Epoxy Coatings Dealers in Mahape, Navi Mumbai

KEM REPEL 111 is a ready to use all purpose colourless water repellent. Easy penetration to masonry substrates. Acts as a damp proof course when injected.

• Color: Red

CHO-SHIELD primer is an air-drying liquid coating for enhancing the adhesion of CHOSHIELD 2000 series electrically conductive coatings and CHOBOND 2165 to chemically treated aluminum, and most composite surfaces. Using CHO-SHIELD 1091 primer prior to application of the CHO-SHIELD 2000 series coatings CHO-BOND 2165 sealant ensures optimal adhesion to the substrate eliminating the possibility of re-work due to adhesion issues.

• Coverage: 8/10 m /kg/coat

pure acrylic liquid polymer modified with auxiliary agents to improve its deep penetration characteristics and sealing properties in existent porosities of concrete, sand lime bricks, cement mortars and concrete blocks.It is used as primer sealer on friable surfaces before the application of cement based coatings, paints and renders.

• Packaging Type: Plastic Drums
• Packaging Size: 250kg
• Material: HDPE
• Certification: ISO 9001:2008
• Shelf Life: 1Year
• Color: Colourless
• Form: Liquid
• Country of Origin: India

vitcon 2009 rainkote is a polymer based liquid. on application with simple brush or spray vitcon 2009 rainkote forms a thin elastomeric film covering all hidden cracks and porosity and shielding the wall from penetrating of water for several years. is unaffected by u.v. radiation ensuring longer life. though the film formed by this material is vapour permeable, but no water can penetrate through the film - essential requirement of any exterior coating. the film keeps fungi & algae away for few years. vitcon 2009 rainkote has a very good penetrating ability.applications:remove all lose particles, dust, growing moss and debris from the surface. wet the surfaceby spraying water & dry it. coat the material either by spray or brush. dipping process is idealfor impregnating bricks, roofing tiles. after coating or dipping a minimum 6-8 hour drying timeis required. within this period no water should come in contact with coated surface. to ensurebetter water proofing, 24 hours drying time is recommended.specifications: appearance: colourless liquid sp. gravity: 1.01 ± 0.02 ph value: 8 - 9 chloride content : nil shelf life: 12 months storage: under shade coverage:plastered surface: 18 - 20 square meter per literstrongly absorbent bricks: 8 - 10 square meter per literconcrete surface: 45 – 50 square meter per literpacking:vitcon 2009 rainkote is available in 35kg, 50kg and 240kg hdpe drums.safety:vitcon 2009 rainkote is non-toxic, non-flammable and non hazardous. however, any splash on the human body should be washed out immediately with plenty of water. local exhaust is recommended for enclosed area

• Color: Silver
• Application: Industrial Use
• Packaging Size: 450 ml
• Pack Type: Tin Bottle

Features of ZC 678 Anti corrosion Bright zinc coating ZC 678 Anti corrosion Bright zinc coating is Inhibits rust and corrosion on ferrous metals. Stops rust and corrosion on any iron or steel surface, Provides the appearance of a hot-dip galvanised, Highly resistant to scratching, denting, abrasion, corrosive environments, salt air, heat, moisture and road salts. Quick-drying Non-sagging touch-up of damaged galvanising Its galvanic action ensures better self-healing and sealing   Application of ZC 678 Anti corrosion Bright zinc coating Bright-Zinc is the original metallic silver colour zinc-rich coating that has been used on towers, power generators, farms, fencing ,Air conditioning equipment / ducts, satellite, antennas. It is used as an anti rust primer on vehicle bodies.It forms a protective coating on welded and drilled section. Used in Marine works and ship manufacturing parts and repairing. also used in heavy equipment, pipes, transformers, electrical poles, threads, welds, automobile, Metal chain fences, storage tanks etc. They are invaluable for use in : Construction Agriculture, Local authorities, Railway, Welding, transport, Automotive, Engineering,   Direction of ZC 678 Anti corrosion Bright zinc coating Surface should be dry and free of rust bloom. Shake well until agitator ball is free. Repeat while using. Best results are obtained when sprayed above 60º F. Spray from 12-15 inches away in light, even coats. The optimum film thickness for Bright Zinc is 1.5 to 3.0 mils of dry film. To obtain this thickness via aerosol application, 3 passes of spray are required. Spray the substrate once vertically, once horizontally, and once more vertically for ideal coverage. Additional coats for heavy film can be applied when first coat is dry. For a thickness of 3 mils, repeat the above spray pattern twice. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes. If clogging occurs, remove button and clean slot and orifice with fine wire.   Precaution of ZC 678 Anti corrosion Bright zinc coating Contents are Extremely Flammable and Under Pressure. Do not punctured , may explode if heated. Do not apply while equipment is energised, Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Prevention : Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Pressurised container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source,live circuits. Harmful in contact with eyes. Prolonged exposure may cause chronic effects. May cause drowsiness and dizziness Response : IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.   Storage of ZC 678 Anti corrosion Bright zinc coating Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122 °F. Store in a well-ventilated place. Keep container tightly closed. Keep Out of Reach of Children.

Chembond Distribution Limited - We are a supplier of high quality range of industrial coating in India.

• Brand Name: Homesure
• SKUs: 200ML, 1Liter, 5Liter, 10Liter, 20Liter
• Nature: Brown Colour Liquid
• Specific Gravity At 27⁰c: 1.02 – 1.09
• Non-volatile Content, %: 12 - 15
• pH: 10 - 14
• Setting Time, Minutes. As Per Is 2645: 2003: Passes
• Water Permeability, % As Per Is 2645: 2003: Passes
• Compressive Strength, Mpa, As Per Is 2645: 2003: More than control
• Chloride Content, % As Per Is 2645: 2003: Nil

epoxy flooring chemicals, Lab Chemicals

• Classification: Self Dispersing, Self Levelling, Mortar Epoxy Coating
• Types: Solvent Based
• Brand Name: Metcon
• Usage/Application: Industrial Use
• Color: Any
• Coating Type: Eopxy
• Surface Finishing: Smooth

This is two pack coal tar epoxy coating for metal surfaces . It has good corrosion , abrasion and water resistance. Recommended Uses Ideally suitable for use in varied conditions for the protection of all types of metals especially for the substrates which are having marine exposure.

With our fully in-house setup as in Powder Coating and latest CNC machine, a dedicated team of programmers, designer, and operators work hard along with this state-of-the art machinery to offer complete solution to the customer.   With 23Ton of punching force, 500 x 500 part shoot, 2.5Meter without repositioning machine along with wide range of tooling we are able to achieve critical componets with high accuracy amd minimum leadtime. Moreover availablity of In-house powder coating plant boosts our efficency and provides our customer with full soluton under one roof.

Our range of coatings cover most industries from metals, marine, appliances, buildingsinteriors, automotive, construction etc. Our coatings are based on Alkyds, Epoxies and Polyurethanes. Alkyds - The range of Alkyd coatings possess special properties like low glass transition temperature and good wetting ability. They are also modified for different properties like enhanced appearance, good gloss retention, resistance to corrosion and excellent adhesion to a wide range of substrates like plastic, wood, metal, composites and urban industrial floors. These are attractively priced and the main polymers to be used in the paints and coatings industry. Epoxies - The range of environment friendly and easy to use epoxies provide extensive anti-corrosive treatment of metals and allied fittings. They are two- component, high solids coating with a fast drying ability thereby also allowing a faster recoat if so desired. They can be applied as a fresh or as a maintenance coating. They can be applied by air airless spray or brush and have very good resistance to abrasion, water, chemicals and solvents. Epoxies can also be used as primers to improve paint adhesion in the auto and marine industry and where protection against rust is important especially metal cans and containers. Polyurethanes - The range of polyurethanes provide an excellent recoatability and durable finishes for most environments. They can be applied as a fresh or as a maintenance coating on Glass, Metal, Wood, Plastics and urbanindustrial floors. They can be applied on a pre-primed surface by air airless spray, brush and have very good resistance to sunlight (UV), abrasion, water, chemicals and solvents.

• Features: Customized,Reliable,Durable,Optimum quality,Exceptional finish

Contractor for Blasting cleaning work, Civil Guniting Work and Epoxy Coating Work. specialist for Heavy industrial and Government project all over world providing contracting service from last fifteen years having done many construction project for reputed construction company

architectural coatings, Paints, chimney paints, chlorinated paints

heat seal coating, Industrial Chemical, ADHESIVE, Lamination Adhesives

Ceramic Coating, Colmonoy coating, stellite coating, Cnc Tools

aerospace coating, coating products, special coating paints