: USB Weight: 1 oz (30 g) Agency Approvals: CE

We are offering battery meter. features- affordable, portable and compact, know capacity of battery in 3 seconds meco battery tester abt 18 is designed to check capacity condition of different types of batteries ranging from 2 ah to 200 ah and having 2, 6 and 12 v dc. The 'full' (white), 'normal' (green), 'recharge' (yellow), 'discharged' (red) are directly indicated on the meter dial, so as to check the quality of the battery visually and rapidly. The tester can also check the quality of various types of electric switch, such as headlamp switch, tail lamp switch, relay switch, starting switch etc. A reference plate attached to the front panel of the tester, for customer's reference, indicates the relations between the cylinder capacity of different car engines and the specifications of the battery required. The battery tester abt 18 gives results in 3 seconds. the battery capacity tester abm 18 is ideal for the industries such as automobile industry, battery industry, ups industry, solar system industry, wind energy solution providers and crane and fork lift industry and many other industries where batteries (upto 200ah) are used. For manufacturers, service centers, technicians, dealers and service executives of automobile industry meco abm 18 provides unique solution to check capacity of battery instantaneously. As the battery tester abm18 is designed by considering the problems faced by people on the field in these industries while caring, handling and using the testers for checking batteries available in the market today. the battery tester abm 18 is available in indian market through our authorized dealer network. technical specifications :- rated voltage of battery to be tested : 2, 6, 12v dc rated capacity of battery to be tested : 2 - 200ah dimensions : 210 x 124 x 68mm (approx.) weight : 490gms (approx.).

The equipment is semiconductor aging testing equipment to full-automatically execute burn-in processing and data measurementjudgmentanalytical processing and also has tester function as well as temperature accelerating testing.

Features PROCESS, VOLTAGE, CURRENT, TEMPERATURE, AND STRAIN GAGE INPUTS 5-DIGIT 0.56" RED SUNLIGHT READABLE DISPLAY VARIABLE INTENSITY DISPLAY 16 POINT SCALING FOR NON-LINEAR PROCESSES PROGRAMMABLE FUNCTION KEYS/USER INPUTS 9 DIGIT TOTALIZER (INTEGRATOR) WITH BATCHING OPTIONAL CUSTOM UNITS OVERLAY W/BACKLIGHT FOUR SETPOINT ALARM OUTPUTS (W/OPTION CARD) COMMUNICATION AND BUS CAPABILITIES (W/OPTION CARD) RETRANSMITTED ANALOG OUTPUT (W/OPTION CARD) CRIMSON® PROGRAMMING SOFTWARE NEMA 4X/IP65 SEALED FRONT BEZEL

• Brand Name: Contech
• Display Type: Digital
• Type: Digital
• pH Range: 1. 68ph, 4. 00ph, 4. 01ph, 6. 86ph, 7. 00ph, 9. 18ph, 9. 20ph. 10. 01ph and 12. 45ph
• Model Name/Number: CPH-102 & CPH-103
• Type of PH Meter: Table-Top, Portable
• Usage/Application: Industrial
• Data logging interval: 5s, 10s, 20s, 30s, 1m, 2m and 5m
• Memory storage: 100 ph

• Power supply: 90 to 270 VAC
• Inbuilt transmitter: 24 DC supply

Pressure recorders its terminator MTR Series Circular Chart Recorders for recording & monitoring of process parameters like Temperature humidity, Pressure Vacuum, flow & pH Graph size available 6”, 9” and 11” & Model MW 600, MTR 900, MTR 1000, in 1 or 2 Pen continuous marking. It is micro controller based unit and stepper motor driven pen & chart Movement.

• Frequency: 45-65 Hz
• Display Type: 7 Segment LED
• Display Configuration: 1 Line 4 Digits to show Power Factor
• Input Type: 2Ø-2 Wire, 1Ø-2 Wire
• Measurement Range: Power Factor: 0.8 to -0.8
• CT Primary: 1/5A to 9999A (Programmable for any Value)
• CT Secondary: 1 or 5 A (Programmable)
• Accuracy: Power Factor: ±0.01
• Max Number of Steps: 8
• Communication Protocol: NA
• Supply Voltage: 90 to 550V AC
• Bezel Size: 144 x 144mm
• Mounting Type: Panel Mount

• Power: 220V
• Display Type: DIGITAL
• Brand: HIMAX
• Measuring Range: 0.1NM TO 9.80NM
• Usage/Application: Industrial
• Model Name/Number: RT10 RT100

• Feature: Long lasting , Non-interrupted functionality , User-friendly interface

offers the perfect choice of a bench -top conductivity meter for measurements in the laboratories - whether routine or at r & d level. the conductivity meter offers better operating comfort and measuring confidence in all areas of application. due to user selective temperature function, instrument calculates the conductivity at the reference temperature 25 +/- 0.1°c with linear function. conductivity is an important factor in water analysis for quality of drinking water, direct ionic concentration measurement in pharmaceutical preparations, waste water treatment plants, pollution control in lakes & rivers, boiler feed water and oceanography to determine salinity and tds. features • advanced micro controller based user-friendly state-of-the-art design. • complies with usp and din standards. • sleek moulded cabinet with alphanumeric splash waterproof polyester keyboard with soft keys. • user interactive software in dialogue mode for ease of operation with protection against invalid entries. • 20 x 2 line back lighted lcd display. • measurement modes: conductivity, tds, salinity (optional) and temperature. • simultaneous measurement of conductivity and temperature. • non-volatile memory storage of conductivity, tds and salinity - 40 readings each with temperature in pre-selected glp or non-glp format. • password protection for calibration data and stored readings. • calibration data with date stamp for authentication. • calibration reminder alarm. • alphanumeric entries of sample name, identification number for authentication. • automatic range selection for faster measurement from 0.01μs to 199.9ms with conductivity cells having constants 0.1, 1.0 and 10 k. • automatic evaluation of cell constant with standard solution. • user selectable temperature coefficient for automatic temperature compensation, through special tempco key. • input stability indicator for reproducible results. • built-in-real time clock (rtc) for time display and on report printout. • factory entered customer name on report printouts for authentication. • error indication helps user to trace the problem. • audible beep indication during valid key operation.   • pc compatibility for data downloading (optional) combined ph and conductivity instrument is available

The specimen is clamped on a fixture and is pierced with the help of a pendulum released from 90 degree position.the pendulum head is made pointed in a pyramid shape. Different weights are provided in the pendulum for different scales. A pointer is fitted in the pendulum which gives the reading in a calibrated scale. Puncture resistance testing is used for all kinds of paper, paper-board, solid fiber boards & corrugated boards boxes.

• Application: HbA1C Analyzer

• Material: SS .
• Display: LCD
• Country of Origin: Made in India
• Dimensions: L 385 x W 305 x H 245 mm
• Net Weight: 50 kg Without Sieves
• Model Name/Number: QCCL/ESS/01
• Measurement Range: 8 Sieve

• Country of Origin: India
• Type: Digital Proton Magnetometer
• Certification: CE Certified
• Application: Industrial Use
• Colour: Titanium Dioxide IP
• Anti-ulcer: Proton pump inhibitor

ESCACID-40 (Pantoprazole Sodium 40 mg tablets) is an anti-ulcer medication which comes under the group of medications called Proton Pump Inhibitors (PPI). ESCACID-40 (Pantoprazole Sodium 40 mg tablets) contains the generic medicine Pantoprazole sodium 40 mg per tablet. Pantoprazole is a Proton Pump Inhibitor. Like other PPIs, Pantoprazole exerts its pharmacodynamic properties by binding to the proton pump (h+,k+ -adenosine triphosphatase) in the parietal cells of the stomach. ESCACID-40 is used to treat gastroesophageal reflux disease (gerd), healing of erosive esophagitis and zollinger-ellison syndrome. It produces faster pain relief, ulcer healing and greater efficacy in oesophageal reflux disease. Since it is having a lower affinity for cytochrome p-450 than other proton pump inhibitors, there is less chance for drug interactions with other drugs including carbamazepine, cisapride, cyclosporine, digoxin, warfarin, e.t.c. And it has been an added advantage for its use in patients. ESCACID-40 in longer use or higher doses may cause bone fractures and these can be prevented by the intake of calcium and vitamin d supplements. It is contraindicated in patients those who are hypersensitive to pantoprazole or to any other PPI and with severe liver problems. Recommended dose: one tablet of ESCACID-40 to be taken once daily for upto 8 weeks.

• Application: Laboratory,Industrial
• Current: 2 A
• Outside Dimension: 800 x 500 x 750 mm
• Voltage: 220 V +/- 10%
• Frequency: 50 Hz
• Weight: 140 kg
• Brand Name: Aadarsh

The moving coil PF meter used to monitor changing power factor condition on balanced load & unbalance system. The power factor is indirectly by measuring the phase angle Ø between current & voltage . However the indicators are calibrated in values of cos of the angle Ø. Knife edge pointer Glass filled polycarbonate housing Easily replicable glass and bezel Easy installation with swivel screws