Filling Machine Dealers in Rabale, Navi Mumbai

• Type: Rotary Pad Printing
• Brand Name: Winner Screen Machines Pvt Ltd
• Material: SS

We are offering closures head printing machine. High speed fully automatic rotary pad printing machine suitable for printing up to three colors on top face of closures.speed of print up to 2000 caps per minute very high speed: 2000 closures per minute! up to 3 colours

• Automatic Grade: Automatic
• Material: Stainless Steel
• Installation Service: Yes
• Product type: Soda Water Plant
• Packaging type: Box

automatic powder filling machine offered by us is a fully automatic volumetric filling machine by auger for dry powders with very high consistency of weight control, which mars mech is already reputed for. Our automatic powder filling machine is suitable for microdosing sterile dry powders besides filling external dry syrup and other allied products. The system of automatic powder filling machine consists of independent dosing heads fitted with dedicated permanent magnet dc motors and feedback sensors or servo motors with inbuilt feedback encodes for accurate individual control of auger revolution. automatic powder filling machine, that we offer, is filled with an assembly of pre-feeding screw conveyors, hoppers and capacitive powder level sensors for maintaining optimum level of powder in the dosing chamber. The complete assembly facilitates ease of maintenance and changeover. The bottles/vials/containers of uniform size are fed from a rotary turntable onto a slat conveyor belt, where a bottle stopper/positioner actuates and aligns the bottles/vials/containers under each discharge nozzle and gives signal for dosing at preset counts. an independent micro logic controller or plc is provided to orchestrate the sequence of operation. The control system allows for individual setup of each dosing head in ‘single cycle’ operation, after which it can switch to ‘automatic run’. All automatic powder filling machine contact parts are manufactured from ss316 or ss 316l (on request at extra cost). Non contact parts, structure, cover and cladding is from ss304. The complete automatic powder filling machine adheres to cgmp principles. salient features : pre-set revolution control with digital display and feedback sensor/encoder for accurate individual control of auger revolution. Dynamic braking for precise fill weightautomatic powder level control to facilitate high consistency in weight controlweight variation ±2% max. Normally within 1%versatile can handle microdosing and dry syrup powder fillingcompact hence minimum space requiredquick interchangeability, easy to set bottle guide channels for changeovercounter provided to count number of fillsno bottle no fill system technical specifications : filling system : volumetric dosing by augerdosing range : 50mg – 75gmsdia of bottle : 20mm – 80mmheight of bottle : 150mm max.power consumption : 1.5 kw – 6 kw depending on number of headsweight variation : ± 2% max.interchangeable parts : as per client requirement

• featiures: Analyze production by weight zone or,Use 5 or more zones to get detailed fill weight information

A checkweigher is an automatic machine for checking the weight of packaged commodities online in dynamic condition. It is normally found at the offgoing end of a production process and is used to ensure that the weight of a pack of the commodity is within specified limits. Any packs that are outside the tolerance are taken out of line automatically. A checkweigher is a system that weighs items as they pass through a production line, classifies the items by preset weight zones, and ejects or sorts the items based on their classification. Checkweighers weigh 100% of the items on a production line. Typically, an infeed section, scale section, discharge section, rejecter or line divider, and computerized control comprise the physical checkweighing system. Checkweighers and their components vary greatly according to how they are used, the items being weighed, and the environment surrounding them. A checkweigher can weigh in excess of maximum items per minute (depending on product size and accuracy requirements). Checkweighers often incorporate additional checking devices such as metal detectors and X-ray machines to enable other attributes of the pack to be checked and acted upon accordingly.

• Usage: Filling Of Liquid
• Brand Name: Micron

Industrial Refrigeration offers Chilled Water System for food, pharma, & chemical industries. IRL manufactures Water Cooled Screw Chillers incorporating reliable screw compressors from Bitzer (Germany) and Frascold (Italy). These chillers are fully Microprocessor based suitable for process cooling applications from (+) 20˚C up to (-) 40˚C. For lower temperatures of up to (-) 50C look into Brine Chillers. These screw chillers are offered with up to 2 Nos. screw compressors in one machine but having separate and individual refrigeration circuits. These chillers are world class, manufactured in an ISO 9001, certified factory with an option of using CFC free refrigerants R-407C & R-134a complete with in-built Process pump and stainless steel chilled water expansion tank. These chillers are also rated for an ambient of up to (+) 50˚C and cooling tower water temperature up to (+) 37˚C at the inlet of the condenser. The various operating voltages of these chillers are: a) 380 / 400 Volt AC / 50 HZ b) 460 Volt AC / 50 HZ c) 380 Volt AC / 60 HZ d) 460 Volt AC / 60 HZ. Features : RELATED ALL TYPE CHILLER The glycol chillers, brine chillers, air cooled brine chillers, water cooled brine chillers and liquefiers offered by IRL are tailor made to suit customer requirement. IRL offers these low temperature Glycol / Brine up to an operating temperature of (-)50˚C for which compressors can be single stage open type / double stage open type / double stage semi hermetic / single stage screw depending on the size and the temperature requirement of the customer. For very low temperature application even Cascade systems are used for quick cooling. The material of construction is selected carefully depending on the application temperature and special alloys steel is used for ultra lower temperature application. These chillers can be air-cooled or water-cooled depending on the customer requirement. These chillers are rated for an ambient of (+) 480C and various operating voltages which are: a) 380 / 400 Volt AC / 50 HZ b) 460 Volt AC / 50 HZ c) 380 Volt AC / 60 HZ d) 460 Volt AC / 60 HZ Applications : Food processing industry Accelerating mould of plastic. Extending the life-span of mechanical components. Electronic industry and ultrasonic cleaning industry. Electroplating industry cooling to enhance precision of electroplating. Food processing industry cooling to enhance the quality of food. Advantages : Water temperature can be set at random from 0.5 degrees to 20 degrees. Intelligence control system can automatically adjust the load increasing and decreasing of the compressor to maintain outlet temperature in certain degree based on water temperature. The flow of water varies from 1.5m3/h to 24m3/h, which can meet different needs. Containerized structural design, which can be transported to places where refrigeration is needed.

We are one of the prominent Manufacturers and Suppliers of Cup Filling & Sealing Machine based in Mumbai (Maharashtra, India). Our Cup Filling & Sealing Machine is suitable for filling & sealing any size cup or box. It is ideal for filling any product such as cup mineral water, juice, or beverage, cup jelly, lassi, buttermilk, yogurt, shrikhand, honey, bean curd, etc. Any type of heat-sealable laminated foil is suitable as a sealing paper for this machine. We offer our Cup Filling & Sealing Machine at the most competitive rates.

• Material: Stainless Steel
• Material: Galvanized Steel
• Usage: Industrial
• Working Pressure: 150 kgf/cm2
• Inlet Pressure Gauge: 0-280 kg/cm²
• Outlet Pressure Gauge: 0-14 kg/cm²
• Computerized: No
• Control System: Manual
• Length: 300 x 200
• Water Capacity (Litres): 46.7 Litre (D-Type) Cylinder
• Gas Capacity: Min 2 Cylinder

We are offering solar water heater domestic use 125 liters to 500 liters for domestic use.

• Optimum Speeds Based: 1 litre pack size
• Capacities Ranging: 40 bottles /minute to 200 bottles /minute

Our in-depth knowledge and industrial expertise enable us to offer a distinguished range of Automatic Bottle Filling Machine. Following industry defined guidelines, our competent professionals manufacture the filling machine by using contemporary machines, latest technology and prime grade basic material. In order to ensure quality, the filling machine is meticulously tested upon a series of parameters. In tune with clients' diverse requirements, we offer this filling machine in a wide range of specifications.

• Voltage: 210-480 V
• Frequency: 50-60 Hz
• Usage/Application: Pharmaceutical Industry
• Body Material: Stainless Steel
• Capacity: 70 Piece per Min
• Automation Grade: Automatic

• TECHNICAL SPECIFICATION OF MACHINE:: Product Characteristics
• Powder form: Hopper Capacity
• 25 Liters: Weighing Range
• 5g to 5kg.*: Output
• 72-1200  kg/hour.: Type of film
• Heat sealable laminated plastic: Power Requirement
• 415 VAC, Three phase: Material Construction
• All contact parts SS304 & other parts of MS.: Roll width(mm)
• 75 – 450: Pouch length ( mm)
• 150 to 330: Vertical seal width(mm)
• 10/15 typical: Horizontal Seal Width(mm)
• 10/15 typical: Dimensions ( Floor Area)
• 20 sq feet: Dimension ( Height)
• 9 ft (Without Screw conveyor): Power Supply
• 3 Phase, 415 VAC: Air supply
• 2 HP, 8 Bar Compressor: Film Draw mechanism
• Servo /Stepper motor drive: Horizontal sealing mechanism
• Pneumatic: Vertical seal mechanism
• Pneumatic: Auger Screw Drive
• Servo Drive: Hopper capacity
• 25 Liters: Material of Construction

Instead of conventional vertical form fill seal machines, this is horizontal flow packing machine. This machine is a special floor design, which can form only 4 side seal pouches. Instead of vertical travel of the packing roll, roll will be folded horizontally where as per design pouch width is actually pouch length or pouch travel. Dropping of product time and travel is reduced in this model, because chute enters in open pouch and drop the product in formed pouch. Machine is mostly suitable for products which are rectangular shaped like medical kit, tissue papers, micro doses, hardware, bearing or brake pads. Also suitable for all liquids, powders and paste products. Very compact and dedicated design, available in pneumatic as well as mechanical servo driven model. Vertical, horizontal sealing, product filling all synchronized and actuated pneumatically with all latest technology gadgets of Bosch Rexroth. Pouch length is controlled by Schneider make servo motor and 2 axis latest technology. Machine height is a ground floor model, where operator can view all operations and feed the product at manually at standard human height. We are leading Horizontal Form Fill Seal Machine manufacturer and supplier in Navi Mumbai, India. Contact us to know the best price of Horizontal Form Fill Seal Machine

• Features: Easy to operate, Accuracy in working, Low maintenance
• Filling Speed for aluminum: 80 to 90 tube per/min
• Filling Speed for lami: 60 to 70 tube per/min
• Filling range: 5 to 50 gm interchangeable syringe and piston
• Tube size: Max. Dia - 25 mm length
• Operator require: One operator
• Power consumption: 6 Kw
• Compressor air: 6 to 7 kg/PSI
• Net weight: 500 kg
• Gross weight: 600 kg
• Dimension: L - 48”, W - 36”, H - 96”

We have a range of water borne adhesives to suit every type of application. They are based on Natural and Synthetic sources offering superior adhesion, above average shelf life, ideal pH values and a range of viscosities. Being water based, our adhesives are not only easy to wash-off but also devoid of harmful organic emissions and safe to use. Besides our standard products, we are also in a position to offer you tailor made adhesives to suit your requirement and delivered at your convenience, to your doorstep. AdhesivesNatural - Our adhesives are manufactured from good quality starch sourced from quality manufacturers in India and abroad. This starch is obtained from cereal grains or tubers namely Corn and Tapioca. However the ability to formulate adhesives of higher solids generally accounts for the greater use of dextrines (modified starch) over starches. These adhesives give faster tack development, rapid drying and increased production rates. Our adhesives possess a wide range of solution properties, each having its own special characteristics. AdhesivesSynthetic - We manufacture synthetic adhesives at consistent properties and which are resistant to moisture and also dry faster. In addition, we modify them in many ways and are often combined to obtain the best characteristics for a particular application. They possess a clean behaviour, impart strength and flexibility and have greater spread on an adherend surface, thereby making them very viable as alternatives to natural adhesives.

• Brand Name: Sunlight
• Material: Stainless Steel
• Model Number: SGEPL-XR
• Warranty: 12 months
• Weight: 1 Kg
• Mounting Type: Wall Mounting
• Gas Type: Nitrogen
• Rated Flow: 250 LPM
• Inlet Pressure Range: 250 bar
• Outlet Pressure Range: 200 bar
• Number Of Cylinder: 1

Ion Exchange is the reckoned entity engaged in manufacturing and supplying varied collections of Water Treatment Plants in India.

• Material: Stainless Steel
• Voltage: 440 V
• Frequency: 50-60 Hz
• Phase: Three Phase
• Power Source: Electrical
• Machine Type: Automatic 

packaging juicer machine bottle filling machine, Pharmaceutical Machine

We manufacture drum filling machine and systems for accurate filling of any liquid, oil, jerry cans, pails, barrelstotes.

We are offering Daenas produces under the name KOORMUS, its range of 1]Big Bag filling station. Features: 1)Easy positioning of Big Bag. 2)Automatic lifting system. 3)High flow & Low flow charging (refining). 4)Automatic & manual control system. 5)Adaptable to any measure of Big Bag. 6)Blowing system for Big Bag with internal pockets. 7)Dust collection. 2]Big Bag Discharges Features: 1)Versatility in raising big bag: Model truck , Model Electric Hoist 2)Sealed System Dump 3)Tensioning mouth by cylinders 4)Adjustable height 5)Help system for Unloading: Tray Vibrant, Massage winds 6)Dust Collection Industries: Food,Chemical,Fine Chemical(Plastics,Petrochemicals..),Pharmaceutical Application:- Load and Unload : Silo,Mixes,Reactor,Centrifuged,Hopper

Vacuum Filling Machine, Multipurpose Reaction Assembly, Jet Mill

Gas Cylinder Manifold is a high pressure structure specially fabricated for interconnecting two or more numbers of cylinders to a common gas supply line when consumption of gas is high. Manifold interconnects two or more number of cylinders for the purpose of availability of more gas at source. The Gas Manifold pressure can be reduced to operatable pressure by a pressure regulator. The pressure regulators can be conned to two manifolds resulting in changeover of manifolds. The changeover can happen manually or automatically changing the gas supply from one bank of cylinders to the other bank without interrupting the continuity of the supply. Manifolds comprise a control panel, manifold racks, tailpipes and an isolation valve and a pressure relief valve. Excelgas supplies custom made gas specific manifolds for all types of applications.

Cryogenic Vaporizers, lpg vaporizers, propane heaters, lpg heaters

Semi-Automatic Bagging Machine, Powerised Roller Conveyor

Water Treatment Plant, Pressure Filter, Pressure Filter

Weighmetric Liquid Filling Machine, Dry ice (co2) machine

We are a company which is engaged in the supply of Turn Table